Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [381 - 400 of 2435]

Piec do wyżarzania

Herdieckerhoff STE 300/1000

Niemcy

1986

używany

na żądanie

INNO28576

A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible.

Maszyna do ciągnienia bębnów

Hesse & Jäger

Niemcy

1973

używany

na żądanie

INNO28575

A Hesse & Jäger ring tube drawing machine is available. Drum diameter: 385mm. On-site inspection is possible.

Maszyna do ciągnienia bębnów

Albert & Bergfeld

Niemcy

1988

używany

na żądanie

INNO28574

An Albert & Bergfeld ring pipe drawing machine is available. Drum diameter: 845mm. On-site inspection is possible.

Maszyna do ciągnienia bębnów

P&p 5t-Fertigzug

Niemcy

1992

używany

na żądanie

INNO28573

A P&P ring tube drawing machine is available. Finished draw-drum diameter: 600mm, power: 47.2kW, motor: Stromag, gearbox: Dempewolf. On-site inspection is possible.

Maszyna do ciągnienia bębnów

P&p 8t-Fertigzug

Niemcy

1993

używany

na żądanie

INNO28572

A P&P ring tube drawing machine is available. Finished drawing drum diameter: 600mm, power: 72kW, speed: 1000rpm, oil volume: approx. 200l, motor: Faurndau, gearbox: Keller. On-site inspection is possible.

Maszyna do ciągnienia bębnów

Malmedie EH-5

Niemcy

1980

używany

na żądanie

INNO28571

A Malmedie ring pipe drawing machine is available. Drum diameter: 570mm, operating mode: single horizontal stroke, area of application: ring pipes. On-site inspection is possible.

Piec hartowniczy

Thermconcept KM 590/13

Niemcy

2013

używany

na żądanie

INNO28570

Inner dimensions X/Y/Z: 650mm/1500mm/600mm, outer dimensions X/Y/Z: 1500mm/3000mm/2400mm, volume: 590l, output: 50kW, maximum temperature: 1280°C, weight: approx. 1450kg. The oven shows some signs of use and a few firebricks are broken. Without pneumatic cylinder. Documentation available. On-site inspection is possible.

Maszyna do cięcia laserowego CNC

Trumpf TruMatic L 3003 B

Niemcy

1992

używany

na żądanie

INNO28569

Working range X/Y: 3000mm/1500mm, laser power: 2000W (2kW), laser type: TC L 3003, positioning accuracy: +/-25mm, min. workpiece dimensions X/Y: 1000mm/1000mm, max. workpiece weight: 530kg. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Dmg Mori DMC 1035 V

Niemcy

2010

używany

na żądanie

INNO28568

Travel X/Y/Z: 1035mm/560mm/510mm, rapid traverse X/Y/Z: 25m/min, feed: 20m/min, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, spindle speed: 9000rpm, power: 13kW, torque: 83Nm, tool holder: SK40, tool positions: 20, max. tool diameter: 80mm/130mm, max. tool length: 300mm, max. tool weight: 6kg. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2500mm, weight: approx. 4100kg, control: Siemens Sinumerik 810D, operating hours: 23918h, machining hours: 11991h. Including chip conveyor, DMG EcoLine UNO 115 tool presetter, machine vices, clamping tools and various tool holders. The buffer battery is empty and may need to be replaced. Documentation available. On-site inspection is possible.

System czyszczący

Perkute FR 130

Niemcy

2006

używany

na żądanie

INNO28567

A Perkute Clean-o-mat front-loader spray cleaning system is available. Pump capacity: 7.5kW, heating capacity: 18kW, max. rotary basket load: 2000kg, max. compressed air: 10bar, empty weight: approx. 1000kg. On-site inspection is possible.

Belka dźwigowa

Tiger TA-LK

Niemcy

2014

używany

na żądanie

INNO28560

A Tiger cassette lifting beam is available. Pick-up width: 2090mm, load capacity: 2500kg, machine dimensions X/Y/Z: approx. 800mm/700mm/650mm, weight: approx. 250kg. Documentation available. On-site inspection is possible.

Dźwig portalowy

Meili B5

Niemcy

1996

używany

na żądanie

INNO28559

A gantry crane consisting of Meili Liftkat electric chain hoist (1996) and IPE carrier B5 (2018) is available. Load capacity: 1000kg, lifting speed: 10m/2.5m/min, chain: DIN 5684 - 8x22, total system dimensions X/Y/Z: approx. 10000mm/4000mm/4000mm, weight: approx. 1000kg, operating hours (estimated): approx. 600h. Documentation available. On-site inspection is possible.

Rampa załadunkowa

Butt HV 3022-6

Niemcy

2008

używany

na żądanie

INNO28558

Two Butt loading platforms are available. Length: 3000mm, width: 2000mm, max. incline/decline: 12.5%, feed: 600mm/1000mm, overall height: 700mm, load capacity: 6000kg. On-site inspection is possible.

Maszyna do formowania, wypełniania i uszczelniania

Fuji FW3710 BS/Ba7

Niemcy

2014

używany

na żądanie

INNO28556

A Fuji horizontal flow-wrapping machine with integrated shrink unit, smoking and conveying system is available. Packaging capacity: 1000 bags/min, max. film width: 600mm, infeed screw: approx. 2300mm, max. product dimensions X/Y/Z: 200mm/250mm/100mm, material: stainless steel, machine dimensions X/Y/Z: approx. 4800mm/1300mm/1500mm. Documentation available. On-site inspection is possible.

Prasa ramowa

Schafberger + Sprödhuber Bavaria

Niemcy

1996

używany

na żądanie

INNO28554

Working dimensions X/Y: 3000mm/2000mm, cylinder stroke: 1000mm, height adjustment: 2000mm-2600mm, length adjustment: 3000mm-6000mm, pressing force: 2t, space requirement: 4100mm/1000mm/2450mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

Wykrawarka z płaskim stołem

Bobst Autoplatine SPO 160-A Matic

Niemcy

1994

używany

na żądanie

INNO28550

A Bobst die-cutting machine for the corrugated board industry is available. Format dimensions X/Y: 1600mm/1100mm, min. sheet dimensions X/Y: 400mm/5200mm, die-cutting force: 400t, die-cutting speed: 6500/h, number of colors: 3, flute type: single/double. Including pressure unit Bobst Flexo 160, feeder Roda and crusher Pallmac. Documentation available. On-site inspection is possible.

Prasa do szklenia

Eder + Müller VKP-KH

Niemcy

2003

używany

na żądanie

INNO28549

A glazing press is available for mounting and fixing glass panes in window and door frames. Span: approx. 3750mm, drive type: pneumatic, operating pressure: 7bar. On-site inspection is possible.

Piła tarczowa

Eisele LMS II HVG-225

Niemcy

1980

używany

na żądanie

INNO28547

Saw blade diameter: 350mm, speed: 3400rpm, cutting capacity at 90°: 120mm/75mm, cutting capacity at 45°: 90mm/65mm, machine dimensions X/Y/Z: approx. 700mm/900mm/1000mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Szlifierka powierzchniowa

Elb-schliff SW 15 VA II

Niemcy

1985

używany

na żądanie

INNO28546

An old ELB surface grinding machine is available. Grinding length: 1500mm, grinding width: 450mm, workpiece height: 340mm, magnetic clamping plate X/Y: 1500mm/400mm, grinding wheel dimensions X/Y/Z: 300mm/50mm/76mm, grinding spindle speed: 2890rpm, max. table load: 700kg, machine weight: approx. 5000kg. The drive spindle of the machine must be replaced. Documentation available. On-site inspection is possible.

Laminator

Herbert Olbrich Beschichtungs- und Kaschiermaschine

Niemcy

2007

używany

na żądanie

INNO28545

A complete Olbrich adhesive coating and laminating line is available. Roller diameter: approx. 300mm, infeed floor height: 1000mm, outfeed floor height: 1200mm. Including drum melter and pump unit. On-site inspection is possible.