Used machines Germany - Innovac GmbH

Stretch Winder

Tosa 015

Germany

1999

used

on request

INNO28318

A Tosa winding machine is available. Machine dimensions X/Y/Z: approx. 2500mm/1500mm/2800mm. The machine produces sparks. An on-site inspection is possible.

more

Steam Boiler

Loos U-HD800

Germany

2022

used

on request

INNO28313

Two identical Loos steam boilers with dual burners (oil and gas) and other accessories are available in two stacked sea containers. Steam output: 2x 800kg/h, operating pressure: 10bar, test pressure: 18.5bar, heating surface: 14m², fuel: gas/fuel oil, feed water tank: DK2415. Including new burner motors, automatic burner controls, water pumps with spare parts, chimneys, complete piping, 2x 40-foot sea container, 1000l heating oil tank and feed water tank. With a small conversion it is possible to place the containers next to each other. Documentation available. On-site inspection is possible.

more

Water Jet Cutting Machine

Eas Duojet

Germany

2022

used

on request

INNO28312

An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible.

more

Wheel Blast Machine

Modena CM T10

Germany

2013

used

on request

INNO28311

Effective diameter: 1000mm, effective height: 450mm, max. load: 900kg, connected load: 7.34kW, turbine power: 5.5kW, impeller diameter: 334mm, throwing blades: 6, discharge speed: 30m/s-70m/s. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/3500mm, weight: approx. 2050kg, operating hours: 2559h. Documentation available. On-site inspection is possible.

more

Crushing Plant

Hosokawa Alpine A 1500 P/45-100 CL

Germany

2000

used

on request

INNO28310

A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible.

more

Differential-Way Press

Bruderer BDWP-AR14-3200.RK1E3

Germany

1992

used

on request

INNO28309

A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible.

more

CNC Lathe

Leadwell LT-25

Germany

1998

used

on request

INNO28305

Turning diameter: 450mm, turning length: 650mm, speed: 3500rpm, spindle clearance: 76.2mm, tool positions: 12, machine dimensions X/Y/Z: approx. 3800mm/1850mm/2000mm, weight: approx. 6200kg, control: Fanuc. Documentation available. On-site inspection is possible.

more

CNC Lathe

Leadwell LT-20

Germany

1997

used

on request

INNO28304

Turning diameter: 450mm, turning length: 640mm, spindle clearance: 75mm, speed: 3500rpm, spindle power: 15kW, tool positions: 12, machine dimensions X/Y/Z: approx. 3100mm/1900mm/2000mm, control: Fanuc. The machine is not ready for operation because the servo control module is defective. Documentation available. On-site inspection is possible.

more

Transport Trolley

Pefra/bauer 4000/RGP-1

Germany

2019

used

on request

INNO28303

Two heavy-duty transport trolleys are available. 1) Pefra 4000, year of construction: 2019, load capacity: 3000kg, permissible driving speed: 10km/h, permissible total weight: 4010kg, tare weight: 1010kg. 2) Bauer RGP-1, year of manufacture: 2017, load capacity: 2000kg, insertion width: 700mm, insertion pocket length: 870mm, front dimension: 1540mm, tare weight: 378kg. Documentation available. On-site inspection is possible.

more

Electric Tow Tractor

Linde P250

Germany

unknown

used

on request

INNO28302

Load capacity: 300kg, tractive force: 25000kg, operating voltage: 0V, battery capacity: 560Ah, turning radius: 2800mm, max. speed: 25km/h. Machine dimensions X/Y/Z: approx. 3000mm/1300mm/1850mm, weight without battery: approx. 3600kg, operating hours: 1804h, mileage: 13546km. Including various forks and attachments for forklift truck. Documentation available. On-site inspection is possible.

more

Stretch Winder

Tbs-pack Profi-FS-400

Germany

unknown

used

on request

INNO28301

Turntable diameter: 1600mm, load capacity: 1650kg, max. winding height: 2000mm, turning speed: 12rpm. Documentation available. On-site inspection is possible.

more

Fork Lift

Jungheinrich EFG 215/DFG 320s

Germany

2014

used

on request

INNO28300

Two Jungheinrich forklifts are available. 1) Electric forklift truck Jungheinrich EFG 215, year of manufacture: 2008, operating hours: 5416h, lifting height: 4500mm, load capacity: 1500kg. The drive axle is broken on the right. 2) Jungheinrich DFG 320s diesel forklift truck, year of manufacture: 2014, operating hours: 3480h, lift height: 4800mm, load capacity: 1800kg. A fault occurs sporadically and is rectified after a restart. Documentation available. On-site inspection is possible.

more

CNC Vertical Lathe

Danobat Danumeric TV-200/CSM

Germany

2002

used

on request

INNO28299

A Danobat CNC vertical lathe including accessories is available. Workpiece diameter: 200mm, workpiece turning diameter: 300mm, roller bearing inner diameter: 140mm, spindle inner diameter: 50mm, chuck diameter: 210mm, speed: 4700rpm. Tool positions: 8, feed X/Z: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2000mm/3000mm, control: Siemens Sinumerik 810D. Including pick-up function and pallet magazine EWAB. Documentation available. On-site inspection is possible.

more

Screw Compressor

Kaeser DS170/AS31

Germany

1998

used

on request

INNO28298

Two Kaeser compressors are available. 1) Kaeser DS 170, year of manufacture: 1998, rated power: 90kW, air volume flow: 14m³/min, max. operating pressure: 7.5bar, machine dimensions X/Y/Z: approx. 3000mm/2000mm/2200mm, weight: approx. 2800kg, load hours: 74833h, operating hours: 98982h. 2) Kaeser AS31, year of manufacture: 1998, rated power: 18.5kW, max. operating pressure: 7.5bar, air volume flow: 3.1m³/min, machine dimensions X/Y/Z: approx. 1500mm/900mm/1300mm, weight: approx. 1000kg, operating hours: 18067h. Documentation available. On-site inspection is possible.

more

CNC Lathe

Gildemeister CTX 200 S2

Germany

1999

used

on request

INNO28296

Rotation diameter over bed/slide: 440mm/210mm, turning length: 350mm, travel X/Z: 160mm/350mm, rapid traverse X/Z: 20m/30m/min, speed: 5000rpm, spindle bore: 56mm, power: 9kW, torque: 84Nm. Quill holder: MK3, quill diameter: 80mm, tailstock travel: 350mm, tool positions: 12, tool holder: VDI 20, machine dimensions X/Y/Z: approx. 3400mm/1200mm/1550mm, weight: approx. 3700kg, control: Heidenhain CNC Pilot, operating hours: 75035h. The machine displays error messages approx. twice a day, which are rectified after a restart. Documentation available. On-site inspection is possible. Expected to be available from the end of April 2025.

more

CNC Die Sinking Machine

Agie Agietron Integral 3

Germany

1997

used

on request

INNO28292

Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible.

more

Ring Wrapper

Robopac Genesis Futura XL

Germany

2016

used

on request

INNO28291

A fully automatic Robopac ring wrapping machine is available. Pallet dimensions X/Y/Z: 1900mm/1900mm/2800mm, wrapping capacity: 60 pallets/h, pre-stretch system: 150%-400%, film reel height: 500mm, max. reel diameter: 250mm, control: Siemens S7-300. Including Genesis Futura XL type 2 cord device and various accessories. Documentation available. On-site inspection is possible.

more

Radial Drilling Machine

G. Breda R 45 1210

Germany

1990

used

on request

INNO28290

Drilling capacity steel/cast iron: 45mm/55mm, spindle mount: Morse taper MK5, throat depth: 1210mm, quill stroke: 310mm, speed: 1250rpm, feed rate: 1.35mm/rev, spindle table distance min./max.: 525mm/1690mm, table dimensions X/Y: 1900mm/1100mm. Machine dimensions X/Y/Z: approx. 3000mm/1100mm/3000mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible.

more

CNC Lathe

Fat TUR 630 MN 2000

Germany

2000

used

on request

INNO28289

Turning diameter over bed/face slide: 630mm/370mm, center distance: 2000mm, bed width: 433mm, speed: 2500rpm, spindle bore: 105mm. Feed: 3200mm/min, tool holder: VDI 40, turret positions: 8, quill diameter: 90mm, motor power: 18.5kW. Machine dimensions X/Y/Z: approx. 3700mm/2200mm/1800mm, weight: approx. 4000kg, control: Siemens Sinumerik 810D Manual Turn. The control of the machine is defective. Documentation available. On-site inspection is possible.

more

Textile Machine

Müller/bibo/jagenberg/protos 63/FÜ 77 B 11/217/CMP SCA 88

Germany

1997

used

on request

INNO28288

Various machines for textile processing from different manufacturers are available. 1) Müller and Kurth 63 pinking machine. 2) Astor 86 pinking machine. 3) Bibo FP 77 B 11 cutting and punching machine, year of manufacture: 1988. 4) Jagenberg gluing machine. 5) Müller and Kurth gluing machine. 6) Müller and Kurth 217 dyeing machine. 7) Protos CMP/SCA88 embossing machine, year of manufacture: 1997, output: 1.5kW. On-site inspection is possible. Individual sale possible.

more