Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [241 - 260 of 2435]

High-Pressure PU Mixing and Metering System

Cannnon A-Compact 40FC

Germany

2017

used

on request

INNO28738

A total of five Cannon foam systems are available. Materials: isocyanates and polyol, press plate dimensions X/Y: 720mm/650mm, lid opening angle: 100°, tilt angle: 60°, opening min./max.: 312mm/502mm, parallel stroke: 190mm, approach stroke: 95mm, press stroke: 95mm, ejector stroke: 75mm, control: PLC. Including material preparation. Documentation available. On-site inspection is possible.

Industrial Oven

Memmert UF 450

Germany

2017

used

on request

INNO28737

Five identical temperature control ovens are available. Temperature: 300°C, temperature accuracy at 150°C: +/-0.5K, volume: 449l, shelf load: 30kg, total load: 300kg, internal dimensions X/Y/Z: approx. 560mm/720mm/1050mm, heating capacity: 6kW, machine dimensions X/Y/Z: approx. 710mm/900mm/1200mm. Documentation available. On-site inspection is possible.

Remaining Stock

Troma/glaser/renard

Germany

unknown

used

on request

INNO28736

Various machines and peripheral equipment for metalworking are available. 1) Troma TC 300. 2) Sigloch and Schrieder Boromat 14 4. 3) Glaser. 4) Renard DM1-R. On-site inspection is possible.

CNC Vertical Turning Machine

Diedesheim Vertifront S-70

Germany

1994

used

on request

INNO28735

Tool swing circle diameter: 1100mm, travel X/Z: 630mm/630mm, spindle bore: 66mm, flange diameter: 380mm, spindle upper edge: 960mm, headstock bearing diameter: 240mm, feed: 18m/min, rapid traverse: 10m/min, speed: 2240rpm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/3500mm, weight: approx. 14000kg, control: Siemens. Documentation available. On-site inspection is possible.

Stainless Steel Cart

Germany

unknown

used

on request

INNO28734

A total of 8 stainless steel trolleys equipped with perforated plates are available for dragees or similar products. Internal dimensions X/Y/Z: approx. 1500mm/1000mm/460mm. On-site inspection is possible.

Cutting Machine

Polar Mohr Polat 107 EL

Germany

unknown

used

on request

INNO28733

Cutting width: 1070mm, cutting height: 165mm, minimum residual cut: 32mm. On-site inspection is possible.

Shrinking Machine

Etec

Germany

unknown

used

on request

INNO28732

An ETEC shrink packaging machine for jars and tubes is available. Shrink tunnel width: 650mm, shrink tunnel height: 300mm, outfeed conveyor length: 1000mm. Including banding machine and subsequent cooling fan. On-site inspection is possible.

Tinfoil Packaging Machine

Rasch RU

Germany

1970

used

on request

INNO28731

Packaging capacity: 120 pieces/min, max. product dimensions X/Y/Z: 110mm/50mm/35mm, product diameter range: 20mm/46mm, weight: approx. 900kg. Packaging types: face fold, figure wrap, figure fold, heat seal, double twist wrap, bottom fold, envelope fold, bag fold, top twist, single twist, banding. Products: Figures, chocolate articles, chocolate lollies with a flat base, round or oval products, small bars, small bottles, truffles, balls, eggs, other rotational bodies, bath salt tablets, paraffinized cheese. Materials: All commercially available materials such as aluminum foil, laminated foil, heat-sealing foil and wax paper. Including face folding unit and unwinding station. On-site inspection is possible.

Horizontal Flow Wrapping Machine

Tevopharm Pack-6

Germany

1986

used

on request

INNO28730

Packaging capacity: 40-100 packs/min, max. packaging dimensions X/Y/Z: unlimited/115mm/50mm, max. film width: 590mm, machine dimensions X/Y/Z: approx. 3500mm/1000mm/1800mm, weight: approx. 800kg. Including infeed conveyor 2550mm/120mm with indexing, carton inserter, infeed chain approx. 2000mm and photocell Sick. Documentation available. On-site inspection is possible.

Cartoner

Mpt Mingozzi 1001

Germany

2000

used

on request

INNO28729

An MPT Mingozzi cartoner including a Robatech Concept 4/4 hot-melt gluer and a KBA Metronic inkjet printer are available. Carton dimensions X/Y/Z: 119mm-40mm/198mm, max. carton dimensions X/Y/Z: 193mm/88mm/295mm. On-site inspection is possible.

Mixing System

Vana/bauermeister/hansella/theegarten Conche/Solvomat/R-104

Germany

1991

used

on request

INNO28728

Various machines are available for mixing, dissolving and cooking. 1) Stainless steel horizontal mixer Vana Conche, year of construction: 1991, usable capacity: approx. 3000kg. 2) Stainless steel horizontal mixer Vana Conche, year of construction: 1991, usable capacity: approx. 3000kg. 3) Bauermeister recycling mixer, usable capacity: approx. 500kg. 4) Dissolving machine Hansella Solvomat 126-D, year of construction: 1963. 5) Stainless steel cooking agitator Vana, year of construction: 1969, volume: approx. 150l. 6) Stainless steel cooking agitator Vana, year of manufacture: 1969, volume: approx. 150l. 7) Stainless steel cooking agitator TheeGarten R-104, year of manufacture: 1952, volume: 150l. 8) Stainless steel cooking agitator TheeGarten R-104, year of manufacture: 1952, volume: 150l. On-site inspection is possible. Individual sale possible.

Mass Pump

Sollich/sivag SSP 1000/R65C1A

Germany

2001

used

on request

INNO28727

A total of 3 chocolate and fat mass pumps are available. 1) Sollich SSPH, year of manufacture: 1986, pumping capacity: approx. 4000kg/h. 2) Sollich SSP-1000, year of manufacture: 1959. 3) Sivag R65C1A, year of manufacture: 2001, capacity: approx. 3000kg/h. On-site inspection is possible.

Stirring Tanks

Vana/thouet/rasch SRB/RW/VD

Germany

1989

used

on request

INNO28726

A total of 15 mass agitator containers are available for chocolate and fat masses. 1-3) VANA SRB 25000, years of construction: 1987/1987/1989, usable capacity: 25000kg. 4-5) THOUET RW-3000, years of construction: 1965/1960, usable capacity: 3000kg. 6-10) RASCH VD 30, payload: 3000kg. 11-15) THOUET RW-5000, usable capacity: 5000kg. On-site inspection is possible. Individual sale possible.

Diesel Fork Lift

Jungheinrich DFG 425s

Germany

2007

used

on request

INNO28725

Fuel: diesel, drive power: 43kW, rated load capacity: 2460kg, center of gravity: 500mm, unladen weight: approx. 4000kg, operating hours: 3252h. The side cover is defective. Documentation available. On-site inspection is possible.

Cooling Tower

Evapco AT-17-4J9

Germany

2019

used

on request

INNO28724

An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible.

Filling and Screwing Machine

Alcoa 28 MCA

Germany

1997

used

on request

INNO28723

A vacuum filler for hot filling and a 4-head Alcoa capper are available. 1) Vacuum filler for hot filling, running direction: left-right, bottle formats: 1l VDF/0.5l NRW/0.33l Ale/0.75l Bordeaux, filling capacity: 5000 bottles/h. 2) 4-head capping machine Alcoa 28 MCA, year of construction: 1997, bottle formats: 0.5l NRW/1l and 0.75l Bordeaux, capping capacity: 5000 bottles/h. The two machines were part of a complete line. The capper can screw more than 5000 bottles/h, but it was limited by the filler. Both machines with complete documentation and dismantled. On-site inspection is possible. Individual purchase possible.

Injection Moulding Machine

Dr. Boy XS 100-14

Germany

2013

used

on request

INNO28722

A Boy injection molding machine is available. Clamping force: 100kN, tie bar distance (diagonal): 205mm, max. platen distance: 250mm, ejector stroke: 50mm, screw diameter: 14mm, stroke volume range: 1cm³/15.3cm³, machine dimensions X/Y/Z: approx. 1500mm/550mm/1400mm, weight: approx. 500kg, control: Procan ALPHA. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Engel ES/VC/e-Motion

Germany

2005

used

on request

INNO28721

A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible.

Plate Shear

Schröder MHSU-V 2500/3

Germany

2000

used

on request

INNO28720

Working width: 2550mm, max. sheet thickness: 3mm, cutting angle: 1.7°, stroke rate: 34/min, power: 4kW, weight: approx. 3000kg. The machine has been calibrated several times, but still has inaccuracies that cannot be rectified. Documentation available. On-site inspection is possible.

Glass Cutting Machine

Hegla Unicut AC 2314/LKB3018

Germany

2017

used

on request

INNO28719

A Hegla glass cutting machine including break-out table LKB 3018 is available. Glass flow direction: left-right, min. raw glass dimensions X/Y: 300mm/300mm, max. raw glass dimensions X/Y: 2250mm/1350mm, glass thickness range: 0.5mm/6mm, glass types: float/borosilicate and other technical glasses. Working height: 940mm (+/-25mm), operating hours: approx. 8000h. Documentation available. On-site inspection is possible.