Innovac GmbH Used machines from Germany
de-DE de-DE | pl-PL pl-PL |
  • Phone: +49 30 793 14 38
  • Email
Innovac used-machines Latest Offers  [381 - 400 of 2438]
Tallying-Machine-King-TB4 used
Tallying Machine
King TB4
Germany
2006
used
on request
INNO28618
Counting capacity: tablets: 2600/h, capsules: 800/h, containers: 30/h, batch capacity: 10000 units, material: stainless steel. Machine dimensions X/Y/Z: approx. 900mm/700mm/660mm, weight: approx. 40kg. Documentation available. On-site inspection is possible.
more
Compact-Shrinking-Unit-Italdibipack-Espert-2N used
Compact Shrinking Unit
Italdibipack Espert 2N
Germany
2014
used
on request
INNO28617
Tunnel dimensions X/Y: 420mm/240mm, welding frame dimensions X/Y: 500mm/400mm, max. roll width: 600mm, max. product height: 150mm, tunnel length: 700mm, machine dimensions X/Y/Z: approx. 2400mm/900mm/1550mm, weight: approx. 300kg. Documentation available. On-site inspection is possible.
more
Fork-Lift-Heli-jungenheinrich-linde-CPOD25H-EJC-Z16-L-14 used
Fork Lift
Heli/jungenheinrich/linde CPOD25H/EJC Z16/L 14
Germany
2010
used
on request
INNO28616
Various gas forklift trucks, electric forklift trucks and electric high-lift trucks from various manufacturers are available. 1) Heli gas forklift truck, load capacity: 2500kg. 2) Heli gas forklift truck, load capacity: 2500kg. 3) Jungheinrich electric forklift truck, load capacity: 2000kg. 4) Jungheinrich electric high-lift pallet truck, load capacity: 1600kg. 5) Electric high-lift pallet truck Linde, load capacity: 2000kg. On-site inspection is possible.
more
Robot-Bosch-SR6 used
Robot
Bosch SR6
Germany
unknown
used
on request
INNO28615
Two incomplete Bosch robot systems are available. System 1 is missing the RHO 4.1 controller, system 2 is missing the drive module. Stand length: 500mm, stroke quill 1/2: 200mmx20mm/200mmx25mm, load capacity 1/2: 5kg/8kg, robot weight: approx. 50kg. Documentation available. On-site inspection is possible.
more
Aluminum-Wet-Separator-Ventilatorenfabrik-Oelde-RWA315E-AL used
Aluminum Wet Separator
Ventilatorenfabrik Oelde RWA315E-AL
Germany
2014
used
on request
INNO28614
Volume flow: 6300Bm³/h, total pressure difference: 40mbar, motor power: 11kW, speed: 3000rpm, machine weight: 400kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025.
more
Aluminum-Wet-Separator-Ventilatorenfabrik-Oelde-RWA450E-AL used
Aluminum Wet Separator
Ventilatorenfabrik Oelde RWA450E-AL
Germany
2018
used
on request
INNO28613
Volume flow: 12500Bm³/h, total pressure difference: 40mbar, motor power: 22kW, speed: 3000rpm, machine weight: 1275kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025.
more
Cylindrical-Grinding-and-Polishing-Machine-Loeser-RP+S-374-2 used
Cylindrical Grinding and Polishing Machine
Loeser RP+S 374/2
Germany
2016
used
on request
INNO28612
Two Loeser centerless round polishing machines are available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine with input and output table: 1000mm/1000mm. Including magazines and input and output table. Documentation available. On-site inspection is possible. Expected to be available from April 2025.
more
Balancing-Machine-Schenck-Rotec-HM30BU used
Balancing Machine
Schenck Rotec HM30BU
Germany
2022
used
on request
INNO28611
A Schenck horizontal balancing machine is available. Bearing journal diameter: 10mm-160mm, max. workpiece weight: 700kg, max. workpiece diameter: 1260mm, max. bearing spacing width: 1330mm. Documentation available. On-site inspection is possible.
more
Paper-Jogger-Krifft-and-Zipser-E-230-RL-MZ-SO used
Paper Jogger
Krifft & Zipser E 230 RL/MZ/SO
Germany
2011
used
on request
INNO28610
A Krifft & Zinser pallet turning machine is available. Connected load: 24kW, machine weight: approx. 4500kg. Documentation available. On-site inspection is possible.
more
CNC-Machining-Center-Starrag-Heckert-CWK-500 used
CNC Machining Center
Starrag Heckert CWK 500
Germany
2006
used
on request
INNO28609
Travel X/Y/Z: 800mm/750mm/805mm, feed: 20m/min, rapid traverse: 40m/min, pallet dimensions X/Y: 500mm/500mm, max. Table load: 500kg, number of pallets: 2, rotary table: 360°, spindle speed: 10000rpm, spindle power: 37kW, tool holder: SK40, tool positions: 60, machine dimensions X/Y/Z: approx. 5800mm/5100mm/3500mm, weight: approx. 15500kg, control: Siemens Sinumerik. The coolant temperature control of the machine is defective, but a spare part is available. Documentation available. On-site inspection is possible.
more
Center-Lathe-Wmw-DLZ-450x1600 used
Center Lathe
Wmw DLZ 450x1600
Germany
1965
used
on request
INNO28608
A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.
more
CNC-Universal-Milling-Machine-Maho-MH-600C used
CNC Universal Milling Machine
Maho MH 600C
Germany
unknown
used
on request
INNO28602
Travel X/Y/Z: 600mm/400mm/500mm, speed: 5000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 3900mm/2900mm/2000mm, weight: approx. 3600kg, control: Maho CNC 432, operating hours: 47333h. On-site inspection is possible.
more
Soldering-Cabin-Pötter-PK-IAT-L-1400 used
Soldering Cabin
Pötter PK-IAT-L 1400
Germany
2011
used
on request
INNO28601
A soldering booth including extraction is available. Documentation available. On-site inspection is possible.
more
Rope-Winches-Konecranes-HoistMaster-2i used
Rope Winches
Konecranes HoistMaster 2i
Germany
unknown
used
on request
INNO28600
Two identical Konecranes wire rope hoists are available. Including frequency converter and braking resistor. Documentation available. On-site inspection is possible.
more
CNC-Table-Drilling-Machine-Tos-WHN-10-TNC used
CNC Table Drilling Machine
Tos WHN 10 TNC
Germany
1989
used
on request
INNO28598
Two similar TOS CNC bench drilling machines (built in 1986 and 1989) with the same parameters are available. Travel X/Y/Z/W: 1200mm/1100mm/1000mm/600mm, spindle diameter: 100mm, tool holder: ISO 50, max. table load: 3000kg, table: rotary table, accuracy X/Y/Z: +/-0.02mm, control: Heidenhain TNC 135, including various angles, cutter heads, milling cutters, tool holders and other items. Documentation available. On-site inspection is possible. Individual sale possible.
more
Hand-Screw-Press-Metalwag-YB-1 used
Hand Screw Press
Metalwag YB-1
Germany
unknown
used
on request
INNO28597
An old Metalwag manual spindle press is available. Pressing force: 10000kg, stand distance: 320mm, stroke: 120mm, balancing diameter: 1200mm, table dimensions X/Y: 300mm/300mm, machine dimensions X/Y/Z: approx. 1200mm/1200mm/1700mm, weight: approx. 250kg. On-site inspection is possible.
more
CNC-Drilling-and-Milling-Machine-Busch-FB-1-150 used
CNC Drilling and Milling Machine
Busch FB 1-150
Germany
1992
used
on request
INNO28595
Travel X/Y/Z: 1000mm/150mm/200mm, table dimensions X/Y: 1300mm/300mm, speed: 6000rpm, tool positions: 8, control: Siemens Sinumerik 810, weight: approx. 3200kg. Coolant system included. Documentation available. On-site inspection is possible.
more
Single-Column-Press-Neff-T-6.3-EP10 used
Single Column Press
Neff T 6.3/EP10
Germany
1989
used
on request
INNO28594
Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.
more
CNC-Travelling-Column-Milling-Machine-Matec-30-HV used
CNC Travelling Column Milling Machine
Matec 30 HV
Germany
2003
used
on request
INNO28593
Travel X/Y/Z: 3000mm/800mm/1100mm, rapid traverse X/Y/Z: 30m/min, feed X/Y/Z: 30m/min, spindle type: DMS 112, speed: 12000rpm, power: 30kW, torque: 190Nm, tool holder: HSK 63 A, tool positions: 48. Drilling capacity steel: approx. 60mm, milling capacity: approx. 500cm³, tapping capacity: M30, head tilt: +/-90°, table dimensions X/Y: 3500mm/835mm, face plate diameter: 630mm. Machine dimensions X/Y/Z: approx. 7000mm/6000mm/4000mm, weight: approx. 15000kg, control: Bosch type 3 Osa. Including 70bar internal coolant supply, chip conveyor, loading doors for crane loading, 3D radio measuring probe, direct measuring systems for X/Y/Z, cooling unit and other accessories. Documentation available. On-site inspection is possible.
more
Drilling-Machine-Alzmetall-Abomat-30 used
Drilling Machine
Alzmetall Abomat 30
Germany
1982
used
on request
INNO28592
Drilling capacity: 35mm, mounting: MK4, speed: 1400 rpm, feed: 0.4mm/rev. On-site inspection is possible.
more
Innovac Gebrauchtmaschinen Our Program
Agricultural-machines 1
Automation-technology 59
Beverage-filling-technology 30
Complete-production-lines 3
Construction-machinery 24
Energy-management 129
Food-processing-and-beverage 128
Material-storage 66
Materials-handling-technology 55
Measurement-and-testing 53
Medical-equipment 5
Metal-processing-machines 927
Mining 2
Office-equipment 1
Other-machines 72
Packaging-machines 202
Pharmaceutical-and-cosmetics 19
Plastics-processing-machines 181
Printing-machines 73
Process-equipment-and-chemistry 137
Packaging-material-machinery 74
Robotics 37
Surplus-goods 4
Textile-machinery 72
Utility-vehicles 14
Woodworking-machines 70