Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [181 - 200 of 2469]

Corner Crimping Press

Elumatec EP124

Germany

1999

used

on request

INNO28023

Pressing force: 70kN, press height: 140mm, drive: pneumatic, compressed air: 7bar, air consumption: approx. 35l/cycle, machine dimensions X/Y/Z: approx. 1100mm/1000mm/1250mm, weight: approx. 550kg. Documentation available. On-site inspection is possible.

Clamp Jaw Elevator

Gronemeyer

Germany

unknown

used

on request

INNO28022

A vertical upward clamping jaw elevator and a vertical downward clamping jaw elevator in stainless steel design are available. This is a conveyor system for overcoming height differences in production lines. Bottles, jars, cans and also cartons etc. can be conveyed upwards and downwards. (1) Upward elevator, output: 14,000 cans/h (empty containers open), speed: 25m/min, format diameter: 100mm, format height: 50-80mm (400g), total length with infeed and outfeed section: 2500mm, frame width: 1050mm, infeed height: 900mm, outfeed height: 2600mm, height difference: 1700mm, drives: frequency-controllable, motor power: 1.1kW. (2) Downward elevator, output: 14,000 cans/h (empty cans open), speed: 25m/min, format diameter: 100mm, format height: 80mm (400g), total length with infeed and outfeed section: 2500mm, frame width: 1050mm, infeed height: 900mm, outfeed height: 2600mm, height difference: 1700mm, drives: frequency-controllable, motor power: 1.1kW. On-site inspection is possible, were completely overhauled in the past.

Eccentric Press

Bihler GRM 50

Germany

unknown

used

on request

INNO28020

Stroke rate: 250/min, press force: 250kN, stroke: 16mm. Including press with 2 slides, reel, welding device with cooling unit and automatic nut feeder. Documentation available. On-site inspection is possible.

CNC Laser Cutting Machine

Trumpf TLC 1050

Germany

2000

used

on request

INNO28019

Laser power: 4kW (4000W), travel X/Y/Z: 4000mm/1500mm/500mm, C-axis: 360°, table dimensions X/Y: 3000mm/1500mm, connected load: 90kVA, machine dimensions X/Y/Z: approx. 9000mm/5000mm/3000mm, weight: approx. 10000kg, laser hours: 34879h. The resonator is defective. Documentation available. On-site inspection is possible.

CNC Fine Blanking Press

Smg/kohler HFA 4000/VRM65

Germany

1988

used

on request

INNO28012

A punching line with coil reel, straightening station and press is available. 1) Fine blanking press SMG HFA 4000, year of manufacture: 1988, press force: 4000kN, ring punch force: 320kN-3200kN, counterholder force: 130kN-1300kN, ram stroke: 30mm-150mm, tool clamping area X/Y top/bottom: 900mm x 900mm / 910mm x 1350mm, max. tool height: 410mm, number of strokes: 40/min, weight: approx. 31000kg, control: Siemens S5. 2) Coil reel Kohler. 3) Kohler VRM.65.260/21-H3500 straightening station, year of manufacture: 1991, including loading trolley, units, feed roller, Raziol Ebade oiling unit, running platform, switch cabinets and oil mist extraction system. Documentation available. On-site inspection is possible.

Eccentric Fineblanking Press

Schaal SEP25

Germany

1981

used

on request

INNO28011

A punching line with reel, strip straightening station and fineblanking punch is available. 1) Eccentric fineblanking die-cutter Schaal SEP25, year of manufacture: 1981, pressing force: 25t, stroke: 8mm-60mm, upright width: 460mm, lateral upright clearance: 145mm, installation height: 270mm, table dimensions X/Y: 450mm/480mm, table height: 960mm, ram surface X/Y: 280mm/250mm. Including feed roller. 2) Coil decoiler GSW LHM300/1000, year of construction: 1998, load capacity: 300kg. 3) Coil reel, load capacity: 300kg. 4) Coil straightening station Dreher 1633/BV, year of manufacture: 1982, documentation available. On-site inspection is possible.

Double-Column High-Speed Press

Schuler A2-80

Germany

unknown

used

on request

INNO28010

Pressing force: 80t, ram stroke: 25mm, stroke: 100mm-500mm. Including strap infeed unit and Beutler collabroll/straightening station. Documentation available. On-site inspection is possible. The machine has an eccentric design.

CNC Tool Grinding Machine

Smp Numaffut CA6

Germany

2001

used

on request

INNO28009

A CNC 5-axis grinding machine SMP is available. Grinding wheel diameter: 200mm, max. tool diameter: 150mm, max. tool length manual/automatic: 300mm/140mm, max. workpiece weight: 25kg, spindle speed: 20000rpm, spindle power: 7kW, interchangeable magazine: 4 places. Documentation available. On-site inspection is possible.

Pick-And-Place Machine

Mechatronika M10V

Germany

2013

used

on request

INNO28008

A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible.

UV Dryer

Esc special

Germany

2005

used

on request

INNO28007

Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Engel

Germany

2009

used

on request

INNO28006

There are 5 identical Engel injection molding machines available. Screw diameter: 2x 30mm/3x 35mm, clamping force: 80t, weight: approx. 4400kg. All machines including attachment crane. One Engel (Fig. 5) serves as a spare parts dispenser for the remaining 4 machines. Documentation available. On-site inspection is possible.

Slitting and Winding System

Calator/weiss/bastian SEM-SRE

Germany

1988

used

on request

INNO28005

A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible.

CNC Machining Center

Hurco VMX 50

Germany

2006

used

on request

INNO28004

Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible.

Robot Cell

Stäubli TX200

Germany

2009

used

on request

INNO28003

A Stäubli robot cell with controller and all components is available. Axes: 6, robot type: articulated arm robot, max. reach: 2594mm, max. payload: 130kg, repeat accuracy at the tool center point (TCP): +/-0.06mm, robot weight: approx. 1000kg. Including CS8CHP controller, teach pendant and control cabinet. Documentation available. On-site inspection is possible.

Upright Drilling Machine

Webo GRADUA 60

Germany

1973

used

on request

INNO28002

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

Gas Turbine

Opra OP16-3B

Germany

2012

used

on request

INNO28001

A complete system consisting of generator, turbine, gearbox, housing, exhaust gas duct and stack is available. 1) Gas turbine: Nominal output at ISO conditions: 1850kWe, fuel: natural gas, calorific value (LHV): 38.8MJ/kg, mass flow rate: 8.7kg/s, max. exhaust gas temperature: 571°C, max. exhaust gas flow: 221kg/s, turbine speed: 26000rpm, operating hours: approx. 20000h. 2) Generator: Type: Synchronous generator LSA 53 VL80/4p, rated power: 2316kVA/10.5kV, 127A, speed: 1500rpm. 3) Gearbox: Type: 2-stage planetary system GB24-1500, transmission ratio: 6.7:1, weight: approx. 350kg. Total system operating hours: 81269h. Documentation available. On-site inspection is possible.

Continuous Baking Oven

Silex DB SF-410/1150

Germany

2010

used

on request

INNO28000

A Silex continuous baking and deep-frying oven is available. Production capacity: approx. 1000 portions/h, processes: frying/baking, output: 20kW, machine dimensions X/Y/Z: approx. 4100mm/1200mm/1700mm, weight: approx. 900kg. Documentation available. On-site inspection is possible.

CNC Machining Center

Stama MC 726 MT

Germany

2006

used

on request

INNO27999

A CNC 5-axis vertical machining center Stama is available. Travel X/Y/Z: 800mm/400mm/350mm, speed: 12,000 rpm, spindle power: 30kW, spindle holder: HSK-63, tool positions: 42, max. workpiece weight: 180kg. Machine dimensions X/Y/Z: approx. 3900mm/3500mm/3300mm, weight: approx. 6600kg, control: Siemens 840D, operating hours: 33,813h. Including measuring probe, bar loader, cooling and filter system. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Arburg 270 S 250-170

Germany

2009

used

on request

INNO27998

There are 2x identical Arburg injection molding machines available. Control: 2-servo-controlled, temperature release: 450°C, clamping force: 250kN, screw diameter: 25mm, injection weight: 54g, shot weight: 69g, injection pressure: 2000bar, heating power: 12.6kW, platen dimensions X/Y: 400mm/400mm, tie bar distance: 550mm, opening stroke: 350mm. Machine dimensions X/Y/Z: approx. 3300mm/1400mm/1750mm, weight: approx. 2300kg, operating hours 1/2: 92197h/94374h. Documentation available. On-site inspection is possible.

Continuous Cleaning Machine

Franke DRB-300/100/5000 III-RST

Germany

2006

used

on request

INNO27997

A continuous spray cleaning system F/R/A/N/K/E is available. Cleaning tank volume: 800l, rinsing tank volume: 400l, recommended temperature cleaning/rinsing: 60°C/65°C, heating capacity cleaning/rinsing/drying: 27kW/12kW/9kW, max. temperature cleaning/rinsing/drying: 80°C/80°C/120°C, filter fineness cleaning/rinsing: 1mm/1mm, connected load: 56kW. Including an oil separator plate phase separator (PPT). Documentation available. On-site inspection is possible.