Used machines Germany - Innovac GmbH

Folding Press Machine

Helmut Lotze PZ 160

Germany

1971

used

on request

INNO27723

Working width: 3500mm, max. sheet thickness: 4mm, machine dimensions X/Y/Z: approx. 3800mm/1500mm/1900mm, weight: approx. 9000kg. The machine has a leak on the right cylinder. Documentation available. On-site inspection is possible.

more

Distillation System

Stilmas FA 1000 HR/SA

Germany

2002

used

on request

INNO27722

A Stilmas distillation plant for the production of water for injection (WFI) is available. Production capacity 25°C/85°C: 500l/h / 1000l/h, max. temperature: 144°C. Documentation available. On-site inspection is possible.

more

Pure Steam Generator

Stilmas PSG 1500 DTS

Germany

2002

used

on request

INNO27721

Operating pressure double jacket/tubes: 10bar/6bar, material: stainless steel, operating temperature: 180°C, output: approx. 350kg/h, machine dimensions X/Y/Z: approx. 2100mm/1000mm/3700mm, weight: approx.1500kg. Documentation available. On-site inspection is possible.

more

CNC Machining Center

Shw UFZ 6L

Germany

1990

used

on request

INNO27719

A CNC universal milling and drilling center SHW is available. Travel X/Y/Z: 6000mm/2100mm/1500mm, milling head swivel: 180°, rapid traverse X/Y/Z: 8m/min, speed: 4500rpm, spindle power: 31.5kW, machine dimensions X/Y/Z: approx. 11000mm/9000mm/6000mm, weight: approx. 44000kg. Documentation available. On-site inspection is possible.

more

Cycle Lathe

Boehringer VDF DUS 800

Germany

1994

used

on request

INNO27718

A Boehringer VDF DUS 800 flat-bed cycle lathe is available. Center width: 1000mm, center height: 900mm, orbital diameter over face slide: 515mm, speed: 1600rpm, spindle bore: 128mm, max. workpiece weight: 6000kg, machine dimensions X/Y/Z: approx. 5000mm/2000mm/2000mm, weight: approx. 9000kg. Documentation available. On-site inspection is possible.

more

Diesel Three-Phase-Current Aggregate

Volvo/stamford/steyr TAD1631GE/HCI544F1/17S230

Germany

2024

used

on request

INNO27715

A mobile diesel three-phase generator set with a Volvo engine and Stamford generator mounted on a Steyr truck is available. 1) Steyr 17S230 truck, payload: 17t, engine power: 230kW, platform length: approx. 9m, engine-gearbox and rear axle: MAN make, including additional tank with a volume of 2000l, mileage: approx. 400,000km. 2) Generator diesel engine Volvo TAD1631GE, power: 485kW, speed: 1500rpm, including exhaust gas turbocharger, intercooler, front radiator, starter, alternator, speed governor, connection housing, intake air filter with fine filter and intake air heating for colder outside temperatures. 3) Stamford HCI544F1 generator, type output (oversized): 670kVA, continuous output: 560kVA. The engine is integrated in the base frame with the fuel tank of the truck (400 l) and the auxiliary tank (2000 l). This makes it possible to produce 10000kWh of electricity at a time. Condition: genset engine: used in mint condition with renewed nozzles, generator (oversized): brand new, generator circuit breaker: brand new, batteries: brand new, switchgear with Woodword electronics: brand new, truck: 400,000 km with specialist workshop inspection. Documentation available. On-site inspection is possible.

more

Hydraulic Press

Wmw PYE 250 S1

Germany

unknown

used

on request

INNO27713

Pressing force: 250t, operating pressure: 250bar, speed up/down: 200mm/110mm/s, ram stroke: 500mm, throat depth: 360mm, table ram distance: 800mm, power: 20.5kW, weight: approx. 8000kg. On-site inspection is possible.

more

Slitting and Winding Machine

Euromac TB-3.06iS

Germany

2013

used

on request

INNO27712

Working width: 1200mm, max. nut roll diameter: 1000mm, max. end roll diameter: 600mm, max. roll weight: 1500kg, min. roll width: 300mm, web tension: 50N-400N/axis, core inner diameter unwind/rewind: 152mm/76mm, speed: 500m/min, max. cuts: 32, products: painted aluminum: 25µm-70µm, aluminum laminates: 40g-150g/m², embossed aluminum: 105µm-160µm, underbridge space: 2000mm. Machine dimensions X/Y/Z: approx. 5731mm/5710mm/2652mm, control: Siemens PLC 7, operating hours: 5736h. Including spare lower knife shaft, sets of spacer rings, circular knives on sleeves including spare circular knives, hard-coated aluminum deflection rollers, rubberized smooth contact rollers, an optical positioning aid with spotlights, a handling trolley, a manually movable unloading frame, a mending table on the unwinder as well as area protection by floor scanner and a hood. Documentation available. On-site inspection is possible.

more

Steam Plant

Reining

Germany

2000

used

on request

INNO27710

A Reining waste gas heat recovery system is available. It receives the exhaust gases from the plant and currently generates approx. 25 t/h of steam from the heat of a hot rolling mill. The chimney and the heat exchangers were manufactured by Babcock-BSH around 1983. An on-site inspection is possible. Expected to be available at the end of 2025 or beginning of 2026.

more

Deburring Machine

Plakoma

Germany

2000

used

on request

INNO27709

A Plakoma brushing and deburring machine is available. The machine was used to remove flame burrs and to clean the surfaces of metal products. It has a stop system and positioning. Including a gantry crane with a load capacity of 16 tons. Individual components of the machine were overhauled in 2008. Documentation available. On-site inspection is possible. Expected to be available at the end of 2025 or beginning of 2026.

more

Placement System

Neoden S1

Germany

2019

used

on request

INNO27708

Heads: 4, Feeder slots: 58, Positioning accuracy: +/-0.01mm, Production output: 6000CPH, Camera field of view X/Y at 20µm resolution: 48mm/40mm, Machine dimensions X/Y/Z: approx. 1000mm/760mm/600mm, Weight: approx. 100kg. Documentation available. On-site inspection is possible.

more

Eccentric Press

Edelhoff DARR 1/80

Germany

1995

used

on request

INNO27707

A Gebrüder Edelhoff punching machine is available. Pressing force: 80t, stroke adjustment: 20mm-80mm, ram adjustment: 100mm, stroke rate: 30-200/min, motor power: 15kW, weight: approx. 9500kg. Including reel AMT CA 300/R7-60. The machine occasionally has a problem with the speed, as it increases by itself. This is probably due to the wiring harness. An on-site inspection is possible.

more

Bed Type Milling Machine

Dpm

Germany

unknown

used

on request

INNO27706

An NC bed milling machine DPM (Digital Precision Machine) with defective control is available. Travel X/Y/Z: approx. 800mm/430mm/600mm, table dimensions X/Y: 1270mm/255mm, spindle mount: R8/CAT40, speed: 5000rpm, spindle power: 2.2kW, max. table load: 340kg, rapid traverse: 2.54m/min. Dimensions X/Y/Z: approx. 2000mm/2600mm/2300mm, weight: approx. 2500kg. On-site inspection is possible.

more

Gantry Crane

Vetter PA10-3,0H

Germany

2002

used

on request

INNO27703

A mobile Vetter gantry crane is available. Load capacity: 1000kg, clear width: 2100mm, height: 3000mm. Documentation available. On-site inspection is possible.

more

Transformer

Leppert-dominit SDO 800/20

Germany

1975

used

on request

INNO27701

Rated power: 800kVA, operating mode: continuous operation, primary voltage: 20800V, secondary voltage: 20000V/480V, switching group: Dyn5, short-circuit voltage: 3.9%, short-circuit current: 2kA, cooling: ONAN, insulating weight (oil): approx. 490kg, primary current: 23.1A, secondary current: 1155A, machine dimensions X/Y/Z: approx. 1850mm/1000mm/2150mm, weight: approx. 2250kg. Documentation available.

more

Tool Grinding Machine

Trumpf QuickSharp

Germany

2007

used

on request

INNO27699

Workpiece clamping diameter: 150mm, max. workpiece height: 130mm, grinding wheel diameter: 125mm, max. grinding speed: 20m/s, grinding motor power: 1.1kW, grinding motor speed: 2800rpm, machine dimensions X/Y/Z: approx. 770mm/770mm/1550mm, weight: approx. 550kg. Documentation available. On-site inspection is possible.

more

Mixer

Linden K III 5

Germany

1993

used

on request

INNO27697

A Linden twin-screw mixer is available. Total volume: 225l, usable volume: 150l, machine dimensions X/Y/Z: approx. 1650mm/1300mm/1380mm. Documentation available. On-site inspection is possible.

more

Pharmaceutical Roller Compactor

Alexanderwerk WP120

Germany

unknown

used

on request

INNO27696

Throughput: 50kg/h, material: stainless steel, roll diameter: 120mm, roll width: 40mm/25mm, max. roll gap: 4mm, max. roll speed: 15rpm, max. pressing force: 20kN/cm², machine dimensions X/Y/Z: approx. 1635mm/1450mm/930mm.

more

Skin and Blister Machine

Illig SB 53C

Germany

1992

used

on request

INNO27695

An Illig thermoforming machine is available. Working dimensions X/Y: 500mm/400mm, max. air pressure: 10bar, heating power: 4.5kW, motor power: 1.24kW.

more

Injection Moulding Machine

Engel/arburg/kraus Maffei

Germany

2020

used

on request

INNO27694

A total of 13 injection molding machines from various manufacturers are available. 1) Engel VC 200/80 Electric, year of manufacture: 2007, operating hours: 53,375h. 2) Engel VC 310/120 Electric, year of manufacture: 2007, operating hours: 43,708h. 3) Krauss-Maffei 650-300 c2, year of manufacture: 1996, operating hours: 51,938h, including Geiger handling robot. 4) Krauss-Maffei 300/1900 C1, year of manufacture: 2000, operating hours: 57,686h. 5) DEMAG ergotech 150-440 compact, year of manufacture: 1998, operating hours: 89,790h. 6) Arburg Allrounder 420 A 1000-400, year of manufacture: 2006, operating hours: 31,182h, including Geiger handling robot. 7) Arburg Allrounder 370 A 600-170, year of manufacture: 2009, operating hours: 36,946h, including Geiger handling robot. 8) Krauss-Maffei 300/200 CX, year of manufacture: 2011, operating hours: 17,070h, including Krauss Maffei handling robot. 9) Krauss-Maffei 110-340 c1, year of manufacture: 1995, operating hours: approx. 60,000h. 10) Krauss-Maffei 150-700 c1, year of manufacture: 2002, operating hours: 62,148h. 11) Krauss-Maffei 200-1400 CX, year of manufacture: 2016, operating hours: 26808h, including Kuka handling robot. 12) Arburg HDrive 470 H 1000-400, year of manufacture: 2009, operating hours: 38415h. 13) Arburg Golden E. 420 C 1000-290, year of manufacture: 2015, operating hours: 24337h. Documentation available. On-site inspection is possible. Expected to be available from April 2025.

more