Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [541 - 560 of 2480]

High Consistency Refiner

Andritz RF 25

Germany

unknown

used

on request

INNO27603

A refurbished single-disc refiner including three feed screws is available. 1) Refiner MRSD 58-62, condition: completely overhauled, weight: approx. 15200kg. 2/3/5) Feeding screw RF 25, conveying diameter: 25 inch, screw speed: 600 rpm, operating pressure: 8 bar, weight: approx. 1700 kg. Documentation available. On-site inspection is possible.

Pressure Screw Feeder

Andritz PSF 14

Germany

unknown

used

on request

INNO27602

Two identical tamping screws (press screws) overhauled by Andritz are available. Diameter: 14 inches. Documentation available. On-site inspection is possible.

Bow Screen

Andritz BW1000/BW2000

Germany

unknown

used

on request

INNO27601

Two almost identical Andritz curved screening machines are available. 1) Andritz BW 1000, condition: as new in original packaging, screen width: 1100mm, wire spacing: 0,5mm, weight: 410kg, operating weight: 1100kg. 2) Andritz BW 2000, condition: overhauled by the manufacturer. Documentation available. On-site inspection is possible.

Hydro Cyclone

Andritz D900

Germany

unknown

used

on request

INNO27600

A new Krebs hydrocyclone for wood chips (wood shavings) is available. Cyclone diameter: 900mm, max. flow rate: 2500m³/h, working pressure range: 3psi-12psi, separation efficiency (d50): 2µm-180µm. Documentation available. On-site inspection is possible. The machine is in its original packaging.

Dewatering Auger

DS1x700x6000

Germany

unknown

used

on request

INNO27599

A dewatering screw for wood chips (wood shavings) as good as new is available. Screw diameter: 700mm, screw length: 6000mm, machine dimensions X/Y/Z: approx. 6600mm/1400mm/5800mm, weight: approx. 5100kg. The machine consists of upper and lower part plus chute. Documentation available. On-site inspection is possible. The machine is in its original packaging.

Vibratory Discharge Base

Zeppelin VD 2400

Germany

unknown

used

on request

INNO27598

A new vibrating discharge floor with compensator and accessories for wood chips is available. Diameter: 2400mm, material: steel, motors: 1-2, throughput: 5m³-320m³/h, weight: approx. 2950kg. Documentation available. On-site inspection is possible. The machine is in its original packaging.

Multi Spindel Lathe

Gildemeister AS 25

Germany

1991

used

on request

INNO27597

Two identical Gildemeister six-spindle bar turning machines with the corresponding bar loading magazines are available. Number of spindles: 6, max. workpiece diameter: 25mm, speed: 8000 rpm, spindle bore: 32mm, max. bar diameter: 32mm, max. bar length: 3300mm, machine dimensions X/Y/Z: approx. 8000mm/2000mm/3000mm, weight: approx. 5000kg. Including bar loading magazines.

Piston Compressor

Aircraft Alpha 1152/500

Germany

1999

used

on request

INNO27596

Suction capacity: 115l/min, max. pressure: 10bar, tank capacity: 500l, engine power: 11hp, temperature range: -20°C/150°C, machine dimensions X/Y/Z: approx. 1500mm/500mm/800mm, weight: approx. 150kg, operating hours: 3422h.

Air Conditioning System

York ARH 045 A

Germany

unknown

used

on request

INNO27595

Air flow rate: 11500m³/h, cooling capacity: 45kW, heating capacity: 45kW, energy consumption cooling/heating: 16kW/16kW, EER: 3.19, temperature range: -10°C/46°C. Machine dimensions X/Y/Z: approx. 3200mm/2400mm/1200mm, weight: approx. 1200kg.

Glass Cutting Machine

4jet Microtech Diamond M

Germany

2020

used

on request

INNO27594

Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available.

Vacuum Dissolver

Grieser GFVD 150

Germany

2004

used

on request

INNO27593

A Grieser pilot plant vacuum dissolver for highly viscous liquids is available. Volume: 150l, dissolver output: 22kW, vacuum pump output: 2.2kW, toothed disk diameter: 250mm, toothed disk speed: 1800rpm. Including hydraulic unit for the lifting column, hopper, sight glass with lamp, product temperature sensor, explosion-proof design and switch cabinet with inert gas flushing. Documentation available. On-site inspection is possible.

Window Manufacturing Machine

Selecta/zierke/mla/urban/hoffmann BSS/MLA/PU2-VH/M7

Germany

2015

used

on request

INNO27592

Individual sale possible. A variety of semi-automatic and automatic window construction machines are available. 1) Selecta BSS, year of manufacture: 1994, machine dimensions X/Y/Z: approx. 800mm/500mm/1200mm, weight: approx. 50kg. 2) Pneumatic press Urban, year of manufacture: 2011, operating pressure: 0.8MPa, air consumption: 4l/stroke, stroke: 20mm, machine dimensions X/Y/Z: approx. 850mm/850mm/1200mm, weight: approx. 130kg. 3) Pneumatic grooving machine Hoffmann PU2-VH, year of construction: 2002, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 4) Hoffmann PP2-FR chain milling machine for mullions and transoms, year of manufacture: 2004, machine dimensions X/Y/Z: approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 5) Selecta FC 106, year of manufacture: 1994, machine dimensions X/Y/Z: approx. 1000mm/800mm/1550mm, weight: approx. 50kg. 6) Batimet FOM wood and aluminum punching machine, year of manufacture: 2004, machine dimensions X/Y/Z: approx. 1000mm/1100mm/1500mm, weight: approx. 60kg. 7) MLA M7 GLF 100, year of manufacture: 2015, power: 1.1kW, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 750mm/850mm/1200mm, weight: approx. 50kg. 8) Machine dimensions X/Y/Z: approx. 400mm/400mm/1250mm, weight: approx. 50kg. 9) Wood and aluminum mitre saw Hoffmann MS-35, year of construction: 2003, power: 2 x 18kW, machine dimensions X/Y/Z: approx. 1200mm/800mm/1500mm, weight: approx. 200kg. 10/11) Combination angle processing machines SCM Method K, year of construction: 1994, first machine dimensions X/Y/Z: approx. 1700mm/2700mm/1500mm, weight: approx. 1000kg, second machine dimensions X/Y/Z: approx. 1700mm/3000mm/1900mm, weight: approx. 1200kg. 12) Anno, year of construction: 1993, machine dimensions X/Y/Z: approx. 800mm/1400mm/2200mm, weight: approx. 120kg. On-site inspection is possible.

Granulation Mill

Getecha RS 2404

Germany

2018

used

on request

INNO27591

Cutting circle diameter: 240mm, cutting chamber opening X/Y: 465mm/330mm, rotor knives: 3 x 2, stator knives: 2, motor power: 5.5kW, throughput: approx. 100kg-160kg/h, machine dimensions X/Y/Z: approx. 1400mm/900mm/800mm. Including feed device (diameter: 96mm, width: 150mm), dancer arm extrusion, angle sensor and vector FU. Documentation available.

Granulation Mill

Getecha RS 45090

Germany

2012

used

on request

INNO27590

Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available.

Cutting Mill

Getecha GRS 300

Germany

2022

used

on request

INNO27589

A Getecha plastic granulator is available. Rotor diameter: 300mm, cutting width min./max.: 400mm/1260mm, number of rotor knives: 5, power: 5.5kW. Including an enlarged control cabinet. Overhauled with less than 100 operating hours. Documentation available.

Web Guiding and Tension Control System

Erhardt & Leimer BVW/PFW

Germany

2007

used

on request

INNO27588

An Erhardt & Leimer web guiding and tension control system for the corrugated board industry is available. Working width: 2500mm. Documentation available. On-site inspection is possible. Expected to be available from the end of February 2025.

Slitter-Scorer

Erhardt & Leimer TOS 0330

Germany

2007

used

on request

INNO27587

An Eberhardt & Leimer cutting and creasing machine for the corrugated board industry is available. Working width: 2500mm, running direction: left-right. Documentation available. On-site inspection is possible. Expected to be available from the end of February 2025.

Corrugated Board Stacker

Bhs AAR-2

Germany

1989

used

on request

INNO27586

A corrugated board double stacker for the corrugated board industry is available. Working width: 2500mm, type: double stacker (double down stacker), outputs: 2, running side: left-right, max. stacking capacity: 220m/min, roll diameter infeed roll/upper roll: 160mm/165mm, control: Siemens S5. Documentation available. On-site inspection is possible. Expected to be available from the end of February 2025.

Cutting Machine

Bhs HQ-M

Germany

2011

used

on request

INNO27585

A BHS cut-off double cutting machine for the corrugated board industry is available. Working type: Cutting machine (Cut Off), working width: 2500mm, drive power: 2x45kW per level, cutting speed: 400m/min, material weight: 1800g/m², control: Siemens S7. Documentation available. On-site inspection is possible. Expected to be available from the end of February 2025.

Cutting Machine

Marquipwardunited M4 MCS Dual

Germany

2006

used

on request

INNO27584

A rotary cutting machine for the corrugated board industry is available. Working width: 2500mm, control: Allen Bradley, running direction: left-right. Documentation available. On-site inspection is possible. Expected to be available from the end of February 2025.