Used machines Germany - Innovac GmbH

Ultrasonic Welding System

Telsonic/ Amtek Gmbh

Germany

2014

used

on request

INNO27967

An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible.

more

Compressed Air Tank

Atlas Copco

Germany

2020

used

on request

INNO27966

Volume: 250l, max. operating pressure: 11bar, outer diameter: 450mm, stand height: 1800mm, medium temperature min./max.: -10°C/120°C. Documentation available. On-site inspection is possible. The machine is unused and as good as new.

more

Ultrasonic Welding System

Telsonic/ Maschinenbau Raab TSP-3000-1P

Germany

2010

used

on request

INNO27965

An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible.

more

Ultrasonic Welding System

Telsonic/ Ansotec ULTRASONIC USP 3000

Germany

2009

used

on request

INNO27963

Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible.

more

Hydraulic Crosshead Die Cutter

Schön & Cie 2071A

Germany

unknown

used

on request

INNO27959

An overhauled punching machine Schön is available for the precise punching of sheets or roll material. Punching force: 250kN, max. punching area X/Y: 2100mm/650mm, cutting head dimensions X/Y: 650mm/650mm, pressure plate rotation speed: 200°/s, clamping beam travel: 800mm, repeat accuracy: +/-1°, punching speed: 200mm/s, hydraulic drive: 11kW, oil volume: 200l. The clamping beams are driven by a digital servo motor with ball screw spindle. The machine has been overhauled and has a Beckhoff industrial PC with Windows 10 and TwinSafe safety logic. Documentation available. An on-site inspection is possible.

more

Textile Dryer

Ernst Reinhardt 11/2/1621

Germany

1965

used

on request

INNO27958

A drying oven Ernst Reinhardt GmbH, which was used in the twisting and tea bag industry for drying yarn bobbins, is available. Internal dimensions X/Y/Z: 1250mm/800mm/1500mm, volume: 1.5m³, heating capacity: 24kW, machine dimensions X/Y/Z: approx. 2200mm/1100mm/2500mm. On-site inspection is possible.

more

Press Brake

Zlatokov Pmp Trenčín LODD 200

Germany

1982

used

on request

INNO27956

Pressing force: 1961kN, working width: 4000mm, table width: 200mm, working height: 800mm, stroke rate: 28/min, clear width: 3450mm, motor power: 22kW, length: 4420mm, width: 2060mm, height: 3800mm, weight: 22.66t. With comprehensive documentation, machine with age-related signs of use and wear, associated dies and matrices in usable but heavily worn condition. On-site inspection possible.

more

Tube Filling System

Gustav Obermeyer TUFÜBA 40 PE

Germany

2006

used

on request

INNO27951

A Gustav Obermeyer tube filling machine including a SpeMaBa labeler is available. Filling capacity: 15-20 tubes/min, hopper volume: 40l, dosing piston diameter: 35mm (10cm³-100cm³), tube format: 30mm/150mm, tube material: HDPE/LLDPE, tube diameter range: 5mm-90mm, tube length range: 65mm-240mm. Printing system: Allen NX 4 (ITW-Diagraph), processed labels: 80mm/77mm, printing: thermal transfer, printing foil: N508SW110 x 600 (Novexx), labeling machine: BBK Rapid SR 160/610-3800 S. Documentation available. On-site inspection is possible.

more

Screw Compressor

Atlas Copco ZR 200

Germany

2000

used

on request

INNO27950

Max. Working pressure: 13bar, volume flow (FAD): 30m³/min, motor power: 200kW, length: 3200mm, width: 2000mm, height: 1650mm, weight: 4t, operating hours: approx. 45,000h. The machine is not functional and needs to be overhauled, the cooling circuit between the compressor stages is leaking in several places. With documentation, an on-site inspection is possible.

more

Hot Stamping Machine

Baier 32/SV

Germany

2014

used

on request

INNO27948

A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible.

more

CNC Keyseating Machine

Balzat 32/300

Germany

1991

used

on request

INNO27947

Groove width range: 2mm-32mm, max. ram stroke: 300mm, stroke rate: 300 strokes/min, max. installation height: 450mm, feed: 0.01mm-0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions X/Y/Z: approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control: fk electronic Dialog CNC. On-site inspection is possible.

more

Labelling Machine

Krones Universella

Germany

1993

used

on request

INNO27946

Stations: 15, labeling capacity: 10000 bottles/h, bottle formats: 0.33l/0.5l/1l/1.5l, labeling technology: cold glue, number of grippers: 6 grippers/cylinder, flat turntable diameter: 600mm. On-site inspection is possible.

more

Bottle Inspection System

Krones Linatronic

Germany

2000

used

on request

INNO27945

A Krones bottle inspection system is available. Bottle formats: 0.33l/0.5l/1l/1.5l, inspection capacity: 10000 bottles/h. Documentation available. On-site inspection is possible.

more

Center Lathe

Weiler Primus-LZ GRF

Germany

1978

used

on request

INNO27944

A barely used Weiler precision lead and feed spindle lathe is available. Turning diameter over bed/slide: 250mm/180mm, turning length: 450mm, spindle clearance: 23mm-24mm, speed: 3000rpm, drive power: 1.5kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 600kg. Including accessories. On-site inspection is possible.

more

Universal Milling Machine

Misal 765/C

Germany

1984

used

on request

INNO27941

Travel X/Y/Z: 1270mm/660mm/530mm, feed X/Y/Z: 1500mm/1500mm/54mm/min, rapid traverse X/Y/Z: 2500mm/2500mm/750mm, spindle power: 9.2kW, speed: 1420rpm, spindle taper: NST 50, table dimensions X/Y: 1700mm/500mm. Documentation available. On-site inspection is possible.

more

Center Lathe

Nardini SAGAZ SZ 250 T

Germany

1990

used

on request

INNO27940

Center width: 1500mm, center height: 250mm, turning diameter over bed/offset/over facing slide: 500mm/710mm/305mm, bed width: 340mm, spindle bore: 80mm, spindle diameter: 95mm, speed: 1500rpm. Stroke of face slide/top support: 300mm/170mm, top support swivel range: +/-45°, tailstock quill: 80mm, quill stroke: 205mm, motor power: 9kW. Machine dimensions X/Y/Z: approx. 3000mm/1400mm/1650mm, weight: approx. 2700kg. Documentation available. On-site inspection is possible.

more

CNC Spark EDM-Machine

Matra-fanuc TAPE-CUT-W1

Germany

unknown

used

on request

INNO27939

Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible.

more

Strapping Machine

Sander M.j. Maillis TZ/4

Germany

2003

used

on request

INNO27937

Belt width: 10/12mm, belt material: PP (polypropylene), connected load: 1kW, length: 1420mm, width: 615mm, height: 1550mm. The machine has already been dismantled, an on-site inspection is possible.

more

Surface Grinding Machine

Ziersch Gmbh ZT 820

Germany

2008

used

on request

INNO27936

Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible.

more

Bottle Filling Line

Sipa/smi/zecchetti SF8-4/Gamma 20

Germany

2016

used

on request

INNO27935

A complete 1l (1000ml) PET bottle filling line, which was used for the food industry, especially in the dairy industry, is available. Components: 1) Blow molding machine SIPA SF 8/4, year of manufacture: 1999, including preform magazine, conveyor belt and 1-liter PET bottle mold set. 2) MAI bottle filling machine for fresh milk, with monobloc PET bottle filler, screw capper, screw cap magazine and conveyor belt. 3) Kube K20 bottle labeling machine, year of manufacture: 2016. 4) Gamma 20 shrinking machine, year of manufacture: 2016. 5) Discharge conveyor for the filled bottles. 6) Air conveyor for empty PET bottles. 7) Air compressor and air preparation for the blowing machine. Production output of the entire system: 3270 bottles/h. Documentation available. On-site inspection is possible.

more