A tray sealer MetalTech is available. Materials: plastic trays/aluminium trays, max. tray dimensions X/Y: 325mm/265mm. An on-site inspection is possible.
A packing station Marel including three scales is available. The machine is suitable, for example, for flow pack packaging (Geba SC 125 MAV etc.). It is well packed and ready for collection. Documentation available. An on-site inspection is possible.
A small tunnel oven for pizza production is available. Heating capacity: 10kW, temperature range: 120°C-300°C, conveyor time: 90s-20min, conveyor belt dimensions X/Y: 460mm/1320mm, baking area X/Y: 460mm/610mm, production capacity for 26cm pizzas: approx. 70 pieces/h, machine dimensions X/Y/Z: approx. 1450mm/1000mm/450mm, weight: approx. 170kg. An on-site inspection is possible.
A dividing system consisting of longitudinal and cross-cut saw Anthon is available. Production capacity at 800mm/500mm: approx. 20m³/h, max. panel dimensions X/Y: 6300mm/2500mm, total system dimensions X/Y/Z: approx. 48m/16m/3m, weight: approx. 60t. 1) Saw Anthon LNB-LNB, year of manufacture: 1994, max. package height: 150mm, control: Siemens S5. 2) In-house paternoster, decks: 3, levels: 2. 3) 4x liftomat Holzma Hau series, years of manufacture: 2004, stacking positions: 4. 4) Feeding system Systraplan, year of manufacture: 1989, stacking positions: 3. 5) Cut-off saw Holzma, year of manufacture: 1996. 6) Chipper Masur LZ 800, year of manufacture: 2003. Includes critical spare parts, such as a replacement control unit. This is a system for mass production. Documentation available. An on-site inspection is possible. Expected to be available from October 2026.
Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible.
This is a side seam wicket bag machine Lemo Intermat 850 STN-CP Knoter, production type: wicket bags for bread, chicken, diapers, toilet paper, hygiene products and other types of wicket bags, number of lanes: single lane / lane wicket, processable materials: LDPE, HDPE, PP and recycled extracts, sealing width (bag length): 120-450mm, draw length (bag width): 200-850mm, gripper arm length: 600mm, max. linear speed: 65m/min, output capacity: 140 knot bags/min, max. number of bags per stack: 250, drive system: PLC-controlled, operator interface (terminal), print mark control, servo motor drive, nip feed rollers, sealing bars. Attachments and accessories: bottom gusset (only bottom gusset included), handle unit, longitudinal sealer, pre-sealer, angle sealer, cross sealer, handle punch, photo cell for printed film, automatic one-step conveyor (index conveyor), handle hole punch, G-gusset unit, V-gusset station, web guiding system 1800mm, anti-static bars, automatic labeling system, year of manufacture: 2012. Machine is in good condition.
X-axis: 320mm, Y-axis: 400mm, Z-axis: 40mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.
X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.
X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.
A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible.
Seho 8040 PCS with laminar and turbulent wave, preheating with heating plates and IR radiator, minimum quantity flux system, component cooler at the outlet, wave width: 400mm, max. usable working width: 390mm, max. component height: 100mm, max. PCB length: 562mm, solder nozzle: Delta B, max. wave height: 8mm, solder volume: 400kg, heating capacity solder pot: 9kW, heating-up time 20-250°C: approx. 150min, heating-up time 190-250°C: approx. 60min, preheating zone length: 700mm, three heating zones: 3x 3kW, max. preheating capacity: 9kW, transport angle: manually adjustable, 6-8°, transport speed: 0.5-2m/min, running direction: from left to right, with loading aid/slide conveyor (1000mm), unloading aid (500mm) and entry stopper for solder frame separation, exhaust connection diameter: 2x 150mm, extraction capacity per connection: 500m³/h, supply voltage (50Hz): 230/400V, rated power: 31,000W, total connected load: 18.5kW, compressed air connection: R 1/4 inch (6 bar), nitrogen connection: R 1/4 inch (6 bar). With microprocessor control PCS 96, alphanumeric display & membrane keypad (16 lines of 40 characters), 100 soldering programs, interface for host computer with visualized machine overview & BDE data backup, interface for BDE data acquisition via serial printer, control loop for transport and heating. Length: 2300mm, width: 825mm, height: 1615mm, weight without solder filling: 400kg.
Gun: PH-3N, voltage: 400V, weight: 50kg. Supplied with operating manual, 2x ground cables with clamp BMS/BMK, gas connection, HZ-stud holder, adapter piece and key. An on-site inspection is possible.
These are 21x21 inch and 30x42 inch warp beams, for direct warping and knitting mills. With documentation, without accessories. No defects known, last overhauled. An on-site inspection is possible.
Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine IEMCA BOSS 542/32, Ø 8-41mm. With complete documentation. The machine has been idle for one year as the turret head is missing, no further defects known, operating hours unknown, without maintenance records. With bar loader and numerous tools.
Najnowsze oferty [1701 - 1720 of 3072]
de-DE
en-US
