Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1 - 20 of 2496]

Motor

Sew-eurodrive K157 DRS225S4

Germany

unknown

used

on request

INNO28485

Four identical SEW-Eurodrive motors are available. Gearbox type: bevel gearbox, torque: 16900Nm, speed: 1475/21, motor output: 37kW, efficiency: 91.6%, Cos: 0.82, insulation class: F, oil type: CLP HC 220, oil volume: 90l, weight: 1004kg. On-site inspection is possible.

Thermal Fume Incineration Plant

Koenig & Bauer Metalprint

Germany

1999

used

on request

INNO28484

A complete LTG Mailänder (now Koenig & Bauer) thermal exhaust air incineration plant is available. Exhaust air volume: 20000Nm³/h, max. solvent volume: 1.5g/m³, max. combustion chamber temperature: 850°C, fuel: natural gas, calorific value: 10kWh/m³, connected load: 45kW, solvent filter capacity: 30kg/h. Documentation available. On-site inspection is possible.

Stack Press

Columbus C-S S-Variomat Tandem

Germany

1998

used

on request

INNO28483

Number of levels: 4, pressure beam: 4/level, hold-down device: 4/level, pressing length: 2000mm, pressing width: 1040mm, max. workpiece thickness: 80mm, total pressing pressure: 12t, effective depth: approx. 980mm, distance between outer edge uprights and outer edge uprights: 1940mm, machine dimensions X/Y/Z: approx. 2400mm/1700mm/2100mm. On-site inspection is possible.

Cut-Off Saw

Fom Panda Echo

Germany

1998

used

on request

INNO28482

A mitre saw FOM is available. Saw blade diameter: 300mm, motor power: 1.47kW, saw blade support shaft: 32mm, machine dimensions X/Y/Z: approx. 650mm/800mm/1300mm, weight: approx. 170kg. Including pneumatic clamping jaws, fence with 2x measuring rulers and saw blade replacement tool. Documentation available. On-site inspection is possible.

Dissolver

Vma Getzmann Torusmill 100 CH EX

Germany

2007

used

on request

INNO28481

A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible.

Bag Forming, Filling and Sealing Machine

Laudenberg FBM 22

Germany

2009

used

on request

INNO28480

Roll width: 500mm, bag dimensions X/Y: 250mm/159mm, packaging capacity: 2 bags/cycle, filling weight range: 200g-250g, cycles: 50, control: Siemens Simatic S7-300, machine dimensions X/Y/Z: approx. 5800mm/2000mm/2300mm. Documentation available. On-site inspection is possible.

Bag Making Machine

Honsel & Co. 722

Germany

unknown

used

on request

INNO28479

A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder. The machine is partially dismantled. Toothed belts must be tensioned and partially replaced. Toothed belt wheels are disassembled and must be installed. On-site inspection is possible.

Bag Making Machine

Honsel & Co. 722

Germany

unknown

used

on request

INNO28478

A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder, folding table and deposit table with counter and feed. On-site inspection is possible.

Flat Bag Machine

Honsel & Co./pcm Krause P44

Germany

2003

used

on request

INNO28477

A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible.

Bag Making Machine

Seydel

Germany

1994

used

on request

INNO28476

A bag making machine (packaging machine for industrial bags) Seydel is available. Working width: 1020mm, wrapping closure: one-sided/both-sided. Including cardboard flange feeder and deposit table with counter and advance. On-site inspection is possible.

Flexographic Printing Unit

Garant Triumph 3 S1290

Germany

1970

used

on request

INNO28475

A Garant block bottom machine (attachment printing unit for flexographic printing) is available. Production width range: 80mm-260mm, production length range: 280mm-920mm. Including extensive accessories for format changeover. Documentation available. On-site inspection is possible.

High Speed Shaping Machine

Klopp 550

Germany

1983

used

on request

INNO28474

Plane length: 550mm, plane width: 500mm, ram table distance: 450mm, tool holder vertical movement: 140mm, table dimensions X/Y: 500mm/315mm, stroke speed: 160 strokes/min, table feed: 4mm/stroke, machine dimensions X/Y/Z: 2000mm/1300mm/1400mm, weight: approx. 1250kg.

Boiler

Viessmann SX1

Germany

unknown

used

on request

INNO28473

Heat output: 225kW, water volume: 399l, operating overpressure: 4bar, flow temperature: 120°C, heating medium: natural gas. On-site inspection is possible.

CNC Double Spindle Lathe

Doosan QL300H

Germany

2005

used

on request

INNO28472

Spindle distance: 500mm, turning diameter: 2200mm/50mm, turning length: 100mm/140mm, bar capacity: 64mm, spindle bore: 77mm, speed: 3500rpm, torque: 395Nm, bearing diameter: 120mm. Travel X/Z: 210mm/230mm, rapid traverse X/Z: 24m/min. Turret: 2, turret type: V10, tool positions: 2x10, boring bar diameter: 50mm, tool dimensions: 25x25mm/40mm. Machine dimensions X/Y/Z: approx. 5400mm/2600mm/3900mm, weight: approx. 9000kg, control: Fanuc F18iTB. Including 3-axis gantry loader and loading magazine. One circuit board of the machine must be replaced. Documentation available. On-site inspection is possible.

CNC Double Spindle Lathe

Muratec MW 200

Germany

2011

used

on request

INNO28471

Turning diameter: 350mm, turning length: 170mm, spindle center distance: 440mm, travel X/Z: 190mm/170mm, rapid traverse X/Z: 24m/min. Spindle: 2, spindle power: 22kW, max. chuck protection: 10 inch, spindle bore: 63mm, speed: 3500rpm, front bearing inner diameter: 110mm, spindle mount: JIS A2-7. Tool turret: 2, tool positions: 2x10, shank height: 25mm, shank diameter: 40mm. Machine dimensions X/Y/Z: approx. 2400mm/2200mm/3100mm, weight: approx. 7200kg, control: Fanuc 32i-A. Including 3-axis gantry loader, transformer and workpiece magazine WF14L-280II. Documentation available. On-site inspection is possible.

CNC EDM-Machine

Agie AgieCut Progress V3

Germany

2004

used

on request

INNO28470

Working range X/Y/Z: 500mm/350mm/426mm, U-axis: +/-30°, V-axis: +/-70mm, resolution: 0.0001mm, positioning speed: 3m/min, tolerance for new machine: 4µm. Workpiece dimensions X/Y/Z: 1050mm/650mm/420mm, max. workpiece weight with/without bath: 400kg/800kg, wire diameter range: 0.2mm-0.33mm, wire speed: 60m-300m/min, weight: approx. 4000kg, control: AgieVision 5. Including a mobile electronic manual control unit with AgieJogger, DA Progress integrated dielectrum unit, 65A generator and wire threading device. Documentation available. On-site inspection is possible.

Console Milling Machine

Reckermann 1000 Kombi

Germany

1996

used

on request

INNO28469

A Reckermann CNC console milling machine is available. Travel X/Y/Z: 1000mm/350mm/450mm, vertical spindle table distance: 550mm, feed X/Y/Z: 1000mm/1000mm/400mm/min, rapid traverse X/Y/Z: 5m/5m/2m/min, power: 7.4kW, speed: 2100rpm, tool holder: ISO40, table dimensions X/Y: 1370mm/400mm, max. workpiece weight: 500kg. Transport dimensions X/Y/Z: approx. 1900mm/2500mm/2200mm, weight: approx. 4000kg. On-site inspection is possible.

CNC Laser Cutting Machine

Bystronic ByStar 4,4kW/ByLaser 4400

Germany

2007

used

on request

INNO28468

A CNC CO2 laser cutting machine Bystronic is available. Laser medium: CO2, wavelength: 10800µm, laser diameter: 20mm, laser power: 4400W (4.4kW), working range X/Y/Z: 4000mm/2000mm/1700mm, max. material thickness: 25mm/20mm/12mm, max. workpiece weight: 1600kg, simultaneous positioning speed: 113m/min. Machine dimensions X/Y/Z: approx. 16000mm/6700mm/2100mm, weight: approx. 20000kg, control: Bystronic ByVision. Documentation available. On-site inspection is possible.

Hydraulic Aggregate

Hydropa WE 10 HG-F4M/QX 10

Germany

2005

used

on request

INNO28467

Pump type: QX 31-020/21-016/21-012 R, power: 5.5kW, flow rate: 29l+23l+18l/min, max. pressure: 3x40bar, oil viscosity: 32-46cSt, usable volume: 300l. On-site inspection is possible.

Motor

Siemens 1LA7562/OR288I

Germany

1990

used

on request

INNO28466

Two Siemens motors are available. 1) Siemens 1LA7562-6HE60-Z, type: three-phase asynchronous motor with squirrel-cage rotor, voltage: 6000V, current: 49A, power: 400kW, operating mode: S1, power factor: 0.83, speed: 988rpm, thermal class: F, cooling type: IC 511, design: IM B3, machine dimensions X/Y/Z: approx. 2000mm/1200mm/1200mm, weight: approx. 3700kg. 2) Siemens OR-288I-6B, voltage: 6000V, power: 400kW, power factor: 0.87, speed: 985rpm, thermal class: F, design: IM B3, weight: approx. 4300kg. On-site inspection is possible.