Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [941 - 960 of 2457]

Injection Moulding Machine

Netstal Synergy S-3500-1700

Germany

1997

used

on request

INNO27770

Operating pressure: 210bar, injection force: 693kN, clamping force: 3500kN, opening stroke: 700mm, mold installation height: 600mm-950mm, power: 118kW, operating hours: 176,533h, cycles: 1,569,030. documentation available. On-site inspection is possible.

Refrigerant Dryer

Kaeser TD 76

Germany

2019

used

on request

INNO27768

Three identical Kaeser refrigeration dryers are available. Volume flow: 8.25m³/min, operating pressure: 16bar, air inlet: 3°C-55°C, ambient temperature: 3°C-45°C, coolant: R-513A, coolant volume: 1.5kg, machine dimensions X/Y/Z: approx. 800mm/1200mm/1200mm, weight: approx. 250kg. The copper parts of the machines have been attacked (spare parts carrier or in need of repair). Documentation available.

Industrial Vacuum Cleaner

Ringler RI 331/131 D4/D3

Germany

2015

used

on request

INNO27765

Two Ringler industrial vacuum cleaners are available. 1) Ringler RI 331 D4 industrial vacuum cleaner, year of manufacture: 2015, power: 4kW, air flow: 520Nm³/h, max. vacuum: 26kPa, container volume: approx. 60l, machine dimensions X/Y/Z: approx. 800mm/700mm/1600mm, weight: approx. 150kg. 2) Industrial vacuum cleaner Ringler RI 131 D3, year of construction: 2011, power: 3kW, max. negative pressure: 32kPa, max. air flow rate: 32Nm³/h, machine dimensions X/Y/Z: approx. 860mm/670mm/1565mm, weight: approx. 130kg. Documentation is available. On-site inspection is possible.

Eccentric Press

Ruhrmann EVR 125

Germany

unknown

used

on request

INNO27764

Pressing force: 1250kN, stroke rate: 55/min, max. switching frequency: 50/min, ram stroke: 8mm-120mm, ram adjustment: 80mm, power: 7.5kW, safety clearance: 340mm, weight: approx. 8700kg. The machine has a hairline crack on the main shaft. On-site inspection is possible.

End Milling Machine

Mla M 12

Germany

2006

used

on request

INNO27761

Power: 1.5kW, materials: plastic/aluminum, intended use: welding and machining processes, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1800mm, weight: approx. 150kg. Including accessories. On-site inspection is possible.

Industrial Blower

Claudius Peters GMB15.11

Germany

1980

used

on request

INNO27760

Two identical Claudius Peters industrial blowers are available. Power: 97.2kW, speed: 1680rpm, flow rate: 58.2m³/min, pressure: 1bar, secondary pressure: 0.8bar, pressure difference: 800mbar. On-site inspection is possible.

Recirculating Cooling Tower

Karlsruhe (gohl-ktk) K 18-28-3

Germany

2002

used

on request

INNO27759

Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

Transformer Double Substation

Scheidt/abb/areva BEK250/420

Germany

2007

used

on request

INNO27753

A two-part Sheidt transformer station with two transformers is available. Rated power per transformer: 630kVA. Documentation available. On-site inspection is possible.

Transformer Substation

Gräper GA 450/330

Germany

1994

used

on request

INNO27752

Transformer Heim, rated power: 400kVA, primary voltage: 10kV, insulation medium: oil-cooled, switchgear: medium voltage, cooling type: ONAN, cable connections: Medium voltage/low voltage, Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3500mm, Weight: approx. 15000kg-20000kg. Documentation available. On-site inspection is possible.

Shredder

Rapid 8045-KU

Germany

1994

used

on request

INNO27751

Motor power: 37kW, rotor diameter: 500mm, rotor width: 790mm, cross-section: approx. 500mm/790mm, stator blades: 2-row, rotor: 6 blades left and right. Including cyclone, pipes, blower, 3 sets of knives and sieves with a diameter of 6mm/8mm/10mm. Grinding capacity: 6 sieve: 150kg/h, 8 sieve: 300kg/h, 10 sieve: 400kg/h. Documentation available. On-site inspection is possible.

Coating System

Dage Prima V7

Germany

2013

used

on request

INNO27750

Basket dimensions X/Y/Z: 300mm/250mm/200mm, bath capacity: 52l/80kg, European card throughput: approx. 280/h, machine dimensions X/Y/Z: approx. 1000mm/750mm/1050mm. Including automatic drain, fill level monitoring, cooling zone, collection container for water/solvent: 0.5l/5l. Inspection of the cooling system is necessary. Documentation available. On-site inspection is possible. Expected to be available from mid-October 2024.

Lathe

Weipert W500

Germany

1972

used

on request

INNO27749

Rotation diameter over bed: 530mm, turning length: 800mm, center distance: 1000mm, bore: 63mm, max. quill adjustment: 225mm, speed: 900rpm, spindle power: 15kW. Machine dimensions X/Y/Z: approx. 2700mm/1400mm/1300mm, weight: approx. 3300kg. Documentation available. On-site inspection is possible.

Lathe

Schaerer UD 500

Germany

1965

used

on request

INNO27748

Swing diameter over bed/face slide: 520mm/310mm, max. center distance: 3000mm, spindle bore: 62mm, taper diameter: 70mm, three-jaw chuck clamps up to: 315mm, wheel width: 68mm, wheel diameter: 168mm/200mm, spindle power: 20kW, machine dimensions X/Y/Z: approx. 5000mm/1300mm/1300mm, weight: approx. 4000kg. The lathe has been converted for knurling, so normal turning work is not possible. Documentation available. On-site inspection is possible.

Welding Robot Cell

Reis TYPRV20-16-RSVI

Germany

2015

used

on request

INNO27746

Welding robot: RV20-16 with turntable, welding source: Merkle High Pulse 551 RS, positioner: integrated welding positioner, cabin equipment: double station with high-speed doors, welding type: MIG/MAG welding. Machine dimensions X/Y/Z: approx. 3800mm/2400mm/2200mm, weight: approx. 3750kg. Including all available tools, spare parts and accessories. Documentation available. On-site inspection is possible.

Injection Moulding Machine

Krauss Maffei KM 110-380 CX

Germany

2011

used

on request

INNO27745

Clamping force: 1100kN, tie bar clearance: 470mm/470mm, opening stroke: 1000mm, min. mold installation height: 300mm, screw diameter: 40mm, specific injection pressure: 1860bar, max. stroke volume: 201cm³, connected load: 30kW, control: MC5. Machine dimensions: 4600mm/2650mm/2250mm, machine weight: 8t, operating hours: 57,020h. Available from December 2024, including special accessories, Krauss Maffei LRX 100, 6x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, separator flap, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available.

Injection Moulding Machine

Krauss Maffei KM 250-1400 C1

Germany

2002

used

on request

INNO27744

Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available.

Cold Press

Dr. Fritsch KP 35

Germany

2000

used

on request

INNO27741

A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Barrel

Germany

unknown

used

on request

INNO27739

A total of 32 barrels are available. Individual barrel volume: 200l. The condition of the barrels is rinsed, there are no residues. On-site inspection is possible by arrangement.

Vacuum Forming Machine

Geiss DU 2400 x 1200 T9

Germany

2011

used

on request

INNO27738

Max. mold dimensions X/Y: 2400mm/1200mm, max. plate dimensions X/Y: 2350mm/1150mm, max. mold installation height: 900mm, total connected load: 285.3kW, rated operating current: 413A, heating capacity top + bottom: 277.7kW, air consumption: 1600l/cycle. Machine dimensions X/Y/Z: approx. 4500mm/4700mm/4700mm, weight: approx. 12500kg, control: Siemens with OP 35, documentation available. On-site inspection is possible.

CNC Lathe

Mazak SQT 25 MS

Germany

1999

used

on request

INNO27737

Turning diameter: 300mm, turning diameter: 525mm, turning length: 550mm, spindle bore: 76mm, max. bar diameter: 64mm, max. chuck diameter: 250mm. Spindle speed: 4000rpm, spindle power: 22kW, max. spindle torque: 351Nm, spindle nose-turret face distance: 115mm-690mm. Tool slots: 12, shank diameter: 25mm, drill shank diameter: 40mm, max. turret indexing time: 0.2s-0.6s. Traverse path X/Z/counter spindle: 190mm/575mm/585mm, rapid traverse X/Z: 30m/min, rapid traverse C: 400rpm, rapid traverse B: 18m/min, C-axis swivel: 360°. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2500mm, weight: approx. 6000kg, control: PC Fusion CNC 640T, operating hours: approx. 5000h. Without bar loader, Rotaryscale defective. Documentation available. On-site inspection is possible.