▷ Używane maszyny do produkcji opakowań z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Maszyny do produkcji opakowań

Inne maszyny 11 Klejarki do pudełek składanych 1 Kopertownice 11 Laminowanie linii 8 Maszyny do cięcia 14 Maszyny do produkcji torebek 6 Maszyny etykietujące 3 Maszyny nawijające 6 Maszyny perforowane 1 Płyta wykrawająca 2 Prasy 2 Produkcja i przetwarzanie tektury falistej 2 Produkcja tektury falistej 1 Składarki 1 Wykrawanie 5

Innovac maszyny-uzywane

Maszyny do produkcji opakowań [1 - 20 of 74]

Maszyna do konwersji folii

Rhs 1100

Niemcy

2006

używany

na żądanie

INNO28950

A machine for the production of plastic bags is available, working width: 2x 80-550mm, working width over coupling: 1100mm, cut-off lengths: 85-800mm, max. web speed (without additional device): approx. 50m, max. working cycles: 160/min, control: Panel PC 12.1 inch TFT 800x600. With documentation, on-site inspection is possible, but not under power, was dismantled 4-5 years ago, has been regularly serviced.

Laminator

Billhöfer EK-102/50M

Niemcy

2000

używany

na żądanie

INNO28935

Application: Dispersion adhesive and thermal film lamination, min. sheet size: 210mm/210mm, max. sheet size: 1000mm/1420mm, max. pile weight: 900kg, paper weight range: 50g-600g/m², film thickness range: 12µm-70µm, film type: BOPP/acetate, adhesive quantity: approx. 8g-30g/m², lamination speed: 50m/min. Including sheet feeder A-20 with Mabeg suction head, powder removal, smoothing calender, sheet separator TM-3 and pile delivery S-4. Documentation available. On-site inspection is possible.

Laminator

Billhöfer KM 1200

Niemcy

1984

używany

na żądanie

INNO28934

Minimum sheet size: 210mm/300mm, maximum sheet size: 1180mm/1600mm, production speed: 45m/min, paper weight range: 80g-600g/m², total machine length: 11000mm, total machine width: 3500mm. An on-site inspection is possible.

Bobiniarka rolowa

Samex RollMaster Mini Ultra

Niemcy

2018

używany

na żądanie

INNO28872

A cutting machine for cutting materials from a roll is available. Cutting width: 1600mm, rear table depth: 1400mm, table height range: 870mm-900mm, table top thickness: 25mm, cutting height: 25mm, cutting speed: 1m/s, machine dimensions X/Y: approx. 2200mm/2100mm. Documentation available. On-site inspection is possible.

Termiczna prasa drukarska

Wagner IV AS 102x102

Niemcy

2019

używany

na żądanie

INNO28871

A Wagner fusing press is available. Panel dimensions X/Y: 1020mm/1020mm, heating capacity: 20.4kW, connected load: 21kW. Documentation available. On-site inspection is possible.

System laminowania

Suchy/klieverik/tekatex

Niemcy

2021

używany

na żądanie

INNO28861

A complete laminating line is available. General data: Fabric weight range: 125g/m²-1800g/m², fabric width range: 1050mm-3200mm, upper roller width: 3400mm, creep speed: 2m/min, creep speed: 10m/min, production speed: 100m/min, total system length: 28100mm. 1) Fabric storage infeed and outfeed Suchy, year of construction: 2012, roller width: 3400mm, guide roller diameter: 200mm, max. fabric thickness: 20mm, max. fabric width: 3200mm, fabric storage: approx. 50m, operating speed: 60m/min, machine dimensions X/Y/Z: approx. 4200mm/5550mm/3600mm, weight: approx. 4250kg. 2) Powder control Klieverik, scattering roller width: 3500mm, scattering roller diameter: 188mm, max. scattering width: 3200mm, max. scattering capacity: 2000g/m/min, powder size range: 100µm-600µm, machine dimensions X/Y/Z: approx. 4750mm/600mm/700mm, weight: approx. 1100kg. 3) Laminating machine Klieverik, year of construction: 2012, printing blanket dimensions X/Y/Z: 7310mm/3500mm/7mm, heating power: 100kW, heating cylinder diameter: 760mm, thermal oil tank: 800l, max. working temperature: 240°C, heating time at 3m/min and 6m/min: approx. 2h/3h, machine dimensions X/Y/Z: approx. 2100mm/5000mm/2300mm, weight: approx. 9000kg. 4) Winder Tekatex WL-35, year of construction: 2022/2023, working width: 3500mm, machine dimensions X/Y: 4500mm/1050mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.

Maszyna do druku kopert

Winkler + Dünnebier 341 GS

Niemcy

2000

używany

na żądanie

INNO28841

Format range: Envelopes min./max.: 114x176mm/254x324mm, Booklet min./max.: 114x127mm/270x360mm, Pockets: With center seams min/max: 114x178mm/330x406mm, With side seams min/max: 114x178mm/254x406mm. Output: Dextrin or peel and seal: 600/min, latex gumming: 400/min. Documentation available. On-site inspection is possible.

Maszyna do cięcia

Polar Mohr Polat 107 EL

Niemcy

nieznany

używany

na żądanie

INNO28733

Cutting width: 1070mm, cutting height: 165mm, minimum residual cut: 32mm. On-site inspection is possible.

Wytłaczarka

Wpm 400 B

Niemcy

2000

używany

na żądanie

INNO28698

Materials: paper/cardboard/solid board/corrugated board, min. paper weight: 80g/m², max. cardboard and solid board weight: 2000g/m², max. corrugated board thickness: 4mm, stack height at feeder/outfeed: 1700mm/1800mm. Punching force: 400t, min. sheet size: 350mm/400mm, max. sheet size: 820mm/1130mm, machine speed: 9000 sheets/h. Documentation available. On-site inspection is possible. Expected to be available from August 2025.

Maszyna do cięcia

Polar 115ED-AT

Niemcy

1997

używany

na żądanie

INNO28695

Working width: 1150mm, insertion depth: 1150mm, max. stack height: 165mm, pressing force: 4500daN, saddle speed (return): 300mm/s, blade speed: 45 cuts/min, residual cut with/without cover plate: 95mm/25mm, power: 7.5kW, weight: approx. 3200kg. On-site inspection is possible.

Składarka

Mbo FW 56/4

Niemcy

nieznany

używany

na żądanie

INNO28627

An MBO folding machine is available. Buckle plates: 4, max. paper width: 560mm. On-site inspection is possible.

Przewracarka stosów

Krifft & Zipser E 230 RL/MZ/SO

Niemcy

2011

używany

na żądanie

INNO28610

A Krifft & Zinser pallet turning machine is available. Connected load: 24kW, machine weight: approx. 4500kg. Documentation available. On-site inspection is possible.

Wykrawarka z płaskim stołem

Bobst Autoplatine SPO 160-A Matic

Niemcy

1994

używany

na żądanie

INNO28550

A Bobst die-cutting machine for the corrugated board industry is available. Format dimensions X/Y: 1600mm/1100mm, min. sheet dimensions X/Y: 400mm/5200mm, die-cutting force: 400t, die-cutting speed: 6500/h, number of colors: 3, flute type: single/double. Including pressure unit Bobst Flexo 160, feeder Roda and crusher Pallmac. Documentation available. On-site inspection is possible.

Laminator

Herbert Olbrich Beschichtungs- und Kaschiermaschine

Niemcy

2007

używany

na żądanie

INNO28545

A complete Olbrich adhesive coating and laminating line is available. Roller diameter: approx. 300mm, infeed floor height: 1000mm, outfeed floor height: 1200mm. Including drum melter and pump unit. On-site inspection is possible.

Maszyna do cięcia tulei

Eberle CO2/330/20/2000/MS2

Niemcy

2000

używany

na żądanie

INNO28544

A fully automatic Eberle core cutting machine for the packaging industry is available. Core size range: 76mm-152mm, max. core length: 3000mm. On-site inspection is possible.

Maszyna do cięcia

Helios 0.1556.K

Niemcy

2007

używany

na żądanie

INNO28543

Height: approx. 2000mm, cutting width: 1600mm, control: Siemens. Documentation available. On-site inspection is possible.

Maszyna do druku kopert

Winkler + Dünnebier Helios 135

Niemcy

1967

używany

na żądanie

INNO28521

A Winkler + Dünnebier envelope printing machine is available. Envelope type: peel & seal gumming, format range side seam min./max.: 114mm x 150mm/330mm x 450mm, format range center seam min./max.: 114mm x 150mm/230mm x 450mm, paper weight range: 70g-165g/m², production output: 250 envelopes/min. Including vacuum pump and blow air pump. Documentation available. On-site inspection is possible.

Maszyna workowa

Honsel & Co. 722

Niemcy

nieznany

używany

na żądanie

INNO28479

A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder. The machine is partially dismantled. Toothed belts must be tensioned and partially replaced. Toothed belt wheels are disassembled and must be installed. On-site inspection is possible.

Maszyna workowa

Honsel & Co. 722

Niemcy

nieznany

używany

na żądanie

INNO28478

A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder, folding table and deposit table with counter and feed. On-site inspection is possible.

Maszyna do płaskich worków

Honsel & Co./pcm Krause P44

Niemcy

2003

używany

na żądanie

INNO28477

A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible.