Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [161 - 180 of 2702]

Compressor

Boge C 15 LDR-350

Germany

2017

used

on request

INNO30908

An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.

Roller Coating Machine

Trivec Rollercoater TRV-450-C duo

Germany

2015

used

on request

INNO30907

A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible.

Thin-Cut Frame Saw

Neva Orbit Plus 350

Germany

2017

used

on request

INNO30905

A Neva lamella saw with a saw frame movement methodology is available. Frame stroke: 210mm, stroke rate: 450/min, max. cutting height: 350mm, max. working width: 155mm, max. lamella length: 155mm, min. lamella thickness: 1.5mm, rollers bottom/top: 11/4, production capacity per 8h: approx. 550m²-800m², max. feed speed: 2m/min. Machine dimensions X/Y/Z: approx. 2600mm/800mm/2000mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.

Industrial Robot

Mitsubishi RV-3SDB S15

Germany

2011

used

on request

INNO30904

An industrial articulated robot Mitsubishi including control unit, teaching box and work table is available. Payload: 3.5kg, axes: 6, reach: 642mm, repeatability: +/-0.02mm, upper arm length: 245mm, forearm length: 270mm, weight: approx. 40kg. Documentation available. An on-site inspection is possible.

Mixing System

Bohle PM 1000

Germany

2004

used

on request

INNO30902

A Bohle container mixer is available. Mixing load: 900kg, Container volume: approx. 800l, Usable filling degree: 85%, Mixer speed: 6rpm, Container diameter: 1100mm, Machine height: 2800mm. An on-site inspection is possible.

Injection Moulding Machine

Engel ES 330/80

Germany

1996

used

on request

INNO30901

Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible.

Welding Machine

Merkle TIG Insquare W600 AC/DC

Germany

2016

used

on request

INNO30899

An industrial TIG welding power source Merkle in AC/DC version is available. Insulation class: S, Cooling: AF, Voltage: 400V, Power factor: 0.95. Documentation available. An on-site inspection is possible.

CNC Lathe

Index G200

Germany

1995

used

on request

INNO30898

A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible.

Band Saw

Amada HDA-250

Germany

unknown

used

on request

INNO30897

A fully automatic hydraulic horizontal band saw Amada in scissor design is available. Round cutting capacity: 254mm, rectangular cutting capacity: 254mm/279mm, saw band dimensions X/Y/Z: 3505mm/27mm/0.9mm, speed: 80m/min, feed: 390mm/stroke, max. cutting length: 3500mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/1500mm, weight: approx. 1250kg. An on-site inspection is possible.

Plate Shear

Wieger SW3a

Germany

1964

used

on request

INNO30896

Sheet stop: 1000mm, max. cutting thickness: 10mm, cutting length: 3000mm, weight: approx. 8500kg. The machine complies with accident prevention regulations. The blades must be turned and reground. The drive motor was replaced 4 years ago. Documentation available. An on-site inspection is possible.

Refrigerated Container

Carrier Transicold 69NT40

Germany

2008

used

on request

INNO30895

A total of seven refrigerated containers with Carrier Transicold refrigeration units are available. Refrigerant: R-134a, Temperature control min./max.: -35°C/30°C, Oil filling quantity range: 1.7-3.6l, Refrigerant filling quantity range: 5.6-40kg, Control: Micro-Link. 1) Carrier Transicold 69NT40-551, Year of manufacture: 2008. 2) Carrier Transicold 69NT40-551, Year of manufacture: 2008. 3) Carrier Transicold 69NT40-561, Year of manufacture: 2014. 4) Carrier Transicold 69NT40-541, Year of manufacture: 2012. 5) Carrier Transicold 69NT40-551, Year of manufacture: 2008. 6) Carrier Transicold 69NT40-551, Year of manufacture: 2008. 7) Carrier Transicold 69NT40-541, Year of manufacture: 2012. All containers are 40 feet long. Documentation available. An on-site inspection is possible. Package sale is preferred.

Gripper

Schunk Co-act EGP-C 64-N-N-FCRXEK

Germany

2021

used

on request

INNO30893

Two like-new and originally packaged small parts grippers Schunk for cobots (collaborative robots) are available. Payload: 1150g, number of fingers: 2, stroke: 20mm, max. gripping force: 230N. Machine dimensions X/Y/Z: approx. 161.2mm/125.5mm/86.4mm, weight: approx. 1380g. Documentation available. An on-site inspection is possible.

Mixing System

Konus

Germany

unknown

used

on request

INNO30892

A freestanding double cone mixer with double-sided bearing support from an unknown manufacturer is available. Capacity: approx. 1000kg. Grinding concentrates (abrasive powders etc.) were mixed with it. No documentation and no CE marking. An on-site inspection is possible.

CNC Vertical Turning Machine

Index V200

Germany

1996

used

on request

INNO30890

Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. Documentation available. On-site inspection is possible.

Capping Machine

Kematec MBK 1 AR

Germany

2021

used

on request

INNO30888

Some plant components from a bottle filling plant are available. 1) Indexed rotary bottle capper Kematec MBK 1 AR. 2) Belt station Cornelis Costamat-PP-1. 3) End-of-line packaging machines Normpack. An on-site inspection is possible. The offer is not a complete line, but plant components that have been decommissioned.

CNC Milling Machine

Deckel Maho DMU 35 M

Germany

1999

used

on request

INNO30887

A CNC vertical milling machine Deckel Maho (DMG Mori) is available. Travel path X/Y/Z: 350mm/250mm/340mm, B-axis: 90°, C-axis: 360°, speed: 5000rpm, table dimensions X/Y: approx. 400mm/280mm, max. workpiece weight: 100kg, tool holder: SK40, feed rate: 5m/min. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 1600kg, control: Siemens. Documentation available. An on-site inspection is possible.

Vertical Eroding Machine

Charmilles Roboform 350

Germany

2004

used

on request

INNO30886

A CNC die-sinking EDM machine Charmilles without counter is available. Travel path X/Y/Z: 350mm/250mm/300mm, C-axis: 360°, tool positions: 4, quill stroke: 300mm, table dimensions X/Y: 500mm/400mm, max. workpiece weight: 500kg, max. workpiece dimensions X/Y/Z: 780mm/550mm/370mm, surface quality: approx. Ra 0.1µm, max. electrode weight: 50kg, tank usable volume: 160l, total tank volume: 410l. Machine dimensions X/Y/Z: approx. 1900mm/1700mm/2550mm, weight: approx. 250kg. Documentation available. An on-site inspection is possible.

Fully Automatic L-Sealer

Smipack FP8000CS/GH2000-600

Germany

2016

used

on request

INNO30885

A fully automatic L-seal packaging machine Smipack including an infeed conveyor GH2000/60 is available. Packaging capacity: 35packages/min, film type: PO/PE, film thickness range: 10µm-30µm, CS version: automatic height adjustment, max. product height: 250mm, max. product width: 800mm, max. product length: 600mm, max. film width: 850mm, max. film roll diameter: 350mm, conveyor length: 2000mm, conveyor width: 600mm. Machine dimensions X/Y/Z: approx. 2650mm/1900mm/1800mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.

CNC Coordinate Measuring Machine

Keyence VL-500/VL-570

Germany

2023

used

on request

INNO30884

A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.

External Cylindrical Grinding Machine

Smwfortuna/jung AGL 125-5PC/RSE300-II/D14

Germany

1970

used

on request

INNO30883

A total of three cylindrical grinding machines and one internal cylindrical grinding machine are available. 1/2) Two identical cylindrical grinding machines SMW AGL 125/5PC, year of manufacture: approx. 1970, center height: 160mm, max. workpiece width: 63mm, max. workpiece diameter: 180mm, speed: 1000rpm, machine dimensions X/Y/Z: approx. 2800mm/2800mm/2400mm, weight: approx. 5500kg. 3) Cylindrical grinding machine Fortuna RSE300/II, max. grinding wheel diameter: 300mm, grinding length: 600mm, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1550mm, weight: approx. 2000kg. 4) Internal cylindrical grinding machine Jung D14 MP7z, grindable bore: 8mm-10mm, max. grinding depth: 150mm, swing diameter: 450mm, workpiece spindle bore: 35mm, max. swiveling range: 30°, machine dimensions X/Y/Z: approx. 2700mm/1300mm/1700mm, weight: approx. 2500kg. An on-site inspection is possible. Individual sale possible.