Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [801 - 820 of 2438]

Robot Cell

Stäubli TX200

Germany

2009

used

on request

INNO28003

A Stäubli robot cell with controller and all components is available. Axes: 6, robot type: articulated arm robot, max. reach: 2594mm, max. payload: 130kg, repeat accuracy at the tool center point (TCP): +/-0.06mm, robot weight: approx. 1000kg. Including CS8CHP controller, teach pendant and control cabinet. Documentation available. On-site inspection is possible.

Upright Drilling Machine

Webo GRADUA 60

Germany

1973

used

on request

INNO28002

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

Gas Turbine

Opra OP16-3B

Germany

2012

used

on request

INNO28001

A complete system consisting of generator, turbine, gearbox, housing, exhaust gas duct and stack is available. 1) Gas turbine: Nominal output at ISO conditions: 1850kWe, fuel: natural gas, calorific value (LHV): 38.8MJ/kg, mass flow rate: 8.7kg/s, max. exhaust gas temperature: 571°C, max. exhaust gas flow: 221kg/s, turbine speed: 26000rpm, operating hours: approx. 20000h. 2) Generator: Type: Synchronous generator LSA 53 VL80/4p, rated power: 2316kVA/10.5kV, 127A, speed: 1500rpm. 3) Gearbox: Type: 2-stage planetary system GB24-1500, transmission ratio: 6.7:1, weight: approx. 350kg. Total system operating hours: 81269h. Documentation available. On-site inspection is possible.

Continuous Baking Oven

Silex DB SF-410/1150

Germany

2010

used

on request

INNO28000

A Silex continuous baking and deep-frying oven is available. Production capacity: approx. 1000 portions/h, processes: frying/baking, output: 20kW, machine dimensions X/Y/Z: approx. 4100mm/1200mm/1700mm, weight: approx. 900kg. Documentation available. On-site inspection is possible.

CNC Machining Center

Stama MC 726 MT

Germany

2006

used

on request

INNO27999

A CNC 5-axis vertical machining center Stama is available. Travel X/Y/Z: 800mm/400mm/350mm, speed: 12,000 rpm, spindle power: 30kW, spindle holder: HSK-63, tool positions: 42, max. workpiece weight: 180kg. Machine dimensions X/Y/Z: approx. 3900mm/3500mm/3300mm, weight: approx. 6600kg, control: Siemens 840D, operating hours: 33,813h. Including measuring probe, bar loader, cooling and filter system. Documentation available. On-site inspection is possible.

Mobile Crane

Demag LK 910/483-V

Germany

1972

used

on request

INNO27996

Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible.

Electric Pedestrian Forklift Truck

Genkinger EGG 20/31 I

Germany

2019

used

on request

INNO27994

Load dimensions: 1200x800mm, max. load capacity: 2t, fork lift: 46-3120mm, fork tine dimensions: 1000x100x40mm, travel speed: 5km/h, motor power: 2kW, length: 2930mm, width: 940mm, operational hours counter: 41h. With documentation, no defects known, an on-site inspection is possible.

Remaining Stock Assembly Line

Rna/sortimat/asba/intec/maximator/tox/videojet/bihler Model 1510/DUO-5-PN-K/BB50/ET180

Germany

unknown

used

on request

INNO27993

After the closure of an assembly line, various accessories, spare parts and individual small used machines are available. 30+ drives for RNA, Sortimat, ASBA, OKU and Lanco reversible conveyors. 6x Intec BB50 belt hoppers. 4x hydraulic units Maximator and Hawe. 4x Schling Duo-5-PN-K toggle presses. 5x TOX EL 15.30 power packs. 8x linear conveyors with swing arm and left-hand grid. 4x Bihler ET 130.0.G-1000/4 welding transformers. 6x VideoJet Model 1510 inkjet printers. Documentation available. On-site inspection is possible.

Chiller

Klimat/hiref RFS 18/LCE124FL

Germany

2010

used

on request

INNO27991

Two chillers are available. 1) Klimat S.p.A. RF/S 18, year of manufacture: 1997, compressor: H2NG094, coolant: R22, coolant quantity: 6.5kg, oil: Zerol 150T, oil quantity: 2.55kg, max. water pressure: 3bar, cooling capacity: 20kW, machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 400kg. 2) HiRef LCE124FL, year of manufacture: 2010, max. operating pressure: 40.5bar, ambient temperature min./max.: -10°C/45°C, coolant: R410A, cooling capacity: 45kW, machine weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Dosing System

Velcorin II G B5 MID 50 C/VDT 50 L

Germany

2007

used

on request

INNO27990

Two Velcorin cold sterilization systems for the bevarage industry are available. 1) Velcorin II G B5 MID 50 C, year of manufacture: 2007, min./max. flow rate: 7000l/23000l/h, recommended min. beverage quantity for high dosing accuracy: 85l/h, max. directional flow rate: 504hl/h, dosing pump type: MTV 2.13/17, dosing accuracy: 20ml Velcorin/hl, sterilizing agent: dimethyl dicarbonate (DMDC, E242). Max. Beverage line pressure: 6.5bar, max. beverage line temperature: 150°C, max. power consumption: 2000VA, operating pressure: 4bar-8bar. 2) A defective Velcorin VDT 50 L. The screen and the vent screw are defective on this machine and cannot be repaired. The machine is available as a defective spare parts carrier. Both machines have touch panels. Documentation available. On-site inspection is possible.

Pallet Wrapping Machine

Geho Basicstretch 1500

Germany

2013

used

on request

INNO27988

Film carriage: 2x manual via belt, column height: 2260mm, max. loading height including pallet: 2300mm, turntable diameter: 1500mm, turntable load capacity: 1500kg, turntable speed: 13.5rpm, turntable height: 76mm. Machine dimensions X/Y: 2600mm/1500mm, weight: approx. 330kg. Documentation available. On-site inspection is possible.

Cross Belt Grinding Machine

Linden Machines B.v. MC/QB-900

Germany

1990

used

on request

INNO27986

Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible.

Bulldozer

Liebherr PR 722 BL

Germany

1995

used

on request

INNO27985

A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.

Diesel Fork Lift

Linde H50D/H70D

Germany

2017

used

on request

INNO27984

There are 4 high-quality forklift trucks with diesel drive from the Linde HxxD series available. 1) Linde H50D, year of manufacture: 2015, operating hours: 17,213h, rated load capacity: 5000kg, rated working power: 85kW, weight: approx. 10,000kg. Minor technical defects and without attachment. 2) Linde H50D, year of construction: 2016, operating hours: 13,499h, rated load capacity: 5000kg, rated working power: 85kW, weight: approx. 10,000kg. Minor technical defects and without attachment. 3) Linde H50D-03, year of construction: 2020, operating hours: 10,616h, rated load capacity: 5000kg, rated working power: 85kW, weight: approx. 10,000kg. Without attachment. 4) Linde H70D, year of construction: 2017, operating hours: 8,365h, rated load capacity: 7000kg, weight: approx. 12,000kg. Without attachment. Documentation available. On-site inspection is possible. Individual sale possible.

NC Powder Coating Plant

Wma Warsteiner Montage Und Anlagentechnik

Germany

2003

used

on request

INNO27978

Three-chamber pre-treatment dimensions: 3600x1200x1900mm, washing entrance dimensions: 700x1500mm, manual painting booth dimensions: 800x1700mm, cycle time: 6min. With residual moisture dryer, Gema Optiflex 2 powder device, Power & Free circulating material conveyor, Weishaupt WG 20-C (100kW) and WG 30-C (239kW) gas burner. On-site inspection is possible. Available in February 2025.

CNC Universal Milling Machine

Deckel FP4-60

Germany

1999

used

on request

INNO27977

Travel X/Y/Z: 600mm/500mm/450mm, speed: 5000rpm, table dimensions X/Y: 900mm/520mm, quill stroke: 80mm, tool holder: SK40, tool positions: 20, power: 7.5kW, number of axes: 4, machine weight: approx. 4100kg, control: Dialog 12, documentation available. On-site inspection is possible.

CNC Profile Machining Center

Tekna TK 426/3

Germany

1998

used

on request

INNO27975

Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible.

Press

Gechter/burger SEM 70kN/DO 3

Germany

1990

used

on request

INNO27970

Two presses from different manufacturers are available. 1) Gechter SEM 70 KN, year of manufacture: 1990, pressing force: 70kN, type: knuckle-joint press, stroke: 5mm-62mm, max. installation height: 295mm, throat depth: 160mm, weight: approx. 350kg. 2) Two-stroke press Burger DO 3, pressing force: 3t, stroke rate: 80/min, throat: 140mm, stroke: 40mm, table dimensions X/Y: 280mm/380mm, working height: 810mm, ram surface: 115mm/100mm, machine dimensions X/Y/Z: approx. 800mm/1000mm/1400mm, weight: approx. 250kg. On-site inspection is possible.

Diameter Measuring and Controlling Machine

Zumbach ODAC 63 Trie-JN-F + USYS 20

Germany

2016

used

on request

INNO27969

Measuring range X/Y/Z: 64mm/64mm/64mm, min. object diameter: 0.25mm, scanning rate: 3x1500 scans/s, laser beam width resolution: 0.02mm, repeat accuracy: +/-0.00001mm, data output rate: 333 data packets/s. USYS 20 process and display unit: Inputs: 4, Outputs: 5, Interfaces: RS-232, Ethernet TCP/IP, Acquisition and storage of measurement data: USYS Data. Documentation available. On-site inspection is possible.

Inkjet Printer

Kba alphaJET EVO/alphaJET mondo/alphaJET C

Germany

2014

used

on request

INNO27968

There are 3 KBA inkjet printers available. 1) KBA alphaJet EVO, year of manufacture: 2011, print height range: 0.8mm-15mm, max. print speed: 460m/min, max. print resolution: 48p, max. number of lines: 8. 2) KBA alphaJET mondo, year of manufacture: 2014, max. line speed: 780m/min, max. number of lines: 5, nozzle diameter: 62µm, machine dimensions X/Y/Z: approx. 455mm/350mm/290mm, weight: approx. 20kg. 3) KBA alphaJET C (double head). Documentation available. On-site inspection is possible.