Used machines Germany - Innovac GmbH

Ground Scale

Germany

unknown

used

on request

INNO28533

An older floor scale is available. Minimum weighing weight: 25kg, max. weighing weight: 1500kg, weighing accuracy: 0.5kg. On-site inspection is possible.

more

Stretch Wrapper

Cyklop Robopac T

Germany

1993

used

on request

INNO28532

Two identical Cyklop stretch trolleys are available. Charger included. The machines have not been used since 2018. On-site inspection is possible.

more

CNC Universal Lathe

Mag Ias DUS 800 ti/6000

Germany

2013

used

on request

INNO28531

Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible.

more

Degreaser

Branson B452R

Germany

unknown

used

on request

INNO24984

Heating output: 2000W, ultrasonic frequency: 40kHz, weight: 275kg.

more

Granulate Dryer

Motan LS 120/0-0+0-0

Germany

unknown

used

on request

INNO28530

Dry air volume: 120m³/h, connected load: 15.4kW, heat output: 10.5kW. On-site inspection is possible.

more

Rotary Lift Station

Kuttler PR-90 LS150

Germany

2008

used

on request

INNO28529

A Kuttler automatic handling machine that moves workpieces or material blanks on a production line is available. Infeed height: 1050mm, outfeed height: 900mm, cutting and turning range: 90°, workpiece lowering: 150mm, machine dimensions X/Y/Z: approx. 14500mm/1000mm/2100mm, weight: approx. 750kg. Documentation available. On-site inspection is possible.

more

Heavy-duty Trailer

Kampe SLA VRA 54265

Germany

2022

used

on request

INNO28528

Payload: 20000kg, speed: 6km/h, loading area height: approx. 2560mm, total height: approx. 3330mm, tare weight: 3325kg. Includes a matching roof. The roof is connected at 4 points with 4 screws and can be removed as required. Documentation available. On-site inspection is possible.

more

CNC Press Brake

Fasti 940-200-40

Germany

1998

used

on request

INNO28527

Working width: 4000mm, pressing force: 2000kN, max. operating pressure: 30MPa, connected load: 22.38kW, protective distance: 156mm, holding time: 98ms. Documentation available. On-site inspection is possible.

more

Quick Lathe

Okuma LS 450

Germany

unknown

used

on request

INNO28526

Center height above bed/slide: 450mm/250mm, center distance: 850mm, spindle bore: 52mm, travel X/Z: 270mm/140mm, quill stroke: 150mm, quill diameter: 80mm. Machine dimensions X/Y: approx. 2400mm/1200mm, weight: approx. 2500kg. Some of the gears are defective, which means that the speeds cannot be operated. Documentation available. On-site inspection is possible.

more

Panel Saw

Scm-d SI 150

Germany

1994

used

on request

INNO28525

Saw blade diameter: 400mm, max. cutting height at 90°: 140mm, max. cutting height at 45°: 97mm, speed: 5000rpm, saw blade swivel range: 0°-45°, sliding table length: 3200mm, sliding table width: 360mm, table dimensions X/Y/Z: 940mm/560mm/900mm, scoring saw blade diameter: 120mm, speed: 9200rpm, machine weight: approx. 750kg. On-site inspection is possible.

more

CNC Machining Center

Mazak VTC-200B

Germany

2000

used

on request

INNO28524

Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle-table distance: 180mm-690mm, spindle center-to-column distance: 530mm, spindle mount: SK40, spindle power: 15kW/11kW, spindle speed: 10000rpm, tool positions: 24, feed: 8m/min, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 3350mm/2900mm/2800mm, weight: approx. 6000kg, control: Mazatrol 640M. On-site inspection is possible.

more

Edge Milling Machine

Hebrock AKV 83

Germany

1994

used

on request

INNO28523

A Hebrock edge milling machine is available. Workpiece height range: 10mm-50mm, max. edge thickness: 1mm, min. workpiece width: 50mm, min. workpiece length: 170mm, feed speed: 4m/min, connected load: 3kW. Machine dimensions X/Y/Z: approx. 1750mm/700mm/1250mm, weight: approx. 120kg. On-site inspection is possible.

more

Suction Unit

Spänex Additor-K-II-II-VU-15-SBU-165-S2-000

Germany

1995

used

on request

INNO28522

Volume flow: 4080m³/h, filter area: 34m², BIA category: G, differential pressure: 1650Pa, filtration surface load: 120m³/h-m², air density: 1.2kg/m³, operating temperature: 20°C. Documentation available. On-site inspection is possible.

more

Envelope Printing Machine

Winkler + Dünnebier Helios 135

Germany

1967

used

on request

INNO28521

A Winkler + Dünnebier envelope printing machine is available. Envelope type: peel & seal gumming, format range side seam min./max.: 114mm x 150mm/330mm x 450mm, format range center seam min./max.: 114mm x 150mm/230mm x 450mm, paper weight range: 70g-165g/m², production output: 250 envelopes/min. Including vacuum pump and blow air pump. Documentation available. On-site inspection is possible.

more

CNC Vertical Turning Machine

Emag VL 5 m LT

Germany

2003

used

on request

INNO28520

An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible.

more

Trough Dryer

Fst Drytee VE-1

Germany

2013

used

on request

INNO28519

Two identical Drytee drying machines are available. Useful chamber dimensions X/Y/Z: 700mm/1400mm/1150mm, external dimensions X/Y/Z: approx. 1350mm/1600mm/1800mm, heating capacity: 36kW, operating temperature: 90°C, heating medium: thermal oil, heating medium temperature: 140°C, air circulation rate: 3x5200m³/h. Documentation available. On-site inspection is possible.

more

Filter Press

Häcker 02.040

Germany

unknown

used

on request

INNO28518

Two identical Häcker chamber filter presses are available. Plate dimensions X/Y: 400mm/400mm, max. filtration pressure: 10bar, max. closing pressure: 10bar, filter cloth type: push-through filter cloths, hydraulic oil: HLP-D ISO 22, oil filling quantity: approx. 2.1l, automatic control: 10.218. Documentation available. On-site inspection is possible.

more

Flexo Printing Machine

Fischer & Krecke Flexpress 16S-8

Germany

2005

used

on request

INNO28517

A complete 8-color Fischer & Krecke flexographic printing system is available. Number of colors: 8, max. print width: 1250mm, max. material width: 1300mm, repeat print length min./max.: 320mm/800mm, max. mechanical speed: 360m/min, printable materials: PET (min. 12µm)/PP/OPP/LDPE/laminate materials. Inks: solvent-based, drying: thermal oil. Roll diameter: 800mm, core diameter: 76mm/152mm. Including BST Video Web Inspection System Premius, cleaning system Flexpress AutoClean (ACA), viscosity control Bloss Viscolor 1300, automatic roll change and rewind Flying Splice as well as an additional chill roll with a diameter of 460mm. Documentation available. On-site inspection is possible.

more

Stud Welding Machine

Soyer KTS-1050 CNC

Germany

2022

used

on request

INNO28516

A Soyer stud welding machine is available. Table dimensions X/Y: 1000mm/1540mm, clamping surface X/Y: 800mm/1020mm, max. table load: 100kg, travel X/Y/Z: 800mm/1020mm/300mm. Positioning speed: 400mm/s, positioning accuracy: +/-0.15mm, repeat accuracy: +/-0.05mm, stud and pin diameter range: 3mm-10mm, max. stud and pin length: 40mm. Machine dimensions X/Y/Z: approx. 1500mm/2050mm/2000mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

more

Milling Machine

Wmw FSS 315-V

Germany

unknown

used

on request

INNO28515

Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible.

more