Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [401 - 420 of 2480]

Tokarka

Weipert W500

Niemcy

1972

używany

na żądanie

INNO27749

Rotation diameter over bed: 530mm, turning length: 800mm, center distance: 1000mm, bore: 63mm, max. quill adjustment: 225mm, speed: 900rpm, spindle power: 15kW. Machine dimensions X/Y/Z: approx. 2700mm/1400mm/1300mm, weight: approx. 3300kg. Documentation available. On-site inspection is possible.

Tokarka

Schaerer UD 500

Niemcy

1965

używany

na żądanie

INNO27748

Swing diameter over bed/face slide: 520mm/310mm, max. center distance: 3000mm, spindle bore: 62mm, taper diameter: 70mm, three-jaw chuck clamps up to: 315mm, wheel width: 68mm, wheel diameter: 168mm/200mm, spindle power: 20kW, machine dimensions X/Y/Z: approx. 5000mm/1300mm/1300mm, weight: approx. 4000kg. The lathe has been converted for knurling, so normal turning work is not possible. Documentation available. On-site inspection is possible.

Cela spawalnicza robota

Reis TYPRV20-16-RSVI

Niemcy

2015

używany

na żądanie

INNO27746

Welding robot: RV20-16 with turntable, welding source: Merkle High Pulse 551 RS, positioner: integrated welding positioner, cabin equipment: double station with high-speed doors, welding type: MIG/MAG welding. Machine dimensions X/Y/Z: approx. 3800mm/2400mm/2200mm, weight: approx. 3750kg. Including all available tools, spare parts and accessories. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Krauss Maffei KM 110-380 CX

Niemcy

2011

używany

na żądanie

INNO27745

Clamping force: 1100kN, tie bar clearance: 470mm/470mm, opening stroke: 1000mm, min. mold installation height: 300mm, screw diameter: 40mm, specific injection pressure: 1860bar, max. stroke volume: 201cm³, connected load: 30kW, control: MC5. Machine dimensions: 4600mm/2650mm/2250mm, machine weight: 8t, operating hours: 57,020h. Available from December 2024, including special accessories, Krauss Maffei LRX 100, 6x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, separator flap, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available.

Maszyna do formowania wtryskowego

Krauss Maffei KM 250-1400 C1

Niemcy

2002

używany

na żądanie

INNO27744

Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available.

Zwijarka czterowalcowa do blachy

Promau/davi MCB2024

Niemcy

2007

używany

na żądanie

INNO27742

Number of rolls: 4, working width: 2000mm, roll length: 2050mm, top roll diameter: 240mm, side roll diameter: 180mm, max. sheet thickness round bending/pre-bending: 16mm/13mm, yield strength: 260MPa, tensile strength: 400MPa, main drive: 11.25kW. Machine dimensions X/Y/Z: approx. 2600mm/2200mm/1200mm, weight: approx. 12000kg, control: Easy-Pro-CNC. Including a second exchangeable top roller. Only stainless steel was processed on the machine. Documentation available. On-site inspection is possible.

Wyciskanie na zimno

Dr. Fritsch KP 35

Niemcy

2000

używany

na żądanie

INNO27741

A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Maszyna do klejenia kartonów składanych

Bobst Domino 50

Niemcy

1999

używany

na żądanie

INNO27740

Production output: 450m/min, max. format size: 900mm/800mm, min. format size: 126mm/60mm, material: solid board and corrugated board, max. grammage: 600g/m². Including Siat carton sealing machine and BVS box sealing machine. Documentation available. On-site inspection is possible.

Beczka

Niemcy

nieznany

używany

na żądanie

INNO27739

A total of 32 barrels are available. Individual barrel volume: 200l. The condition of the barrels is rinsed, there are no residues. On-site inspection is possible by arrangement.

Maszyna do formowania próżniowego

Geiss DU 2400 x 1200 T9

Niemcy

2011

używany

na żądanie

INNO27738

Max. mold dimensions X/Y: 2400mm/1200mm, max. plate dimensions X/Y: 2350mm/1150mm, max. mold installation height: 900mm, total connected load: 285.3kW, rated operating current: 413A, heating capacity top + bottom: 277.7kW, air consumption: 1600l/cycle. Machine dimensions X/Y/Z: approx. 4500mm/4700mm/4700mm, weight: approx. 12500kg, control: Siemens with OP 35, documentation available. On-site inspection is possible.

Tokarka CNC

Mazak SQT 25 MS

Niemcy

1999

używany

na żądanie

INNO27737

Turning diameter: 300mm, turning diameter: 525mm, turning length: 550mm, spindle bore: 76mm, max. bar diameter: 64mm, max. chuck diameter: 250mm. Spindle speed: 4000rpm, spindle power: 22kW, max. spindle torque: 351Nm, spindle nose-turret face distance: 115mm-690mm. Tool slots: 12, shank diameter: 25mm, drill shank diameter: 40mm, max. turret indexing time: 0.2s-0.6s. Traverse path X/Z/counter spindle: 190mm/575mm/585mm, rapid traverse X/Z: 30m/min, rapid traverse C: 400rpm, rapid traverse B: 18m/min, C-axis swivel: 360°. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2500mm, weight: approx. 6000kg, control: PC Fusion CNC 640T, operating hours: approx. 5000h. Without bar loader, Rotaryscale defective. Documentation available. On-site inspection is possible.

Szlifierka do powierzchni CNC

Stöckel FNX 850 Z NC-T

Niemcy

2020

używany

na żądanie

INNO27736

A CNC profile and surface grinding machine Stöckel is available. Travel X/Y/Z: 850mm/680mm/475mm, guide X/Y/Z: sliding guide/linear guide/linear guide, table dimensions X/Y: 800mm/500mm, table feed: 30m/min, drive X/Y/Z: Toothed belt/ball screw/ball screw, feed: Y/Z: 2000mm/min, fine adjustment X/Y/Z: from 0.001mm, speed: 4000rpm, spindle taper: 60mm, spindle power: 11kW, grinding wheel dimensions X/Y/Z: 400mm/50mm/127mm. Machine dimensions X/Y/Z: approx. 3500mm/2700mm/2300mm, weight: approx. 4300kg, operating hours: 16156h, control: NC-T. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Mazak VTC 200 C

Niemcy

2002

używany

na żądanie

INNO27735

Travel X/Y/Z: 1660mm/510mm/510mm, rapid traverse X/Y/Z: 36m/min, speed: 12000rpm, spindle mount: ISO40, spindle power: 18.5kW, table spindle nose distance: 180mm-690mm, table dimensions X/Y: 2000mm/510mm, tool slots: 30, max. tool diameter: 120mm, max. tool length: 350mm, control: Mazatrol PC-Fusion-CNC 640M. Including tool length measuring device and center wall separation. Documentation available. On-site inspection is possible.

Szlifierka narzędziowa CNC

Michael Deckel S20 Turbo

Niemcy

2011

używany

na żądanie

INNO27729

Travel X/Y/Z: 340mm/240mm/240mm, max. workpiece diameter: 250mm, max. workpiece length: 500mm, speed: 3000rpm, spindle power: 7kW, machine dimensions X/Y/Z: approx. 1800mm/2000mm/2200mm, weight: approx. 2200kg, control: PMAC. Including 6-fold grinding wheel changer, chain loader S20 E for 41 workpieces and filter system Indusa ELN 1000 NS, year of manufacture: 2022. Documentation available. On-site inspection is possible.

Szlifierka narzędziowa CNC

Schütte WU 305

Niemcy

2005

używany

na żądanie

INNO27728

Axes: 5, sanding length: 330mm, max. workpiece diameter: 235mm, travel X/Y/Z: 400mm/250mm/250mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/1900mm, weight: approx. 2800kg, control: Siemens Sinumerik 840D, operating hours: approx. 22000h. Documentation available. An on-site inspection is possible.

Automatyczna piła taśmowa

Meba ECO 320 GA

Niemcy

1999

używany

na żądanie

INNO27727

Round cutting range 90°/45°/30°: 320mm/300mm/200mm, flat cutting range 90°/45°/30°: 500mm x 300mm/300mm x 300mm/200mm x 200mm, bundle tensioning range X/Y: 300mm/300mm, material infeed single/multiple: 600mm/6000mm, offcut lengths manual/automatic/automatic with bundle tensioning: approx. 70mm/120mm/270mm. Cutting speed: 70m/min, lowering speed: 300mm/min, saw blade length: 4200mm, saw blade width: 27mm, saw blade thickness: 0.9mm, saw blade tension: 45Nm. Machine dimensions X/Y/Z: approx. 2230mm/2100mm/1280mm, weight: approx. 1220kg. The machine shows a slight deformation of the cut at higher feed speeds. Documentation available. An on-site inspection is possible.

Maszyna kalandrująca

Niemcy

nieznany

używany

na żądanie

INNO27726

A calendaring machine is available. Working width: approx. 1200mm. New rollers, a new toothed belt and a new motor have been fitted to the machine. New rubberized rollers, a new motor and the air system have been installed in the haul-off. An on-site inspection is possible.

Tokarka

Boehringer VDF

Niemcy

1950

używany

na żądanie

INNO27725

Center height: 340mm, center length with tailstock: 3000mm. Including jaw chuck, faceplate, remote steady rest and rotating steady rest. On-site inspection is possible.

Szlifierka

K. Hommel Mainz

Niemcy

nieznany

używany

na żądanie

INNO27724

Center height: 400mm, center length: 3500mm. Last maintenance 5 years ago. On-site inspection is possible.

Obrotowa prasa krawędziowa

Helmut Lotze PZ 160

Niemcy

1971

używany

na żądanie

INNO27723

Working width: 3500mm, max. sheet thickness: 4mm, machine dimensions X/Y/Z: approx. 3800mm/1500mm/1900mm, weight: approx. 9000kg. The machine has a leak on the right cylinder. Documentation available. On-site inspection is possible.