Used machines Germany - Innovac GmbH

Eccentric Press

Bihler GRM 50

Germany

unknown

used

on request

INNO28020

Stroke rate: 250/min, press force: 250kN, stroke: 16mm. Including press with 2 slides, reel, welding device with cooling unit and automatic nut feeder. Documentation available. On-site inspection is possible.

more

CNC Laser Cutting Machine

Trumpf TLC 1050

Germany

2000

used

on request

INNO28019

Laser power: 4kW (4000W), travel X/Y/Z: 4000mm/1500mm/500mm, C-axis: 360°, table dimensions X/Y: 3000mm/1500mm, connected load: 90kVA, machine dimensions X/Y/Z: approx. 9000mm/5000mm/3000mm, weight: approx. 10000kg, laser hours: 34879h. The resonator is defective. Documentation available. On-site inspection is possible.

more

CNC Tool Grinding Machine

Smp Numaffut CA6

Germany

2001

used

on request

INNO28009

A CNC 5-axis grinding machine SMP is available. Grinding wheel diameter: 200mm, max. tool diameter: 150mm, max. tool length manual/automatic: 300mm/140mm, max. workpiece weight: 25kg, spindle speed: 20000rpm, spindle power: 7kW, interchangeable magazine: 4 places. Documentation available. On-site inspection is possible.

more

Pick-And-Place Machine

Mechatronika M10V

Germany

2013

used

on request

INNO28008

A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible.

more

UV Dryer

Esc special

Germany

2005

used

on request

INNO28007

Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible.

more

Injection Moulding Machine

Engel

Germany

2009

used

on request

INNO28006

There are 5 identical Engel injection molding machines available. Screw diameter: 2x 30mm/3x 35mm, clamping force: 80t, weight: approx. 4400kg. All machines including attachment crane. One Engel (Fig. 5) serves as a spare parts dispenser for the remaining 4 machines. Documentation available. On-site inspection is possible.

more

Slitting and Winding System

Calator/weiss/bastian SEM-SRE

Germany

1988

used

on request

INNO28005

A textile cutting and winding system consisting of several individual machines is available. The machine sews tubular bales together, cuts and rolls them into large rolls (bobbins). Working width for elastic/non-elastic fabrics: 1860mm/2400mm, shear width: 980mm, production capacity: 200kg/h, tubular bale weight: approx. 30kg, large roll weight range: 300kg-500kg, roll width: 1780mm, roll width: 2700mm, current fabric web width: 1700mm, total system dimensions X/Y/Z: approx. 5200mm/4000mm/5200mm, total system weight: approx. 3000kg. On-site inspection is possible.

more

CNC Machining Center

Hurco VMX 50

Germany

2006

used

on request

INNO28004

Travel X/Y/Z: 1270mm/660mm/610mm, speed: 10000rpm, max. table load: 3000kg, spindle mount: CAT40, tool positions: 40, machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, weight: approx. 9000kg, control: Ultimax. Documentation available. On-site inspection is possible.

more

Robot Cell

Stäubli TX200

Germany

2009

used

on request

INNO28003

A Stäubli robot cell with controller and all components is available. Axes: 6, robot type: articulated arm robot, max. reach: 2594mm, max. payload: 130kg, repeat accuracy at the tool center point (TCP): +/-0.06mm, robot weight: approx. 1000kg. Including CS8CHP controller, teach pendant and control cabinet. Documentation available. On-site inspection is possible.

more

Upright Drilling Machine

Webo GRADUA 60

Germany

1973

used

on request

INNO28002

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

more

Gas Turbine

Opra OP16-3B

Germany

2012

used

on request

INNO28001

A complete system consisting of generator, turbine, gearbox, housing, exhaust gas duct and stack is available. 1) Gas turbine: Nominal output at ISO conditions: 1850kWe, fuel: natural gas, calorific value (LHV): 38.8MJ/kg, mass flow rate: 8.7kg/s, max. exhaust gas temperature: 571°C, max. exhaust gas flow: 221kg/s, turbine speed: 26000rpm, operating hours: approx. 20000h. 2) Generator: Type: Synchronous generator LSA 53 VL80/4p, rated power: 2316kVA/10.5kV, 127A, speed: 1500rpm. 3) Gearbox: Type: 2-stage planetary system GB24-1500, transmission ratio: 6.7:1, weight: approx. 350kg. Total system operating hours: 81269h. Documentation available. On-site inspection is possible.

more

Continuous Baking Oven

Silex DB SF-410/1150

Germany

2010

used

on request

INNO28000

A Silex continuous baking and deep-frying oven is available. Production capacity: approx. 1000 portions/h, processes: frying/baking, output: 20kW, machine dimensions X/Y/Z: approx. 4100mm/1200mm/1700mm, weight: approx. 900kg. Documentation available. On-site inspection is possible.

more

CNC Machining Center

Stama MC 726 MT

Germany

2006

used

on request

INNO27999

A CNC 5-axis vertical machining center Stama is available. Travel X/Y/Z: 800mm/400mm/350mm, speed: 12,000 rpm, spindle power: 30kW, spindle holder: HSK-63, tool positions: 42, max. workpiece weight: 180kg. Machine dimensions X/Y/Z: approx. 3900mm/3500mm/3300mm, weight: approx. 6600kg, control: Siemens 840D, operating hours: 33,813h. Including measuring probe, bar loader, cooling and filter system. Documentation available. On-site inspection is possible.

more

Continuous Cleaning Machine

Franke DRB-300/100/5000 III-RST

Germany

2006

used

on request

INNO27997

A continuous spray cleaning system F/R/A/N/K/E is available. Cleaning tank volume: 800l, rinsing tank volume: 400l, recommended temperature cleaning/rinsing: 60°C/65°C, heating capacity cleaning/rinsing/drying: 27kW/12kW/9kW, max. temperature cleaning/rinsing/drying: 80°C/80°C/120°C, filter fineness cleaning/rinsing: 1mm/1mm, connected load: 56kW. Including an oil separator plate phase separator (PPT). Documentation available. On-site inspection is possible.

more

Mobile Crane

Demag LK 910/483-V

Germany

1972

used

on request

INNO27996

Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible.

more

Electric Pedestrian Forklift Truck

Genkinger EGG 20/31 I

Germany

2019

used

on request

INNO27994

Load dimensions: 1200x800mm, max. load capacity: 2t, fork lift: 46-3120mm, fork tine dimensions: 1000x100x40mm, travel speed: 5km/h, motor power: 2kW, length: 2930mm, width: 940mm, operational hours counter: 41h. With documentation, no defects known, an on-site inspection is possible.

more

Remaining Stock Assembly Line

Rna/sortimat/asba/intec/maximator/tox/videojet/bihler Model 1510/DUO-5-PN-K/BB50/ET180

Germany

unknown

used

on request

INNO27993

After the closure of an assembly line, various accessories, spare parts and individual small used machines are available. 30+ drives for RNA, Sortimat, ASBA, OKU and Lanco reversible conveyors. 6x Intec BB50 belt hoppers. 4x hydraulic units Maximator and Hawe. 4x Schling Duo-5-PN-K toggle presses. 5x TOX EL 15.30 power packs. 8x linear conveyors with swing arm and left-hand grid. 4x Bihler ET 130.0.G-1000/4 welding transformers. 6x VideoJet Model 1510 inkjet printers. Documentation available. On-site inspection is possible.

more

Injection Moulding Machine

Battenfeld TM 4500/3300

Germany

2004

used

on request

INNO27992

Screw diameter: 85mm, injection pressure: 1625bar, stroke volume: 2128cm³, injection weight: 1936g, plasticizing flow: 93g/s. Clamping platen dimensions X/Y: 1120mm/1120mm, max. clamping force: 4500kN, tie bar distance: 800mm/800mm, mold installation height min./max.: 300mm/770mm, opening stroke: 760mm, clamping platen distance: 1530mm, clamping force: 4950kN, tie bar diameter: 125mm, ejector force: 80kN, ejector stroke: 250mm, operating hours: 82550h. Radial motor is defective. Documentation available. On-site inspection is possible.

more

Chiller

Klimat/hiref RFS 18/LCE124FL

Germany

2010

used

on request

INNO27991

Two chillers are available. 1) Klimat S.p.A. RF/S 18, year of manufacture: 1997, compressor: H2NG094, coolant: R22, coolant quantity: 6.5kg, oil: Zerol 150T, oil quantity: 2.55kg, max. water pressure: 3bar, cooling capacity: 20kW, machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 400kg. 2) HiRef LCE124FL, year of manufacture: 2010, max. operating pressure: 40.5bar, ambient temperature min./max.: -10°C/45°C, coolant: R410A, cooling capacity: 45kW, machine weight: approx. 2000kg. Documentation available. On-site inspection is possible.

more

Dosing System

Velcorin II G B5 MID 50 C/VDT 50 L

Germany

2007

used

on request

INNO27990

Two Velcorin cold sterilization systems for the bevarage industry are available. 1) Velcorin II G B5 MID 50 C, year of manufacture: 2007, min./max. flow rate: 7000l/23000l/h, recommended min. beverage quantity for high dosing accuracy: 85l/h, max. directional flow rate: 504hl/h, dosing pump type: MTV 2.13/17, dosing accuracy: 20ml Velcorin/hl, sterilizing agent: dimethyl dicarbonate (DMDC, E242). Max. Beverage line pressure: 6.5bar, max. beverage line temperature: 150°C, max. power consumption: 2000VA, operating pressure: 4bar-8bar. 2) A defective Velcorin VDT 50 L. The screen and the vent screw are defective on this machine and cannot be repaired. The machine is available as a defective spare parts carrier. Both machines have touch panels. Documentation available. On-site inspection is possible.

more