Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [561 - 580 of 2480]

Double Backer

Bhs DWR 18

Germany

1989

used

on request

INNO27583

A double facer (double backer) for the production of corrugated board is available. Working width: 2500mm, internal steam lines, modular lifting device, Mühlen Sohn corrugated board conveyor belt, Aqua Ultra AE200 with edge protection (200mm) for the upper belt and Aqua Pull S for the lower belt. Documentation available. On-site inspection is possible. Expected to be available from the end of February 2025.

Edge Banding Machine

Homag KAL 221 Edition 2264

Germany

2012

used

on request

INNO27582

Max. gluing thickness: 20mm, max. panel thickness: 40mm, max. roll material thickness: 3mm, feed rate: 25m/min, machine length: approx. 7800mm. Including a workpiece return system Homag TFU 140, year of construction: 2017, max. workpiece width: 1250mm, max. workpiece length: 2700mm, conveyor belt length: 10500mm, operating hours: approx. 26000h. Documentation available. On-site inspection is possible. Expected to be available from mid-October 2024.

Hardening Oven

Caldatrac CDF 60/90/60

Germany

2001

used

on request

INNO27580

Internal dimensions X/Y/Z: 600mm/900mm/600mm, nominal temperature: 350°C, heating capacity: 13.5kW, usable space: 0.32m³, total steam space: 0.57m³, min. exhaust air volume flow: 120m³/h.

Shearing Machine

Sucker Müller Tigercut PRC 2

Germany

1997

used

on request

INNO27579

Shearing units: 2, working width: 2600mm, max. fabric width: 2600mm. Including return, panel cabinet and control cabinet.

Inspection System

Mettler Toledo Ci-Vision 2 Cam Container

Germany

2013

used

on request

INNO27578

Output: 1000/min, number of cameras: 2. On-site inspection is possible.

Blister And Cartoning Machine

Klöckner CP200/P1500

Germany

2003

used

on request

INNO27576

A Klöckner blister packaging machine and cartoner are available. 1) Blister machine Klöckner CP200, year of manufacture: 2003, output: 50/min, formats X/Y min./max.: 50mm x 22mm/156mm x 115mm, max. draw depth: 12mm, film width range: 100mm-168mm, forming film diameter: 450mm, lidding film diameter: 240mm. Documentation available. 2) Cardboard packaging machine Klöckner P1500, year of construction: 2003, packaging capacity: 200/min, formats X/Y/Z min./max.: 20mm x 15mm x 50mm/250mm x 115mm x 190mm, machine dimensions X/Y/Z: approx. 5200mm/1500mm/1900mm, weight: approx. 4000kg, control: Siemens S7 PLC. Documentation available. Some parts of the machines have been dismantled.

Water Jet Cutting Machine

Hezinger/kmt Waterline

Germany

2018

used

on request

INNO27575

A complete Hezinger/KMT water jet system is available. 1) Pump: KMT SLV-50, oil filling: 151l, max. pressure: 3792bar, power: 37kW, machine dimensions X/Y/Z: approx. 1700mm/914mm/1450mm, weight: approx. 1180kg. 2) Hopper Abraline V, operating pressure: 30psi-65psi, capacity: 425kg, max. flow rate: 1kg/min, machine dimensions X/Y/Z: approx. 860mm/860mm/1400mm, weight: approx. 120kg. Documentation available. On-site inspection is possible.

Diecasting Plant

Oskar Frech DAK 200

Germany

1989

used

on request

INNO27574

An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available.

CNC Machining Center

Hartford MVP-10

Germany

2008

used

on request

INNO27569

Travel X/Y/Z: 1050mm/530mm/630mm, speed: 12000rpm, control: Heidenhain iTNC 530, operating hours: approx. 26000h. Documentation available.

CNC Tool Milling Machine

Deckel Maho FP2A

Germany

unknown

used

on request

INNO27568

Travel X/Y/Z: 300mm/300mm/400mm, speed: 4000rpm, spindle mount: ISO40, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, spindle power: 4kW. Machine dimensions X/Y/Z: approx. 2000mm/3000mm/2000mm, weight: approx. 1500kg.

CNC Cycle Lathe

Challenger Microturn BNC-446

Germany

2009

used

on request

INNO27567

Max. workpiece diameter: 446mm, max. turning length: 600mm, spindle bore: 52mm, speed: 3500rpm, spindle power: 11kW, quill diameter: 65mm, quills: MK4, bed guide: 300mm, tool slots: 8, . Machine dimensions X/Y/Z: approx. 2230mm/1560mm/1790mm, weight: approx. 2100kg, control: Siemens Sinumerik 828D. Documentation available.

Production Table

Weinmann

Germany

1999

used

on request

INNO27566

A production table for the wood industry is available. Table length: 11000mm, table width: 2500mm. On-site inspection is possible.

Wood Working Center

Weinmann

Germany

1999

used

on request

INNO27565

A production line for the wood industry is available. 1) Production table 1: Table length: 11900mm, production width: 2500mm-3200mm, working height: 750mm, work table covering: multi-layer board, drive type: chains/2 strands with rollers. Including longitudinal stop, transverse stop and longitudinal conveyor. 2) Production table 2: Table length: 11900mm, production width: 2500mm-3200mm, working height: 750mm, work table surface: multi-layer board, drive type: chains/2 strands with rollers. Including longitudinal stop, transverse stop and longitudinal conveyor. 3) Intermediate transport: length: 2770mm, width: 2000mm, height: 770mm, drive type: chains. Multifunction bridge: Aggregates: 6, clamps: 4, drilling/chipping: 2, suction: Longitudinal with one suction channel. Including manual film unwinder. Documentation available. An on-site inspection is possible. Expected to be available from January 2025.

CNC Milling Machine

Hartkämper AL 40/200

Germany

1999

used

on request

INNO27564

The buffer battery must be replaced. Machine dimensions X/Y/Z: approx. 5500mm/2700mm/3100mm, control: Heidenhain.

Lathe

Germany

1964

used

on request

INNO27562

Center height: 350mm, center width: 3000mm, spindle bore: 90mm.

CNC Machining Center

Hurco BMC 4020 HT

Germany

1998

used

on request

INNO27561

Travel X/Y/Z: 1000mm/500mm/600mm, speed: 6500rpm, spindle power: 15kW, spindle mount: SK40, tool slots: 24, rapid traverse X/Y/Z: 20m/20m/13.5m/min, table dimensions X/Y: 1220mm/510mm, max. workpiece weight: 1500kg. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2500mm, weight: approx. 5500kg, operating hours: 204h. Documentation available. On-site inspection is possible.

CNC Machining Center

Chiron FZ08KS Magnum

Germany

2004

used

on request

INNO27560

A machining center FZ08KS Magnum overhauled by Chiron in 2017 is available. Travel X/Y/Z: 450mm/270mm/310mm, speed: 15000rpm, rapid traverse X/Y/Z: 75m/min, swivel head swivel range: -20°-115°. Tool slots: 40, tool holder: HSK-A40. Total system dimensions X/Y/Z: approx. 11500mm/2600mm/2500mm, weight: Chiron: 3200kg, loading magazine: 1300kg, chip conveyor: 500kg, cooling lubricant system: 1500kg, operating hours: 30682h, control: Siemens Sinumerik 840D. Including loading magazine, KNOLL coolant system and chip conveyor. Documentation available. On-site inspection is possible.

Lift Truck

Still EXD-SF20

Germany

2012

used

on request

INNO27559

Two almost identical Still pallet trucks are available. Load capacity: 2000kg, drive: electric, drive power: 2.3kW, max. battery capacity: 375Ah, lifting height: 2110mm, wheelbase: 1518mm, tire type: polyurethane, fork length: 1150mm. Machine dimensions X/Y/Z: approx. 2100mm/720mm/1300mm, weight: approx. 1100kg, operating hours 1/2: 4472h/4904h. Documentation available. On-site inspection is possible.

Electric Forklift Truck

Linde E16C

Germany

1997

used

on request

INNO27558

Load capacity: 1600kg, lifting height: 4000mm, free lift: 1500mm, overall height: 1970mm, turning radius: 1505mm, travel speed: 16km/h, lifting speed: 0.6m/s, lowering: 0.58m/s, tires: superelastic, fork length: 1200mm, drive: electric, weight: approx. 3300kg, operating hours: 9052h. Documentation available. On-site inspection is possible.

Gasl Forklift Truck

Linde H20T/H25T

Germany

2007

used

on request

INNO27557

Two Linde gas forklift trucks are available. 1) 4-wheel forklift Linde H20T, year of manufacture: 2007, load capacity: 2000kg, mast type: standard, lift height: 3850mm, overall height: 2546mm, free lift: 150mm, fork length: 1200m, tires: superelastic, operating hours: 3900h. 2) 4-wheel forklift Linde H25T, year of manufacture: 2002, load capacity: 2500kg, lift height: 3050mm, overall height: 2254mm, free lift: 150mm, fork length: 1200mm, tires: Superelastic, operating hours: 6044h. Documentation available. On-site inspection is possible.