Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [441 - 460 of 2444]

Prasa ekscentryczna

Ebu H75F

Niemcy

nieznany

używany

na żądanie

INNO28131

Pressing force: 750kN, throat depth: 300mm, stroke adjustment: 16mm-140mm, ram adjustment: 80mm, stroke rate: 105/min, motor power: 4kW, table dimensions X/Y: 800mm/600mm, table height: 845mm, machine dimensions X/Y/Z: approx. 1700mm/1200mm/2500mm, weight: approx. 4200kg. The machine has had a crack for years, but this does not affect the stability or the UVV test. Documentation available. On-site inspection is possible.

Klejarka

Meyer RPS L-400/RPS L-600

Niemcy

2015

używany

na żądanie

INNO28130

Two Meyer fusing machines are available for the textile industry. 1) Fusing machine Meyer RPS L-400, year of manufacture: 2015, fusing width: 400mm, connected load: 3.3kW, belt speed range: 1m-9m/min, max. pressing pressure: 50N/cm², max. temperature: 200°C, machine dimensions X/Y/Z: approx. 1700mm/900mm/450mm, weight: approx. 150kg. 2) Fusing machine Meyer RPS-L, year of manufacture: 2002, fusing width: 600mm, max. temperature: 200°C, belt speed range: 1m-9m/min, connected load: 5kW, max. pressing pressure: 35N/cm², machine dimensions X/Y/Z: approx. 1700mm/1100mm/450mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

Kontener biurowy

Niemcy

nieznany

używany

na żądanie

INNO28129

An office container is available. Internal length: 4600mm, internal width: 2900mm, area: 13.35m². An on-site inspection is possible.

Wiertarka słupowa

Donau Alpha

Niemcy

2010

używany

na żądanie

INNO28128

Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Coastone Cone 1600

Niemcy

nieznany

używany

na żądanie

INNO28127

Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible.

Obrotnica do spawania

Reinartz Thieler 300 R

Niemcy

nieznany

używany

na żądanie

INNO28126

Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible.

Szlifierka powierzchniowa

Proth PSGS-3060AH

Niemcy

1987

używany

na żądanie

INNO28125

Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Piła taśmowa

Jaespa MSP-4

Niemcy

1990

używany

na żądanie

INNO28124

A Jaespa vertical metal band saw, filing, grinding and polishing machine is available. Roller diameter: 420mm, cutting height: 280mm, cutting width: 405mm, cutting speed: 25m-280m/min, table dimensions X/Y: 600mm/600mm, table inclination left/right: 15°/45°, working height: 955mm, saw blade length range: 3200mm-3400mm, drive power: 1.5kW. Machine dimensions X/Y/Z: approx. 1250mm/1000mm/2050mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

Frezarka CNC

Hedelius C60S-1200

Niemcy

2008

używany

na żądanie

INNO28122

Traverse path X/Y/Z: 1200mm/620mm/520mm, clamping surface X/Y: 1550mm/600mm, tool holder: SK40, tool positions: 30, spindle speed: 10000rpm, spindle power: 18.5kW, rapid traverse: 45m/min, max. table load: 2000kg, machine dimensions X/Y/Z: approx. 6300mm/2600mm/3400mm, weight: approx. 10500kg, control: Heidenhain iTNC 530, control hours: 2000kg. Table load: 2000kg, machine dimensions X/Y/Z: approx. 6300mm/2600mm/3400mm, weight: approx. 10500kg, control: Heidenhain iTNC 530, control hours: 84857h, machine hours: 52336h, program hours: 19520h, spindle hours: 15928h. Documentation available. On-site inspection is possible. Expected to be available from Q1 2025.

Szlifierki do wałków CNC

Gp CNC 650

Niemcy

2012

używany

na żądanie

INNO28121

A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible.

Prasa ekscentryczna

Paul Müller/schuler/hensel ExP 25/PE 25-250/EBU 25F

Niemcy

1988

używany

na żądanie

INNO28120

Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible.

Rozdrabniacz jednowałowy

Gross GAZ 62

Niemcy

2011

używany

na żądanie

INNO28119

A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible.

Aluminiowy separator mokry

Beck Alu-Waschboy BE-AL-F1

Niemcy

2023

używany

na żądanie

INNO28116

A mobile wet extraction system Beck for the extraction and filtration of aluminum dusts and other explosive dusts is available. Suction capacity: 1600m³/h, pressure: 2500Pa, suction nozzle diameter: 200mm, motor power: 1.85kW, fan type: BN 30/28 Ex, machine dimensions X/Y/Z: approx. 1050mm/1000mm/2250mm, weight: approx. 210kg. Documentation available. On-site inspection is possible.

Nożyce do stali profilowanej

Peddinghaus 219 Super 13 G

Niemcy

1984

używany

na żądanie

INNO28115

Bending capacity: angle iron: 110mm/10mm, mitre cuts at 45°: 90mm/9mm, T-iron: 110mm/10mm, mitre cuts at 45°: 90mm/9mm, max. U- and I-steel: NP 18, drive power: 3kW. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/2100mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Piła tarczowa chłodnicza

Trennjaeger LPC 110/400

Niemcy

1979

używany

na żądanie

INNO28114

Saw blade diameter: 360mm, cutting speed: 16m-50m/min, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1500mm, weight: approx. 1000kg. Cutting range at 90°: round: 110mm, square: 110mm, rectangular: 110mm/400mm. Cutting range at 45°: round: 110mm, square: 110mm, rectangular: 110mm/280mm. Documentation available. On-site inspection is possible.

Stojak dc

Phoenix Contact Charx Power 30kW

Niemcy

nieznany

używany

na żądanie

INNO28113

A rack for DC power modules with two electrical housing units is available. Power module Phoenix Contact Charx Power 30kW, max. voltage AC/DC: 3x 530V/1000V, rated power: 30kW, efficiency: over 95%, dimensions X/Y/Z: approx. 483mm/134mm/550mm, weight: approx. 31kg. Including two electrical housing units. Documentation available. On-site inspection is possible.

Pompa odśrodkowa

Ksb UD 0603/0243144-013-41

Niemcy

2006

używany

na żądanie

INNO28112

Flow rate: 20m³/h, delivery head: 41.5m, speed: 2925rpm, power at 50Hz: 5.5kW, 400V/690V, 10.3A/6A, power at 60Hz: 6.3kW, 460V, 10.1A, efficiency class: EFF2, weight: approx. 45kg.

Optyka tnąca

Trumpf F240 D40 R265

Niemcy

nieznany

używany

na żądanie

INNO28111

Still in the original packaging, has been little used. On-site inspection is possible.

Jednostka ekstrakcyjna

Al-ko Profi-JET BG 4

Niemcy

2009

używany

na żądanie

INNO28110

Construction: Clean air chamber/fan/filter chamber/pre-separation chamber/disposal unit, Explosion pressure resistance: 200mbar, Motor power: 30kW, Nominal volume flow: 14000m³/h, Total pressure: 4700Pa. Number of filters: 128, filter length: 2500mm per filter, total filter area: 120m², filter category: BIA category C, machine dimensions X/Y/Z: approx. 4300mm/1600mm/9900mm. Including rotary valve ZRS 960, year of construction: 2009, number of blades: 7, inlet: 250mm/960mm, outlet: 208mm/960mm, motor power: 0.18kW, rotary valve speed: 4rpm, rated current: 0.8A. The frequency converter of the fan is defective. Documentation available. On-site inspection is possible.

Piec hartowniczy

Nabertherm Multitherm N7

Niemcy

1996

używany

na żądanie

INNO28108

Volume: 7l, power: 3kW, max. temperature: 1100°C, internal dimensions X/Y/Z: 230mm/250mm/120mm, external dimensions X/Y/Z: approx. 460mm/690mm/460mm, weight: approx. 65kg. Documentation available. On-site inspection is possible.