▷ Used metalworking machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Metal processing machines [1 - 20 of 878]

Positioner

Bode 25VP

Germany

2003

used

on request

INNO28195

Load capacity: 25t, center of gravity distance: 700mm, eccentricity: 250mm, speed: 0.66rpm, tilt range: 0°-130°, tilt time: 120s, table height (flat): 1930mm, axis of rotation height: 1600mm, table diameter: 2500mm, motor power tilt/rotate: 7.5kW/4.5kW, total length: 3000mm, total width: 2500mm. Documentation available. On-site inspection is possible.

CNC Machining Center

Stama MC 531

Germany

2001

used

on request

INNO28183

Travel X/Y/Z: 800mm/400mm/350mm, rapid traverse X/Y/Z: 45m/min, feed force X/Y/Z: 7kN/7kN/12kN. Tool holder: SK40, speed: 12000rpm, spindle power: 21kW. Tool positions: 60, max. tool diameter: 125mm, max. tool length: 250mm. Machine dimensions X/Y/Z: approx. 4200mm/6200mm/3300mm, weight: approx. 7200kg, control: Siemens. The workpiece spindle of the machine is defective. Documentation available. On-site inspection is possible.

CNC Turret Lathe

Froriep KE-Super

Germany

1955

used

on request

INNO28182

A Froriep horizontal vertical lathe that was completely overhauled in 2009 is available. Faceplate diameter: 1250mm, turning height: 1100mm, circulation diameter over bed: 1400mm, power: 38kW, container volume: 1000l, control: Siemens S7. The machine has undergone extensive mechanical and electrical overhauls, including a new lubrication and cooling system and a new paint job. Documentation available. On-site inspection is possible.

Radial Drilling Machine

Mas VO 32

Germany

1992

used

on request

INNO28172

Arm length: 1000mm, max. drilling diameter steel/cast iron: 32mm/40mm, spindle stroke: 250mm, spindle holder: MK4, max. tapping capacity: M20, spindle table distance min./max.: 270mm/1040mm, table dimensions X/Y/Z: 1150mm/800mm, speed: 4500rpm. Machine dimensions X/Y/Z: approx. 1700mm/1100mm/2600mm, weight: approx. 2000kg. The emergency stop switch of the machine is defective. Documentation available. On-site inspection is possible.

CNC Machining Center

Stama MC 326

Germany

2009

used

on request

INNO28167

Travel X/Y/Z: 520mm/360mm/360mm, distance table-spindle nose min./max.: 305mm/665mm. Tool holder: SK40, speed: 10500rpm, torque: 60Nm, spindle bearing diameter: 65mm. Table diameter: 1250mm, T-slot width: 14mm, T-slot spacing: 150mm, table height: 795mm, max. workpiece weight: 2x 180kg. Tool positions: 48, max. tool diameter: 140mm, max. tool length: 300mm. Feed X/Y/Z: 60m/min, max. feed speed: 10m/min, feed force X/Y/Z: 4000N/4000N/8000N. Machine dimensions X/Y/Z: approx. 4300mm/5200mm/3200mm, weight including chip conveyor: approx. 7300kg, control: Fanuc 18i, operating hours: 75970h, parts quantity: 1,354,141. Including work area extraction system, paper belt filter, 40bar IKZ and 90bar hydraulic unit. Documentation available. On-site inspection is possible. Expected to be available from mid-February 2025.

Pneumatic Press

Mäder XL-DA 5600-80-300

Germany

2018

used

on request

INNO28166

A Mäder direct-acting compressed air press is available. Pressing force at 6bar: 56kN, max. stroke length: 80mm, compressed air input min./max.: 3.2bar-6bar, max. tool dimensions X/Y: 310mm/220mm, max. tool weight: 14kg, total stopping time: 0.1s. Projection of press head/press frame: 150mm/300mm, working height: 195mm-290mm, table dimensions X/Y: 190mm/190mm, operating hours: 59h. Pressure cell included. Documentation available. On-site inspection is possible.

Lapping Machine

Flp Microfinishing FLP ES 900/3

Germany

2021

used

on request

INNO28163

A reconditioned lapping machine (single-disc fine grinding machine) FLP Microfinishing GmbH is available. Outer diameter of the working discs: 914mm, inner diameter of the dressing ring: 368mm, working disc speed: 80rpm, max. workpiece diameter: 295mm, working stations: 3, motor drive: 2.2kW, lapping medium capacity: 15l. Machine dimensions X/Y/Z: approx. 1200mm/1400mm/1300mm, weight: approx. 1000kg, control: conventional. Documentation available. On-site inspection is possible.

Surface Grinding Machine

Göckel GB 65 el

Germany

1999

used

on request

INNO28162

A Göckel precision surface grinding machine without coolant system is available. Grinding length: 5100mm, grinding width: 300mm, grinding height: 180mm, grinding power: 30kW. Table dimensions X/Y/Z: 5100mm/300mm/180mm, table tilt: +/-90°, sanding head speed range: 0.02m-30m/min, step setting: 0.005mm-0.2mm. Including additional unit with cup grinding wheel (180° swivel), magnetic cover bellows for the complete grinding area, grinding mist extraction with pocket filter, new guideway bearings on the grinding carriage, a Baumüller control unit, mounting flanges for DIA/CBN, ceramic grinding rings, a segment grinding head with a diameter of 450mm and abrasives. Documentation available. On-site inspection is possible.

CNC Oxygen Cutting Machine

Messer Cutting MultiTherm Eco 3600

Germany

2021

used

on request

INNO28160

Track width: 3600mm, table dimensions: 6200x2300/ 3200x2500mm, max. workpiece thickness: 150mm, length: 10,700mm, width: 5070mm, height: 1980mm. With four oxyfuel torches, bevel cutting, segment-by-segment extraction of the areas where firing takes place, automatic gas setting (OmniFlow) for cutting oxygen (max. 15bar), heating oxygen (max. 10bar), fuel gas (max. 2bar), ALFA MS 4452/250 machine cutting torch, OmniWin2021 software. Available from February 2025, an inspection on site is possible.

CNC Horizontal Machining Center

Deckel Maho DMC 70H duoBlock

Germany

2006

used

on request

INNO28159

X-axis: 700mm, Y-axis: 800mm, Z-axis: 800mm, max. spindle speed: 10,000/min, tool holder: SK 40, number of tool positions: 45, pallet diameter: 2x 500x500mm, path control: Siemens 840D power line 3D, connected load: 60kVA, operating/spindle hours: 48,339/ 27,766h. Has been regularly serviced by the manufacturer, during the regular replacement of the rotary union it was found that the clamping force of the spindle holder is 3 kN, this must be repaired. On-site inspection is possible.

Heat Treatment System

Paddeltherm

Germany

2003

used

on request

INNO28157

Length: 21,000mm, width: 5000mm. With 3 chest ovens and heatable water bath, with rail system above the ovens, with 2x 8 fans as air cooling unit, switch cabinets Schneider E-Technik Offenburg with S7 1500, was completely overhauled in 2019. On-site inspection is possible.

Cleaning Machine

Silberhorn Multijet S3

Germany

2018

used

on request

INNO28156

Wash basket dimensions: 2x 630x560x200mm, cleaning agent: aqueous cleaner, filling capacity: 3750l, max. back-up fuse: 250A, mains connection: 230/400VAC, connected load: 175kW, control panel: Janitza UMG 96 RM. On-site inspection is possible.

Circular Table Grinding Machine

Blanchard 42-84

Germany

1962

used

on request

INNO28155

Table diameter: 2133.6mm, grinding head diameter: 1066.8mm, switch cabinet dimensions: 1200x500x2000mm, length: 2700mm, width: 6300mm, height: 4300mm, weight: 35t, including documentation, circuit diagram and history, plus photos of overhaul and repair, geometric overhaul and new switch cabinet in 2005, repair in May 2017, grinding head rewound, stator/ three-phase armature overhauled, grinding shaft/ king shaft overhauled, head with new bearings.

Section Shear

Peddinghaus Peddimax 601

Germany

1997

used

on request

INNO28154

Punching force: 600kN, stroke, infinitely adjustable: 10-50mm, stroke rate with 20mm hole punch: 29/min, punching throat depth: 400mm, working height: 1100mm, max. cutting capacity: 400x16mm, max. L-steel (90° cut): 130x12mm, max. round steel diameter: 40mm, diameter square steel: 40mm, max. sheet thickness: 13mm, blade width: 65mm, blade depth: 85mm, drive power: 7.5kW, weight: 1.78t. Already dismantled, ran until the end, with tools, an on-site inspection is possible, with documentation and spare parts list, was regularly serviced.

Rotary Transfer System

Buffoli 3D-TR-8-4 CNC

Germany

2017

used

on request

INNO28153

A fully automatic rotary transfer system with a Buffoli transfer machine is available. Processes: Loading/contour milling/drilling/chamfering/reaming/pressing. The finished parts are packed, labeled and palletized. Automation: Evolut, robots: Kuka, replenishment control: Kanban. Documentation available. On-site inspection is possible.

CNC Tool Milling Machine

Deckel Maho DMF 220 linear

Germany

unknown

used

on request

INNO28147

A 5-axis CNC tool milling machine DMG Mori is available. Travel X/Y/Z: 2200mm/560mm/720mm, B-axis: +/-100°, speed: 1800rpm, tool holder: SK40, power at 40%: 35kW, rapid traverse X/Y/Z: 100m/min / 50m/min / 50m/min, feed: 50m/min, table dimensions X/Y: 2600mm/600mm, max. table load: 2200kg, control: Siemens 840D powerline with ShopMill.Table load: 2200kg, control: Siemens 840D powerline with ShopMill. The motor spindle, the Y-axis linear guide and the storage bladder of the machine were replaced in 06/2024.

Punching Machine

Bihler GRM-80

Germany

1983

used

on request

INNO28143

Two almost identical cam-controlled Bihler automatic punching and bending machines are available. 1) Punching and bending machine Bihler GRM-80, year of construction: 1983, material feed: right with feed time reduction, max. feed length: 500mm, max. strip width: 80mm, max. wire diameter: 6mm, pressing force: 250kN, production speed: 10-250 pieces/min. Machine dimensions X/Y/Z: approx. 3200mm/1600mm/2250mm, weight: approx. 3000kg. Including slide unit and press. 2) Punching and bending machine Bihler GRM-80, year of manufacture: 1980, material feed: right with feed time reduction, max. feed length: 500mm, max. strip width: 80mm, max. wire diameter: 6mm, press force: 250kN, production speed: 10-250 pieces/min. Machine dimensions X/Y/Z: approx. 3200mm/1600mm/2250mm, weight: approx. 3000kg. Including slide unit and press. Documentation available. On-site inspection is possible.

CNC Tool Milling Machine

Maho MH 600 S

Germany

1989

used

on request

INNO28142

Travel X/Y/Z: 600mm/400mm/400mm, speed: 4000rpm, tool holder: ISO40, tool positions: 24, drive power: 4kW, machine dimensions X/Y/Z: approx. 2900mm/2500mm/2000mm, weight: approx. 2600kg, control: CNC 432, operating hours: 30347h. Documentation available. An on-site inspection is possible. The machine was completely overhauled in 2008 (including cables, axes, tool changer etc.).

CNC Machining Center

Deckel Maho DMU80 monoBLOCK

Germany

2006

used

on request

INNO28141

Travel X/Y/Z: 880mm/630mm/630mm, feed: 15m/min, rapid traverse: 30m/min, B-axis swivel range: -120°/+30°, C-axis rotation range: 360°, speed: 12000rpm, spindle power: 15kW, spindle mount: SK40. Table dimensions X/Y: 1250mm/700mm, max. table load: 1000kg, NC rotary table diameter: 700mm. Tool positions: 32, max. tool diameter: 80mm/130mm, max. tool length: 315mm, max. tool weight: 8kg. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/2500mm, weight: approx. 10000kg, control: Heidenhain iTNC530, operating hours: 58651h, spindle hours: 20775h. Including belt filter system and chip conveyor. The guides of the X and Y axes may need to be replaced. Documentation available. On-site inspection is possible.

Wire EDM Machine

Sodick LP250L/LP2W

Germany

2011

used

on request

INNO28140

Travel X/Y/Z: 250mm/150mm/120mm, U-/V-axis: 35mm/35mm, max. workpiece size: 400mm/270mm/100mm, max. workpiece weight: 80kg, wire diameter range: 0.05mm-0.20mm, wire tension range: 3N-18N, max. wire speed: 250mm/s, taper angle at 100mm workpiece thickness: +/-7°, working dimensions X/Y/Z: approx. Wire speed: 250mm/s, taper angle at 100mm workpiece thickness: +/-7°, working height: 1080mm, machine dimensions X/Y/Z: approx. 1900mm/2700mm/2100mm, weight: approx. 3800kg, operating hours: 35106h. Including jumbo feeder and external filter system gray hair. Without clamping device. Documentation available. On-site inspection is possible.