Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [661 - 680 of 2438]

CNC Cycle Lathe

Dmtg CKE 6130

Germany

2008

used

on request

INNO28220

Turning diameter over bed: 300mm, max. workpiece length: 500mm/600mm, travel X: 319mm, feed X/Z: 3000mm/min/4000mm/min, rapid traverse X/Z: 4000mm/min/5000mm/min, speed: 4000rpm. Collet chuck: 5C 173E, spindle bore: 40mm, tool positions: 4, spindle travel of tailstock: 110mm. Machine dimensions X/Y/Z: approx. 2000mm/1450mm/1500mm, weight: approx. 1200kg, control: Fanuc Series 0i-TC. Including 380V transformer, Fluidtec spraying system, collet set and multifix holder set. Documentation available. On-site inspection is possible.

Spiral Conveyor

Ambaflex

Germany

2012

used

on request

INNO28219

Two AmbaFlex spiral conveyors are available. 1) Height: 3100mm, infeed height: 1400mm, slat width: 400mm. 2) Height: 2650mm, inlet height range: 600mm-800mm, slat width: 400mm, defects: Torque support motor and missing foot disk. Can be repaired as required before sale. Documentation available. On-site inspection is possible.

CNC Die-Sinking EDM Machine

Charmilles Optimat 505

Germany

1991

used

on request

INNO28218

Axes: 4, travel X/Y/Z: 350mm/250mm/300mm, table dimensions X/Y: 560mm/380mm, tool positions: 6, documentation available. On-site inspection is possible. The graphics card of the machine is defective.

CNC Coordinate Measuring Machine

Wenzel LH 87 3 D

Germany

2006

used

on request

INNO28217

Working range X/Y: 1000mm/2200mm, accuracy: 0.8 + L/450µm, max. workpiece weight: 800kg, machine dimensions X/Y: approx. 3000mm/2800mm, weight: approx. 4000kg. Including Wenzel HT 400 hand control, computer with 2 TFT monitors and Kyocera laser printer. Without measuring probe. Documentation available. On-site inspection is possible.

Center Lathe

Weipert WG 480

Germany

1961

used

on request

INNO28216

Swing diameter over bed/bed slide: 480mm/340mm, turning length: 800mm, center distance: 1000mm, swing diameter in the recess: 540mm, spindle bore: 52mm, speed: 1400rpm. Quill taper: MK4, manual quill adjustment: 160mm, upper part displacement: 10mm. Machine dimensions X/Y/Z: approx. 2600mm/1100mm/1350mm, weight: approx. 2300kg. On-site inspection is possible.

Upright Drilling Machine

Lindner LB 14

Germany

1940

used

on request

INNO28214

Travel X/Y: 600mm/400mm, table dimensions X/Y: 800mm/400mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/2350mm, weight: approx. 2500kg, control: 2-axis digital readout Heidenhain (retrofitted). Including various accessories. On-site inspection is possible.

Rotary Transfer Machine

Pfiffner HB32/16

Germany

2002

used

on request

INNO28213

Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible.

Rotary Transfer Machine

Pfiffner Hydromat HB3245/16

Germany

1997

used

on request

INNO28212

A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible.

CNC Milling Machine

Haas Mini Mill E

Germany

2007

used

on request

INNO28211

Travel X/Y/Z: 406mm/305mm/254mm, table dimensions X/Y: 914mm/305mm, max. table load: 227kg. Spindle speed: 6000rpm, tool holder: BT40, tool positions: 10, rapid traverse X/Y/Z: 15.2m/min. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2700mm, weight: approx. 1550kg. Including an additional control panel on request (not included in the price). Documentation available. On-site inspection is possible.

CNC Milling and Drilling

Bimatec Soraluce Soramill SL4000

Germany

1995

used

on request

INNO28210

A CNC rigid board milling and drilling center Bimatec Soraluce is available. Travel X/Y/Z: 2500mm/900mm/1600mm, speed: 2000rpm, spindle mount: ISO40/M16, tool positions: 30, transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13500kg, control: Heidenhain CNC 415, operating hours: 31507h. Including fixed table, movable stand, automatically indexing milling head, manual measuring probe, coolant device and filter system. Documentation available. On-site inspection is possible.

CNC Vertical Machining Center

Haas VF3 B

Germany

2010

used

on request

INNO28209

Travel X/Y/Z: 1016mm/508mm/635mm, speed: 10000rpm, table dimensions X/Y: 1219mm/457mm, max. table load: 1550kg, tool positions: 20, rapid traverse X/Y/Z: 25m/min/25m/min/25m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2600mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible.

CNC Turning- and Milling Center

Index G200 C

Germany

1997

used

on request

INNO28208

Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

CNC Machining Center

Kitamura Mycenter-1 Xi

Germany

unknown

used

on request

INNO28207

Positioning accuracy: +/-0.003mm, repeat accuracy: +/-0.001mm, spindle speed: 15000rpm, rapid traverse X/Y/Z: 50m/min/50m/min/36m/min, spindle power: 7.5kW, table dimensions X/Y: 355mm/786mm, max. table load: 240kg, max. tool diameter: 70mm, max. tool weight: 2kg. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2650mm, machine weight: approx. 3700kg. Documentation available. On-site inspection is possible.

CNC Machining Center

Mori Seiki MV 40

Germany

1991

used

on request

INNO28206

Travel X/Y/Z: 800mm/410mm/510mm, table dimensions X/Y: 1100mm/450mm, max. table load: 700kg. Speed: 8000rpm, power: 7.5kW, tool holder: BT40, tool positions: 30, column height: 220mm, rapid traverse X/Y/Z: 20m/min/20m/min/15m/min. Machine dimensions X/Y/Z: approx. 2500mm/2250mm/2800mm, weight: approx. 7500kg, control: MF-M4. Documentation available. On-site inspection is possible.

Universal Tool Grinding Machine

Sts L 15

Germany

1974

used

on request

INNO28201

An old universal tool grinding machine based on the modular principle is available. Stations: 2, spindle power station 1/station 2: 0.55kW/0.92kW, speed station 1/station 2: 1400rpm/2800rpm, machine dimensions X/Y/Z: approx. 1400mm/1000mm/1400mm, weight: approx. 250kg. Documentation available. On-site inspection is possible.

Remaining Stock

Thielicke/schlenker & Cie/müller/berg & Schmid WN6/ATLAS W4/OMP67F/Mini Compact

Germany

2018

used

on request

INNO28199

Various metalworking machines are available as remaining stock. 1/2/3) Three wobble riveting presses Thielicke GmbH & Co. KG WN6, year of manufacture: 1998. 4) Schlenker & Cie Atlas W4 high-speed planer, year of manufacture: 1961, weight: approx. 1700kg. 5) Spot welding machine J.u.W. Müller GmbH Opladen OMP67F, year of construction: 1960. 6) Ring welding machine Ing. G. Wenninger/BAPO KH III, year of construction: 1940s, conversion: 1964. 7) Cross-cut saw Berg & Schmid Mini Compact, year of construction: 2018. 8/9/10) Three presses. Including vices and lathe accessories. On-site inspection is possible. Individual sale possible.

CNC Machining Center

Röders RP 800

Germany

2001

used

on request

INNO28198

A CNC machining center for the HSC process (high-speed cutting) is available. Travel X/Y/Z: 800mm/600mm/400mm, table dimensions X/Y: 880mm/700mm, max. table load: 800kg, speed: 42000rpm, tool holder: HSK E50, tool positions: 30, rapid traverse: 60m/min. Machine dimensions X/Y/Z: approx. 3200mm/2900mm/3000mm, weight: approx. 8500kg. Documentation available. On-site inspection is possible.

High Pressure Pump

Hammelmann/volvo Penta TR71A

Germany

1987

used

on request

INNO28197

A high-pressure cleaning system with Hammelmann high-pressure plunger pump and Volvo Penta engine is available. Operating power: 110kW, speed: 1800rpm, max. medium temperature: 50°C, piston diameter: 30mm, max. operating pressure: 790bar, flow rate: 64l/min, pressure control valve: 096, oil type: BM 5180, oil volume: 7l, oil pressure: 2bar. On-site inspection is possible.

Positioner

Bode 25VP

Germany

2003

used

on request

INNO28195

Load capacity: 25t, center of gravity distance: 700mm, eccentricity: 250mm, speed: 0.66rpm, tilt range: 0°-130°, tilt time: 120s, table height (flat): 1930mm, axis of rotation height: 1600mm, table diameter: 2500mm, motor power tilt/rotate: 7.5kW/4.5kW, total length: 3000mm, total width: 2500mm. Documentation available. On-site inspection is possible.

Cardboard Packaging Machine

3m Matic AKS700

Germany

2007

used

on request

INNO28193

Six 3M-Matic carton gluing machines are available. 1) 3M-Matic AKS-E, year of manufacture: 2005. 2) 3M-Matic AKS-E, year of manufacture: 2006. 3) 3M-Matic AKS-I, year of manufacture: 2007. 4) 3M-Matic AKS-E, year of manufacture: 1996. 5) 3M-Matic AKS-E, year of manufacture: 1996. 6) 3M-Matic AKS-E, year of manufacture: 2006. Documentation available. On-site inspection is possible.