Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [701 - 720 of 2480]

Cleaning System

Noyen Smart 900 MPS

Germany

2018

used

on request

INNO27410

A chamber washing system is available. Cleaning chamber dimensions X/Y/Z: 700mm/800mm/800mm, washing medium: water, medium temperature: 55°C-65°C, max. payload: 200kg, wash tank: 900l, rinse tank: 900l, oil separator: approx. 200l, tank material: steel 1. 4301(304L), basket dimensions X/Y/Z: 1200mm/800mm/600mm, spray pressure: 3bar-5bar, dimensions X/Y/Z: approx. 5200mm/2400mm/3000mm, weight: approx. 2300kg, control: Siemens PLC, operating hours: 25342h. Documentation available.

Atmospheric Plasma Processor

Diener PlasmaBeam Standard

Germany

2020

used

on request

INNO27408

Treatment width: 8mm-12mm, max. plasma generator diameter: 32mm, plasma generator length: 210mm, cable length: 3m, inlet pressure: 5bar-8bar, gas consumption: approx. 2m³/h, generator power: 300W, frequency: approx. 40kHz, dimensions X/Y/Z: approx. 420mm/140mm/500mm, control: manual/semi-automatic, operating hours: 81h. Documentation available. On-site inspection is possible.

Frequency Converter

Vectron-elektronik VC 400-060

Germany

unknown

used

on request

INNO27407

Input voltage (+/-15%): 3 x 400V, output voltage (+/-15%): 3 x 0V-400V, input frequency: 50Hz-60Hz, power: 0kW-200kW, output frequency: 0Hz-200Hz, rated current: 72A. Overload capacity: 1.2: 60A, 42kVA, 30kW, 1.5: 45A, 31kVA, 22kW. Voltage: 265V, frequency: 195Hz, initial voltage: 13.6V, initial frequency: 0Hz. Dimensions X/Y/Z: approx. 2100mm/800mm/500mm. Documentation available. On-site inspection is possible.

Distilling Unit

Fidi RS250AX

Germany

1996

used

on request

INNO27406

A distillation machine for the separation of colors and solvents is available. Filling capacity: 25l, solvent distillation time: approx. 4h-5h, rinse water distillation time: approx. 13h, cooling time: 3h-7h, operating temperature: 50°C-200°C, power: 2kW, oil type: Essotherm 500, oil capacity: 12l, cooling type: air cooling. Dimensions X/Y/Z: approx. 600mm/1000mm/1200mm, weight: approx. 130kg. Documentation available. On-site inspection is possible.

Cooking Installation

Fessmann Autovent 3000 (5 Wagen)

Germany

2021

used

on request

INNO27403

Cabinet height: 2730mm, room height: 3700mm, smoke trolley dimensions X/Y/Z: 1980mm/1040mm/1020mm, max. spit length: 1000mm, connected load with LP heating: 242.5kW, floor space X/Y: 1510mm/5760mm, min. exhaust air outlet height: 3700mm, floor recess depth: 50mm, steam consumption: 316kg/h, compressed air consumption: 20l/h, water consumption: 780l/h, weight: approx. 2200kg. Documentation available. On-site inspection is possible. In original packaging.

Lift Truck

Pfaff/jungheinrich/bulli

Germany

2021

used

on request

INNO27402

There are 15 Bulli/Pfaff/Jungheinrich hand pallet trucks available. 1) FK Bulli, year of manufacture: 2007. 2) Pfaff, year of manufacture: 2011. 3) Pfaff, year of manufacture: 2011. 4) Jungheinrich PTM 2.0, year of manufacture: 2021. 5) Jungheinrich PTM 0.5, year of manufacture: 2021. 6) Jungheinrich PTM 2.0, year of manufacture: 2021. 7) FK Bulli. 8) Pfaff, year of manufacture: 2011. 9) Jungheinrich PTM 0.5, year of manufacture: 2021. 10) Jungheinrich PTM 0.5, year of manufacture: 2021. 11) Pfaff, year of manufacture: 2011. 12) FK Bulli, year of manufacture: 2007. 13) Jungheinrich PTM 0.5, year of manufacture: 2021. 14) Jungheinrich PTM 2.0, year of manufacture: 2021. 15) Jungheinrich PTM 0.5, year of manufacture: 2021.

Cutting Machine

Polar Mohr 115 EMC-MON

Germany

1990

used

on request

INNO27401

Working width: 1150mm, insert height: 165mm, front table length: 800mm, rear fence: approx. 1500mm.

High-Speed Guillotine

Wohlenberg 115

Germany

2010

used

on request

INNO27400

Cutting width: 1150mm, max. cutting length: 1150mm, max. cutting height: 165mm, cutting speed: 45 strokes/min, table dimensions X/Y: 1650mm/1460mm, total power: 7.5kW. Dimensions X/Y/Z: approx. 2700mm/2500mm/1600mm, weight: approx. 3000kg. On-site inspection is possible.

CNC Glass Machining Center

Cms Tecnometal B7

Germany

2008

used

on request

INNO27398

Glass dimensions X/Y min./max.: 80mm x 150mm/2700mm x 6580mm, dimensions X/Y/Z: approx. 5800mm/7300mm/3200mm. Documentation available.

Chain Conveyor

Vecoplan VKU-800/VKU-1100

Germany

2023

used

on request

INNO27397

Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible.

Cheese Slicer

Schiwa SCV 617

Germany

1997

used

on request

INNO27395

Cutting capacity max.: 300/min. On-site inspection is possible.

Stand-Up Pouching Machine

Laudenberg FBM 22 235 Duplex

Germany

2000

used

on request

INNO27394

Bag width min./max.: 2x 120mm/190mm, bag height min./max.: 100mm/350mm, max. packaging capacity: 200/min, bag material: sealable film laminate, electrical power: approx. 150-20kVA, bag types: Flat bottom bag/stand-up pouch, lift consumption: approx. 600Nl/min, dimensions X/Y/Z: approx. 6700mm/2600mm/2400mm. Documentation available. An on-site inspection is possible.

Deburring Press

Disa Serf HP-60

Germany

2005

used

on request

INNO27377

A Disa Serf hydraulic deburring press is available. Pressing force: 60 tons. An on-site inspection is possible.

Punch Deburring Press

Janke HP-160

Germany

2008

used

on request

INNO27376

Press force: 160t, rapid traverse: 100mm-300mm/s, working speed: 95mm/s, press speed: 16mm/s, stroke: 800mm, low cylinder stroke: 500mm, installation height: 1700mm, table dimensions X/Y: 1100mm/650mm, press ram dimensions X/Y: 1100mm/600mm, dimensions X/Y/Z: approx. 3700mm/2100mm/5800mm, weight: approx. 13000kg. Documentation available. On-site inspection is possible.

Eddy Current Testing System

Janke/ibg Eddyvisor

Germany

2016

used

on request

INNO27375

An IGB eddy current testing system with Jahnke laser marking and roller conveyors is available. Roller conveyor width: approx. 350mm, total weight: approx. 3000kg. Including feeding station, control cabinets, process control and Z-plate discharge conveyor. Dimensions X/Y/Z: approx. 2300mm/1500mm/2000mm, weight: approx. 300kg. Documentation available. On-site inspection is possible.

Punch Press

Janke/fanuc HP-160/S-430i W

Germany

1999

used

on request

INNO27374

A hydraulic punching press from Janke is available together with an articulated handling robot from Fanuc. Press: Press force: 160t, rapid traverse: 100mm-300mm/s, working speed: 95mm/s, stroke: 800mm, hold-down cylinder stroke: 500mm, installation height: 1700mm, ram dimensions X/Y: 1000mm/600mm, table dimensions X/Y: 1150mm/650mm, weight: approx. 13000kg. Articulated arm robot: number of axes: 6, reach: approx. 2600mm, payload: 165kg, repeat accuracy: +/-0.3mm, weight: approx. 1400kg, control: Siemens R-J3. The feedback cover on axis 1 of the robot is broken. Documentation available. On-site inspection is possible.

Troughed Belt Blasting Machine

Brück BR 60

Germany

1981

used

on request

INNO27373

Capacity per oven: 7000kg-8000kg/h, drum diameter: 1200mm, drum length: 1250mm, max. filling volume: 0.6m³, filling weight: 1500kg, max. piece weight: 200kg, air speed: 18m-20m/s, required extraction capacity: 6000m³/h, weight: approx. 15000kg. Including bucket elevator (1500kg), coater (3000kg), dedusting system, conveyor sieve FS 700/800x3200 and various spare parts as good as new. The unit was overhauled in 1998. Documentation available.

Guillotine Shear

Amada GPS 840

Germany

1992

used

on request

INNO27369

Cutting length: 4000mm, max. steel thickness: 8mm, max. stainless steel thickness: 6mm, max. aluminum thickness: 10mm, stroke: 190mm, motor power: 15kW, dimensions X/Y/Z: approx. 4600mm/2200mm/2200mm, control: Amada Promecam. An on-site inspection is possible.

Press Brake

Durmazlar HAP 30160

Germany

2007

used

on request

INNO27368

Working width: 3050mm, press force: 160t, stroke: 175, bending speed: 9mm/s, return speed: 86mm/s, throat depth: 350mm, oil volume: 150l, weight upper/lower tool: 40kg/55kg. Dimensions X/Y/Z: approx. 2200mm/4300mm/2800mm, weight: approx. 9300kg, control: Durma AD 88 (NC). Each restart of the machine causes a deletion of all settings. Without edging knives and dies. Documentation available. Available from September 2024.

Flat Bed Die Cutter

Marumatsu SAPV-1612

Germany

1993

used

on request

INNO27367

Material thickness range: 1mm-8mm, min. sheet dimensions X/Y: 600mm/400mm, max. sheet dimensions X/Y/Z: 1600mm/1200mm, max. die-cut: 1580mm/1180mm, max. die-cut plate dimensions X/Y: 1740mm/1230mm, min. die-cut plate dimensions X/Y: 620mm/530mm, max. die-cut pressure: approx. 300t. Die-cutting plate dimensions X/Y: 1740mm/1230mm, min. die-cutting plate dimensions X/Y: 620mm/530mm, max. die-cutting pressure: approx. 300t, stroke: 70mm, max. die-cutting speed: 50 sheets/min, weight: approx. 34000kg. Coupling, see-through panel and smaller capping parts were installed in 2024. Documentation available. On-site inspection is possible.