Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [841 - 860 of 2480]

CNC Milling Machine

Mazak FH 880

Germany

1997

used

on request

INNO27195

Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible.

Wide-Field 3D Measuring System

Keyence VR-3200

Germany

unknown

used

on request

INNO27193

Magnification and measuring range (with 15-inch monitor): Macro mode Horizontal/Vertical: 12x: 24mm/18mm, 25x: 12mm/9mm, 38x: 8mm/6mm, 50x: 4.5mm/3.4mm. Micro mode horizontal/vertical: 40x: 7.6mm/5.7mm, 80x: 3.8mm/2.9mm, 120x: 2.5mm/1.9mm, 160x: 1.9mm/1.4mm. Zoom: 1x-4x, measurable height wide field mode/high magnification mode: 10mm/1mm, display resolution: 0.1µm. Repeat accuracy height/width measurement: 1µm/0.5µm, Measuring accuracy height/width measurement: 2µm/5µm. Stroke X/Y/Z: 184mm/88mm/90mm, rotation: +/-180°, inclination: +/-30°, working distance: 75mm. Documentation available.

CNC Coordinate Measuring Machine

Keyence VL

Germany

unknown

used

on request

INNO27192

Optical transmitter system: Offset transmission type projector module, Optical receiver system: Offset dual optical module with low/high magnification, Illumination system: LEDs in 3 colors (RGB), Display light source: Blue LED. Repeat accuracy: +/-0.1μm, Measuring accuracy: +/-10μm, Measuring mode standard/fine: 4/16 million measuring points. Measuring range: low magnification diameter/height: 300mm/200mm, high magnification diameter/height: 70mm/50mm. Rotation range: 360°, stage movement X/Y: 280mm, inclination: 45°, max. weight of measuring piece: 20kg. Dimensions X/Y/Z: approx. 800mm/1000mm/900mm, weight: approx. 60kg. Documentation available.

Robot

Abb IRB140/IRB640 M2000

Germany

2007

used

on request

INNO27191

Three ABB robots including control unit are available. 1) Type: IRB140 M2000, version: IRB640, payload: 6kg, working range: approx. 810mm, axes: 6, year of manufacture: 2002, control unit: S4C+, interface: Profibus, weight: approx. 100kg. 2/3) 2x - Version: Drive System 3A3B, payload: 6kg, working range: approx. 810mm, axes: 6, year of manufacture: 2007, interface: Profibus, weight: approx. 100kg, controller: IRC5 with Multimove. Robot without connection cable (cut off during disassembly) and one robot is missing the wrist. Documentation available. On-site inspection is possible.

Robot

Abb IRB640 M2000

Germany

2001

used

on request

INNO27190

Two identical ABB robots are available. Number of axes: 4, payload: 150kg, weight: approx. 2000kg, working range: 2905mm, repeat accuracy: +/-0.4mm, max. speed: 2-3m/s. Including two control units. Documentation available. On-site inspection is possible.

Handling System

Abb IRB6400 M2000 / 3.0-100

Germany

2001

used

on request

INNO27189

Two identical ABB handling robots including control units are available. Version: IRB 6400R/3.0-100, payload: 150kg, number of axes: 6, interface: Profibus, control unit: S4C+, max. reach: 2800mm, operating temperature: +5°C/+50°C, storage temperature: -25°C/+55°C, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Robot

Abb IRB6400 M2000 / 3.0-100

Germany

2015

used

on request

INNO27188

Version: IRB 6400R/3.0-100, Load capacity: 150kg, Number of axes: 6, Interface: Profibus, Control system: S4C+, Maximum reach: 2800mm, Operating temperature: +5°C/+50°C, Storage temperature: -25°C/+55°C, Weight: approx. 2000kg, Operating hours: 20000h. Without control unit. Documentation available. On-site inspection is possible. The robot was overhauled by ABB itself in 2015 and has not been in use since then. It previously had 20000 operating hours.

Cabinet Clamp

Comil COSMO NK2

Germany

1992

used

on request

INNO27187

Working height: 300mm-1300mm, working length: 300mm-2500mm, working depth: 140mm-700mm, working table height: 500mm, max. pressure force: 12kN. Control defective. Documentation available.

Row Drilling Machine

Elu S156

Germany

1976

used

on request

INNO14814

Number of drilling heads: 4.

Injection Moulding Machine

Arburg 221/55-250

Germany

1979

used

on request

INNO27186

Clamping force: 25kN, injection force: 5.7kN, screw motor: 12Nm, heating: 3.4kW.

Telescopic Boom Lift

Genie S-85

Germany

2014

used

on request

INNO27184

Max. working height: 25.91m, max. platform height: 25.91m, max. horizontal reach: 23.32m, ground reach: 2.64m, platform capacity on/unrestricted: 300kg/454kg, platform capacity: 2 persons, max. lateral force: 400N, max. inclination: 2.5°/4.5°, max. wind speed: 12.5m/s, gradeability: 45%, rated power: 74hp. Dimensions X/Y/Z: approx. 2.5m/12.4m/2.8m, weight: approx. 17000kg.

Band Saw

Amada HA-250W

Germany

2000

used

on request

INNO27183

Cutting capacity: round material diameter: 10mm-250mm, rectangular material X/Y: 10x10mm-300x250mm, saw blade dimensions X/Y/Z: 27mm/0.9mm/3505mm, saw blade speed: 90m/min, stroke: 400mm, tank capacity: hydraulics: 30l, cooling lubricant: 85l, table height: 700mm, max. workpiece weight: 1500kg. Dimensions X/Y/Z: approx. 2000mm/2400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

CNC Lathe

Monforts RNC 200 A

Germany

2000

used

on request

INNO27182

Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available.

Wire Drawing Plant

Koch KHZ 5000

Germany

1993

used

on request

INNO27180

A wire drawing unit is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 5000, year of manufacture: 1993, number of draws per block: 1, drawing drum diameter: 700mm, drawing force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of construction: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Including hydraulic unit G13 AK. Documentation available.

Coil Cradle

Schmitz/psm

Germany

2007

used

on request

INNO27178

A Schmitz/PSM slitting line for sheet metal processing is available. Coil weight: 5t/6t, strip width: 650mm, strip thickness (stainless steel): 0,4mm-1,5mm, coil inner diameter: 400mm/508mm/610mm, coil outer diameter: 1740mm/2000mm, speed: 100m/min, working direction: right(left) / DX - SX. Components: Decoiler with paper winder, deflection rollers, foil device on both sides, strip guiding, strip cutter, scrap winder, recoiler, coil take-up cross, hydraulic units as well as various tools and sanding belts. On-site inspection is possible.

Twin Screw Extruders

Werner & Pfleiderer ZSK 58

Germany

1991

used

on request

INNO27175

Screw diameter: 58mm, power: 30.6kW, screw speed: 280rpm, conveying capacity: approx. 120kg/h, dimensions X/Y/Z: approx. 2500mm/1500mm/1500mm. Including 2x pairs of screws and a new Brabender FW 80 metering machine.

Twin Screw Extruders

Werner & Pfleiderer ZSK 70

Germany

1990

used

on request

INNO27174

Motor power: 80kW, insertion diameter: 70mm, screw diameter: 70mm, speed: 300rpm, heating zones: 3(7kW/7kW/5kW), dimensions X/Y: approx. 5000mm/900mm, weight: approx. 5700kg. Including 2 pairs of screws, cooling roller mill MPM, year of construction: 2020.

Twin Screw Extruders

Werner & Pfleiderer ZSK 53

Germany

1980

used

on request

INNO27173

Screw diameter: 53mm, screw speed: 345rpm, heating type: electric. Including cooling and 2 pairs of screws.

Tube Furnace

Thermconcept ROHT 50/200/17

Germany

2018

used

on request

INNO27169

A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available.

Tube Furnace

Thermconcept ROK 70/500/11

Germany

2023

used

on request

INNO27168

A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available.