Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [881 - 900 of 2487]

Teleskopowa platforma robocza

Haulotte STAR 10

Niemcy

2015

używany

na żądanie

INNO27331

Working height: 10m, platform height: 8m, horizontal reach: 3m, platform load capacity: 200kg, platform dimensions X/Y: 780mm/980mm, turning circle: 1880mm, wheelbase: 1200m, ground clearance: 100mm. Extension swivel range: -60°/+70°, hydraulic system capacity: 7l, climbing ability: 23%, drive speed: 5km/h, turntable rotation: 345°, tilt alarm: 3°, maximum permissible manual force/wind speed: 400N(40kg)/12.5m/s(45km/h). Dimensions X/Y/Z (folded): Approx. 2700mm/1000mm/2000mm, Weight: approx. 2800kg. Documentation available. One defect is present (in need of repair).

Centrum obróbcze CNC

Mori Seiki SH-50

Niemcy

1996

używany

na żądanie

INNO27327

Travel X/Y/Z: 630mm/600mm/650mm, table dimensions X/Y: 500mm/500mm, max. table load: 500kg, speed: 12000rpm, max. workpiece diameter/height: 730mm/700mm, feed: 16m/min, rapid traverse: 32m/min. Tool holder: BT40, tool positions: 60, max. tool diameter: 100mm, max. tool weight: 12kg, max. tool length: 360mm. Dimensions X/Y/Z: approx. 6000mm/3500mm/3500mm, weight: approx. 14000kg, control: MSC-516 MB. Documentation available.

System przenośników

Profipack Gebinde- Höhenförderer

Niemcy

2009

używany

na żądanie

INNO27326

Two identical Profipack container height conveyors are available. Capacity: 25 cycles/min for 6, 8 and 12 packs, dimensions X/Y/Z: approx. 1100mm/1000mm/4100mm.

Maszyna do formowania wtryskowego

Bettenfeld HM13000 2P

Niemcy

2003

używany

na żądanie

INNO27325

Clamping force: 13000kN, tie bar distance X/Y: 1600mm/1250mm, installation height min./max.: 650mm/1400mm, opening stroke: 1680mm, screw diameter: 100mm, stroke volume: 3900cm³, control: Unilog B4, operating hours: 44450h. Including linear robot Bettenfeld R15, Euromap, Europaket, various interfaces, various Mouldmaster and core pulls. 1x core pull valve and flat surface nozzle defective. Documentation available.

Maszyna do druku fleksograficznego CI

Printplas 1200-6CI

Niemcy

2018

używany

na żądanie

INNO27322

Number of colors: 6, film passage width: 1250mm, print width: 1200mm, print length min./max.: 300mm/900mm, max. print speed: 200m/min, dimensions X/Y: approx. 9000mm/3600mm. Including anilox rollers and Rossini impression cylinder sleeves with the required gears. Documentation available. An on-site inspection is possible.

Dmuchawa

Sig Corpoplast Blomax 12

Niemcy

2008

używany

na żądanie

INNO27319

A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible.

Hafciarka wielogłowicowa

Sewmaq SW-1208-45

Niemcy

2010

używany

na żądanie

INNO27316

A CNC 8-head embroidery machine from Sewmaq is available. Head interval: 400mm, embroidery area X/Y: 400mm/540mm, table size X/Y: 340mm/4210mm, weight: approx. 1250kg, control: BECS-316/366. On head no. 5, the slide bearing of the rotary hook is defective and must be replaced. Documentation available. On-site inspection is possible.

Maszyna do cięcia folii

Trapo

Niemcy

2020

używany

na żądanie

INNO27315

A film cutting machine with a handling portal from Trapo is available. Electrical components of the machine are available. However, the controls and the gripper of the handling portal are not available.

Centrum obróbcze CNC

Axa VSC 1

Niemcy

1988

używany

na żądanie

INNO27313

Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355.

Automatyczny system kontroli rentgenowskiej

Anritsu XR75

Niemcy

2018

używany

na żądanie

INNO27312

A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available.

Podnośnik próżniowy

Schmalz SCH500/EVE-TR 4

Niemcy

2012

używany

na żądanie

INNO27311

A crane with a vacuum lifter Schmalz is available. Vacuum pump: Speed: 3300 rpm, power requirement: 0.21 kW, pumping speed: 4.7 m³/h, suction pressure: 850 mbar. Crane: Load capacity: 200kg.

Pionowa pompa odśrodkowa

Grundfos CRN15

Niemcy

nieznany

używany

na żądanie

INNO27310

Two (2) identical Grundfos vertical centrifugal pumps are available. Nominal power: 4kW, speed: 2917rpm, max. delivery head: 56.8m, nominal delivery head: 44.8m, flow rate: 17m³/h, max. operating pressure: 25bar, operating temperature range: 25°C-120°C. On-site inspection is possible.

Prasa ekscentryczna

Schuler

Niemcy

nieznany

używany

na żądanie

INNO27308

A Schuler eccentric press and a Lux foot lever press are available. 1) Eccentric press: Stroke: 70mm, dimensions X/Y/Z: approx. 700mm/800mm/1700mm, weight: approx. 500kg. 2) Foot lever press: Lux, dimensions X/Y/Z: approx. 530mm/600mm/1450mm, weight: approx. 180kg. On-site inspection is possible.

Kanał suszący UV

Cefla Ecolight

Niemcy

1994

używany

na żądanie

INNO27306

There are 2 Cefla UV continuous dryers available. 1) Length: 3020mm, working width: 1400mm, number of lamps: 2. 2) Length: 3530mm, working width: 1400mm, number of lamps: 4. On-site inspection is possible. Available from January 2025.

Przenośnik taśmowy

Cefla Gurttransportband

Niemcy

1994

używany

na żądanie

INNO27305

Three (3) Cefla belt conveyors are available. 1) Belt length: 1850mm, belt width: 1400mm, max. belt speed: 10.7m/min. 2/3) 2x belt length: 3000mm, belt width: 1400mm, max. belt speed: 10.7m/min. On-site inspection is possible. Available from January 2025.

Zgrzewarka na gorące powietrze

Vetron Typical 5374

Niemcy

2021

używany

na żądanie

INNO27304

A Vetron Typical hot-air welding machine for continuous seam sealing is available. Heating power: 700W, max. welding speed: 12m/min, material thickness: 0.2mm/20mm, air temperature range: 20°C-600°C, air volume: 50l-450l/min, weight: approx. 50kg. Documentation available. On-site inspection is possible.

Maszyna do powlekania rolkowego

Bürkle Kombimaschine

Niemcy

nieznany

używany

na żądanie

INNO27303

A Bürkle combination roller applicator with distributor brush is available. The machine is without brushes and with application roller.

Hydrauliczny system testowy

Niehues DN200-DN600

Niemcy

2019

używany

na żądanie

INNO27302

A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000.

Jednostka ekstrakcyjna

Esta IG 24

Niemcy

2011

używany

na żądanie

INNO27301

A suction unit and cutting machine are available. Extraction unit Esta IG 24, dimensions X/Y/Z: approx. 900mm/900mm/2000mm. Cutting machine Karl Tränklein PS 1200, dimensions X/Y/Z: approx. 1000mm/1000mm/750mm. On-site inspection is possible.

Śrutownica

Rösler ST 1400 PS

Niemcy

2008

używany

na żądanie

INNO27300

Blast chamber dimensions X/Y/Z: 1390mm/1070mm/740mm, blast gun: SPD 38, blast nozzle diameter- 8mm-14mm, blast nozzle air requirement (3bar): 115m³-335m³/h, pressure vessel volume: 25l, dedusting capacity: 1000m³/h, dimensions X/Y/Z: approx. 2000mm/2900mm/2600mm. Documentation available.