Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [801 - 820 of 2480]

Centrum obróbcze CNC

Axa DBZ 2

Niemcy

2012

używany

na żądanie

INNO27230

Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available.

Maszyna do formowania wtryskowego

Arburg 370C 1000-250

Niemcy

2002

używany

na żądanie

INNO27229

Clamping force: 1000kN, screw diameter: 30mm, platen dimensions X/Y: 570mm/570mm, opening stroke: 500mm, min./max. mold height: 250mm/750mm, injection weight: 121g/hp, injection volume: 106cm³, operating hours: 75320h.

Wózek widłowy

Jungheinrich ETV 214

Niemcy

2003

używany

na żądanie

INNO27228

Load capacity: 1400kg, total width: 1270mm, overall height: 3300mm, tires: polyurethane, load center: 600mm, voltage: 48V, traction motor power: 6kW, tare weight: 2736kg, battery weight: 750kg, lifting height: 10.25m, turning radius: 1613mm, travel speed: 14km/h, operating hours: 13573h. Charger included. Documentation available.

Linia do powlekania proszkowego

Wagner ID-Kabine/PEM-C4-HiCoat

Niemcy

2022

używany

na żądanie

INNO27223

A Wagner powder coating system is available. Cabin: ID cabin, air flow rate: 4000m³/h, max. recovery rate: 98%, max. workpiece dimensions X/Y/Z: 1200mm/1000mm/1500mm, filter type: HEPA. Dimensions X/Y/Z: approx. 2500mm/1200mm/1800mm, weight: approx. 750kg. Powder spray gun: PEM-C4-HiCoat, nozzle diameter: 20mm/28mm/38mm, nozzle material: steel. Documentation available. On-site inspection is possible.

Szlifierka powierzchniowa

Wmw SFW 200x600

Niemcy

nieznany

używany

na żądanie

INNO27213

Sanding length/width: 600mm/200mm, workpiece height: 400mm, table adjustment X/Y: 710mm/250mm, table speed: 15m-18m /min, magnetic table dimensions X/Y: 20mm/600mm, table-spindle distance: 500mm, speed: 2800rpm. Dimensions X/Y/Z: approx. 2400mm/1200mm/1900mm, weight: approx. 1400kg. Including various grinding wheels.

Maszyna do formowania wtryskowego

Boy 55M

Niemcy

2005

używany

na żądanie

INNO27212

Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included.

Zewnętrzna szlifierka cylindryczna

Fortuna AFB A

Niemcy

1961

używany

na żądanie

INNO27211

Grinding wheel diameter: 200mm, motor power: 7.5kW, max. workpiece diameter/length: 270mm/500mm, center stroke: 135mm, weight: approx. 2500kg. Including copying device with accessories. Documentation available.

Frezarka narzędziowa CNC

Mikron WF 51C/15S

Niemcy

1986

używany

na żądanie

INNO27210

Travel X/Y/Z: 800mm/500mm/460mm, feed X/Y/Z: 3000mm/min, rapid traverse X/Y/Z: 6000mm/6000mm/400mm/min, max. workpiece weight: 500kg, speed: 3150rpm, spindle power: 8kW, spindle bore: 110mm, tool holder: ISO40/M16. Dimensions X/Y/Z: approx. 2700mm/2300mm/2300mm, weight: approx. 3100kg, control: Heidenhain TNC 150, vice included.

Frezarka

Steinel BZ20

Niemcy

1982

używany

na żądanie

INNO27209

Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier.

Maszyna do formowania wtryskowego

Arburg 270 S 250-100

Niemcy

2013

używany

na żądanie

INNO27208

Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module.

Tokarka cykliczna CNC

Wagner WDE 360

Niemcy

2014

używany

na żądanie

INNO27207

Travel X/Y: 230mm/870mm, speed: 3000rpm, max. spindle bore 52mm, max. turning diameter over bed/face slide: 360mm/180mm, max. workpiece length: 870mm, bed width: 1000mm, max. tailstock stroke: 130mm, max. quill diameter: 63mm. Dimensions X/Y/Z: approx. 2500mm/1700mm/2000mm, weight: approx. 1600kg. Documentation available.

Wiertarka do głębokich otworów

Tbt T60

Niemcy

nieznany

używany

na żądanie

INNO27206

Drilling diameter: 25mm-60mm, drilling depth: 1800mm, feed force: 10kN, clamping table dimensions X/Y: approx. 850mm/750mm, tool holder: HKS-A50, tool positions: 20, speed: 2900rpm, power: 15 kW. Including chip conveyor.

Wiertarka do głębokich otworów

Tbt T30-1000 KTN/NC

Niemcy

nieznany

używany

na żądanie

INNO27205

Travel X/Y/Z: 700mm/300mm/1000mm, rapid traverse X/Y/Z: 4000mm/4000mm/2000mm /min, drilling method: ELB, number of drilling spindles: 1, min./max. drilling diameter: 4mm/30mm, max. drilling depth: 1000mm, table dimensions X/Y: approx. 850mm/750mm.

Wiertarka do głębokich otworów

Tbt T10-500

Niemcy

nieznany

używany

na żądanie

INNO27204

Drilling diameter: 2mm-10mm, max. drilling depth: 500mm, drilling method: ELB, speed: 8000rpm. Dimensions X/Y/Z: approx. 2300mm/1300mm/1600mm, weight: approx. 2000kg. Including cooling with automatic filter and magnetic chip conveyor.

Maszyna do cięcia z laserem CNC

Amada Quattro 1kW

Niemcy

2008

używany

na żądanie

INNO27202

Laser power: 1kW, laser type: CO2, control: Fanuc 160i-L, working range X/Y/Z: 1250mm/1250mm/100, max. sheet thickness (steel): 12mm, max. sheet weight: 160kg, positioning speed X/Y/Z: 30m/30m/15m /min. Dimensions X/Y/Z: approx. 2200mm/2900mm/2000mm, weight: approx. 3300kg. Documentation available.

Centrum obróbcze CNC

Deckel Maho DMC 60 U hi-dyn

Niemcy

2007

używany

na żądanie

INNO27201

Travel X/Y/Z: 700mm/700mm/600mm, speed: 18000rpm, table dimensions X/Y: 630mm/500mm, tool holder: ISO40, tool magazine capacity: 60, control: Heidenhain MillPlus IT. Operating hours: 29107h, spindle hours: 12086h. Documentation available.

Tokarka CNC

Ergomat TD 26

Niemcy

2005

używany

na żądanie

INNO27200

Two identical Ergomat lathes are available. Spindle capacity: max. tube material: 26mm, max. solid material: 26, max. hexagonal material: 22mm, max. square material: 18mm. Distance between collet and tailstock: 285mm, max. turning length: 70mm, production output per hour min./max.: 22/1882, main spindle power: 2.2kW, speed: 4750rpm, vertical/horizontal slide travel: 35mm/35mm. Dimensions X/Y/Z: approx. 1500mm/1400mm/600mm, weight: approx. 850kg. Documentation available. On-site inspection is possible.

Maszyna do sitodruku

Europa-siebdruck-centrum AT-PA45

Niemcy

2008

używany

na żądanie

INNO27199

Max. print format X/Y: 300mm/450mm, print table dimensions X/Y: 400mm/600mm, vacuum area X/Y: 345mm/465mm, max. screen frame format: 500mm/750mm, screen frame profile: 20mm-30mm. Max. print material thickness: 260mm, print table height: 945mm + 30mm, screen frame lift: 300mm. Print head speed: 100mm-500mm /s, max. cycle output: 800p/h. Dimensions X/Y/Z: approx. 900mm/750mm/1700mm, weight: approx. 300kg. Documentation available. On-site inspection is possible.

Pionowe centrum obróbcze CNC

Mazak AJV 60/120

Niemcy

1990

używany

na żądanie

INNO27196

Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible.

Frezarka CNC

Mazak FH 880

Niemcy

1997

używany

na żądanie

INNO27195

Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible.