Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1561 - 1580 of 2703]

Maszyna do szlifowania i polerowania cylindrycznego

Loeser RP+S 374/2

Niemcy

2016

używany

na żądanie

INNO28612

A centerless round polishing machine Loeser is available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine system with infeed and outfeed table: 1000mm/1000mm. Including magazines as well as infeed and outfeed table. Documentation available. An on-site inspection is possible.

Tokarka centralna

Wmw DLZ 450x1600

Niemcy

1965

używany

na żądanie

INNO28608

A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.

Kabina lutownicza

Pötter PK-IAT-L 1400

Niemcy

2011

używany

na żądanie

INNO28601

A soldering booth including extraction is available. Documentation available. On-site inspection is possible.

Wciągarki linowe

Konecranes HoistMaster 2i

Niemcy

nieznany

używany

na żądanie

INNO28600

Six identical Konecranes wire rope hoists are available. Including frequency converter and braking resistor. Documentation available. On-site inspection is possible.

Prasa jednokolumnowa

Neff T 6.3/EP10

Niemcy

1989

używany

na żądanie

INNO28594

Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.

Wiertarka

Alzmetall Abomat 30

Niemcy

1982

używany

na żądanie

INNO28592

Drilling capacity: 35mm, mounting: MK4, speed: 1400 rpm, feed: 0.4mm/rev. On-site inspection is possible.

Piła taśmowa

Mep Shark 281

Niemcy

nieznany

używany

na żądanie

INNO28590

Cutting capacity 0°: round material: 250mm, square material: 230mm/230mm, flat material: 280mm/200mm. Cutting capacity 45°: round material: 190mm, square material: 180mm/180mm, flat material: 180mm/180mm. Cutting capacity 60°: round material: 120mm, square material: 110mm/110mm, flat material: 110mm/110mm. Sawing speed: 72m/min, saw blade dimensions X/Y/Z: 2950mm/27mm/0.9mm, weight: approx. 370kg. On-site inspection is possible.

Maszyna do cięcia laserowego CNC

Bystronic ByStar Fiber 10kW

Niemcy

2017

używany

na żądanie

INNO28587

Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

Komórka dozująca

Camelot Systems CAM/ALOT System 5000

Niemcy

1998

używany

na żądanie

INNO28581

A Cookson dispensing machine for the SMT industry is available. Dispensing capacity 50 mil pitch solder paste: 25000 dots/h, dispensing capacity 3mm pitch SMD adhesive: 22000 dots/h, dispensing range X/Y: 450mm/450mm, travel X/Y/Z: 483mm/483mm/55.8mm, feed X/Y: 406mm/s, SMEMA compatibility: available. Including spare parts, seals, hoses etc. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC z kolumną ruchomą

Soraluce FL 6000

Niemcy

2011

używany

na żądanie

INNO28578

Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible.

Piec do wyżarzania

Herdieckerhoff STE 300/1000

Niemcy

1986

używany

na żądanie

INNO28576

A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible.

Belka dźwigowa

Tiger TA-LK

Niemcy

2014

używany

na żądanie

INNO28560

A Tiger cassette lifting beam is available. Pick-up width: 2090mm, load capacity: 2500kg, machine dimensions X/Y/Z: approx. 800mm/700mm/650mm, weight: approx. 250kg. Documentation available. On-site inspection is possible.

Maszyna do formowania, wypełniania i uszczelniania

Fuji FW3710 BS/Ba7

Niemcy

2014

używany

na żądanie

INNO28556

A Fuji horizontal flow-wrapping machine with integrated shrink unit and conveying system is available. Packaging capacity: 1000 bags/min, max. film width: 600mm, infeed screw: approx. 2300mm, max. product dimensions X/Y/Z: 200mm/250mm/100mm, material: stainless steel, machine dimensions X/Y/Z: approx. 4800mm/1300mm/1500mm. Documentation available. On-site inspection is possible.

Prasa ramowa

Schafberger + Sprödhuber Bavaria

Niemcy

1996

używany

na żądanie

INNO28554

Working dimensions X/Y: 3000mm/2000mm, cylinder stroke: 1000mm, height adjustment: 2000mm-2600mm, length adjustment: 3000mm-6000mm, pressing force: 2t, space requirement: 4100mm/1000mm/2450mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

Piła tarczowa

Eisele LMS II HVG-225

Niemcy

1980

używany

na żądanie

INNO28547

Saw blade diameter: 350mm, speed: 3400rpm, cutting capacity at 90°: 120mm/75mm, cutting capacity at 45°: 90mm/65mm, machine dimensions X/Y/Z: approx. 700mm/900mm/1000mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Wytłaczarka

Bandera 17kW/32kW/49kW

Niemcy

1990

używany

na żądanie

INNO28542

A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible.

Składarka

Griesser & Kunzmann GUK K52-6

Niemcy

2000

używany

na żądanie

INNO28536

Folding units buckle plate/sword: 6/2, max. sheet dimensions X/Y: 800mm/540mm, min. sheet dimensions for parallel fold: 150mm/210mm, min. sheet dimensions for cross fold: 150mm/210mm, min. sheet dimensions for triple fold: 210mm/300mm. Folding capacity with parallel fold/cross fold: 40000/22000 sheets/h, paper weight range: 40g-300g/m². Machine dimensions X/Y/Z: approx. 3700mm/1500mm/1700mm, weight: approx. 1300kg, machine working area requirement: approx. 5500mm/3000mm. Including flat pile feeder with suction drum from Kremser, a movable and variable delivery for parallel and cross breaking as well as compressor. Documentation available. On-site inspection is possible.

Młyn tnący

Rapid GK-1000

Niemcy

1977

używany

na żądanie

INNO28535

A Rapid heavy-duty granulator is available. Only unreinforced polyolefins were ground with the mill, so it was not subjected to any load. Flour chamber opening X/Y: 1050mm/600mm, motor power: 75kW, rotor knives: 2x5, stator knives: 2, sieve: 8mm, throughput: depending on material. Machine dimensions X/Y/Z: approx. 2750mm/2100mm/2850mm, machine weight: approx. 4550kg. Documentation available. On-site inspection is possible.

Obrotowa stacja podnoszenia

Kuttler PR-90 LS150

Niemcy

2008

używany

na żądanie

INNO28529

A Kuttler automatic handling machine that moves workpieces or material blanks on a production line is available. Infeed height: 1050mm, outfeed height: 900mm, cutting and turning range: 90°, workpiece lowering: 150mm, machine dimensions X/Y/Z: approx. 14500mm/1000mm/2100mm, weight: approx. 750kg. Documentation available. On-site inspection is possible.

Jednostka ekstrakcyjna

Spänex Additor-K-II-II-VU-15-SBU-165-S2-000

Niemcy

1995

używany

na żądanie

INNO28522

Volume flow: 4080m³/h, filter area: 34m², BIA category: G, differential pressure: 1650Pa, filtration surface load: 120m³/h-m², air density: 1.2kg/m³, operating temperature: 20°C. Documentation available. On-site inspection is possible.