Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [1941 - 1960 of 2725]

Reach Truck

Jungheinrich ETV 214

Germany

2003

used

on request

INNO27228

Load capacity: 1400kg, total width: 1270mm, overall height: 3300mm, tires: polyurethane, load center: 600mm, voltage: 48V, traction motor power: 6kW, tare weight: 2736kg, battery weight: 750kg, lifting height: 10.25m, turning radius: 1613mm, travel speed: 14km/h, operating hours: 13573h. Charger included. Documentation available.

Injection Moulding Machine

Boy 55M

Germany

2005

used

on request

INNO27212

There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included.

Milling Machine

Steinel BZ20

Germany

1982

used

on request

INNO27209

Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier.

CNC Cycle Lathe

Wagner WDE 360

Germany

2014

used

on request

INNO27207

Travel X/Y: 230mm/870mm, speed: 3000rpm, max. spindle bore 52mm, max. turning diameter over bed/face slide: 360mm/180mm, max. workpiece length: 870mm, bed width: 1000mm, max. tailstock stroke: 130mm, max. quill diameter: 63mm. Dimensions X/Y/Z: approx. 2500mm/1700mm/2000mm, weight: approx. 1600kg. Documentation available.

Deep Hole Drilling Machine

Tbt T30-1000 KTN/NC

Germany

unknown

used

on request

INNO27205

Travel X/Y/Z: 700mm/300mm/1000mm, rapid traverse X/Y/Z: 4000mm/4000mm/2000mm /min, drilling method: ELB, number of drilling spindles: 1, min./max. drilling diameter: 4mm/30mm, max. drilling depth: 1000mm, table dimensions X/Y: approx. 850mm/750mm.

Deep Hole Drilling Machine

Tbt T10-500

Germany

unknown

used

on request

INNO27204

Drilling diameter: 2mm-10mm, max. drilling depth: 500mm, drilling method: ELB, speed: 8000rpm. Dimensions X/Y/Z: approx. 2300mm/1300mm/1600mm, weight: approx. 2000kg. Including cooling with automatic filter and magnetic chip conveyor.

CNC Vertical Machining Center

Mazak AJV 60/120

Germany

1990

used

on request

INNO27196

Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible.

CNC Milling Machine

Mazak FH 880

Germany

1997

used

on request

INNO27195

Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible.

Row Drilling Machine

Elu S156

Germany

1976

used

on request

INNO14814

Number of drilling heads: 4.

Injection Moulding Machine

Arburg 221/55-250

Germany

1979

used

on request

INNO27186

Clamping force: 25kN, injection force: 5.7kN, screw motor: 12Nm, heating: 3.4kW.

CNC Lathe

Monforts RNC 200 A

Germany

2000

used

on request

INNO27182

Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available.

Wire Drawing Plant

Koch KHZ 5000

Germany

1993

used

on request

INNO27180

A wire drawing unit is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 5000, year of manufacture: 1993, number of draws per block: 1, drawing drum diameter: 700mm, drawing force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of construction: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Including hydraulic unit G13 AK. Documentation available.

Tube Furnace

Thermconcept ROHT 50/200/17

Germany

2018

used

on request

INNO27169

A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available.

Tube Furnace

Thermconcept ROK 70/500/11

Germany

2023

used

on request

INNO27168

A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available.

Mixing Vessel

Hermann Rothenburg Rühr- und Mischkessel

Germany

1976

used

on request

INNO27157

A Hermann Rothenburg stirring and mixing vessel is available. Operating pressure vessel/jacket: 2bar/0.5bar, volume vessel/jacket: 1000l/180l, max. temperature vessel/jacket: 180°C/180°C. On-site inspection is possible.

Storage Tank

Tuchenhagen

Germany

unknown

used

on request

INNO27140

Various heating oil, VA containers and VA tanks are available. 1) Vertical VA tank with 5 feet, volume: 40m³, diameter: approx. 2500mm, height: approx. 6000mm. 2) Vertical VA tank with 5 feet, volume: 25m³, diameter: approx. 2500mm, height: approx. 4000mm. 3) Vertical VA tank with 5 feet, volume: 35m³, diameter: approx. 3000mm, height: approx. 5000mm. 4/5) Two double-walled VA tanks, volume: 50m³, diameter: approx. 3800mm, height: approx. 5500mm. Including agitator. 6) Transport tank mounted on container frame with 3 separate chambers, chamber volume: 4m³, total volume: 12m³, drain: central, cleaning: via spray heads. 7) Heating oil tank, volume: 30m³, diameter: approx. 2500mm, length: approx. 8000mm. 8) Heating oil tank, volume: 10m³, diameter: approx. 2000mm, length: approx. 4000mm. A further 7 (8-14) partly mobile V2A tanks with volumes from 1m³ to 11m³. A further 5 built-in VA sheet metal storage tanks, each with a volume of 20m³. Documentation available. On-site inspection is possible.

Combined Heat and Power Plant

Man/daimler Benz/krauter 12 Zylinder/8 Zylinder

Germany

unknown

used

on request

INNO27139

A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabinets. All generators are installed in containers and are therefore easy to transport.

Bottle Washing System

Klinger/hager+elsässer Euro Class-D 20/1/73

Germany

2000

used

on request

INNO27138

A complete bottle rinsing system with Klinger bottle rinsing machine, Hager + Elsässer drinking water treatment system and Ro reverse osmosis system is available. 1) Bottle washer Klinger Euro Class-D 20/1/73, year of construction: 2000, capacity: 9600 bottles/h, cycle time: 7.5s, cycle time: 12.63min, bottles per row: 20, number of rows: 107, max. bottles in the machine: 2020, water consumption: 3.8m³/h, tank volume soft caustic/post-caustic: 5600l/740l. Dimensions X/Y/Z: approx. 8000mm/3400mm/2800mm, weight: approx. 16000kg, control system: Siemens S7. 2) Drinking water treatment plant Hager +Elsässer consisting of cation and anion exchanger, capacity: 5m³/h. Including salt tank, pre-filter and UV sonde. 3) RO reverse osmosis system, full desalination capacity: 2.5m³/h. Documentation available. On-site inspection is possible.

Double-End Profiler

Schwabedissen DAZSa 23

Germany

1952

used

on request

INNO27136

A Schwabedissen DAZSa23 double-end profiler is available. Working width min./max.: 400mm/1250mm, chain track-cam distance: approx. 405mm, external dimensions at max. working width: approx. 3100mm/2800mm. The machine has 4 swivel motors on each side. On-site inspection is possible.

Temperature Control Device

Regloplas P140Smart/90Smart

Germany

2020

used

on request

INNO27126

Four Regloplast Smart series temperature control units are available. 3x Regloplast 90Smart, year of manufacture: 2018/2018/2016, T. max.: 90°C, dimensions X/Y/Z: approx. 200mm/560mm/600mm, weight: approx. 50kg, some float switches and display defective. 1x Regloplast P140Smart, year of manufacture: 2020, T.max.: 140°C, dimensions X/Y/Z: approx. 200mm/560mm/600mm, weight: approx. 50kg. Documentation available. On-site inspection is possible.