Innovac GmbH Used machines from Germany
Innovac maszyny-uzywane Najnowsze oferty  [1461 - 1480 of 2460]
Młyn-kulowy-Fryma-MSM-50 używany
Młyn kulowy
Fryma MSM-50
Niemcy
1994
używany
na żądanie
INNO26553
Working pressure working chamber/ double jacket: 2.5/2bar, with documentation and accessories, on-site inspection is possible, videos not available.
Grzałka-bezpośrednia-Dhe używany
Grzałka bezpośrednia
Dhe
Niemcy
2001
używany
na żądanie
INNO26555
Throughput capacity: 600 litres/h, in the process the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, is heated to 130° C by steam injection in less than a second. The process heats the product (milk, cream, liquid egg, ice cream mix, etc.), which has been heated to 65° C in the counterflow, to 130° C in less than a second by steam injection and then cools it again in the shortest possible time by evacuation, further cooling is achieved by the inflowing product in the counterflow and ice water, includes feed tank, speed-controlled pumps, homogeniser, preheater, infusion tank, expansion tank, steam condenser, cleaning agent tank and other elements, on-site inspection is possible.
Instalacja-ultrafiltracyjna-Alpma używany
Instalacja ultrafiltracyjna
Alpma
Niemcy
nieznany
używany
na żądanie
INNO26552
Was used for the production of double cream cheese, low-fat quark, as well as 20/40% quark and skyr, milk with 3.7% fat was also concentrated to 37% dry matter, throughput capacity: approx. 3500-5000 litres with a service life of 8 hours, includes (1) stage 1 with six 6 inch pressure pipes, each with two spiral wound modules, filter Mikrodyn Nadir DS-IP020-6338E1, filter area: 13.4m²/module, total filter area: 160.8m², flow rate centrifugal pump: 145m³/h, 3.5bar (2) Stage 2 with four pressure pipes in the same design as in stage 1, filter area: 107.2m², flow rate centrifugal pump: 160m³/h, 5bar (3) P&F module Tetra M37/9/2, filter area: 9m², flow rate positive displacement pump: 75m³/h, 6bar, an on-site inspection is possible.
Maszyna-do-cięcia-folii-Robust-FSM-15-In-Line używany
Maszyna do cięcia folii
Robust FSM 15 In-Line
Niemcy
2007
używany
na żądanie
INNO26557
Working width: 1300mm, compressed air consumption: 550l/min, connected load: 2kW, length: 3000mm, width: 1600mm, weight: 2t. On-site inspection is possible, with documentation.
Piec-przelotowy.-Balzer-+-Co.-DG-18x3x38 używany
Piec przelotowy.
Balzer + Co. DG 18x3x38
Niemcy
2001
używany
na żądanie
INNO26542
Usable chamber dimensions: 3800x1800x300mm, max. operating temperature: 1000°C, max. annealing temperature: 980°C, max. workpiece weight: 800kg, fuel: natural gas, connected load: 600kWh, with documentation, on-site inspection is possible.
Stanowisko-do-testowania-pomp-Etewe-Gmbh używany
Stanowisko do testowania pomp
Etewe Gmbh
Niemcy
2006
używany
na żądanie
INNO26540
Delivery head: 0-9.5m, pump speed: 6000/min, water temperature: 10-50°C, tank volume: 8m³, max. delivery pressure: 25bar, with documentation, on-site inspection is possible.
Generator-prądu-Eisemann-BSKA-9E używany
Generator prądu
Eisemann BSKA 9E
Niemcy
2016
używany
na żądanie
INNO26539
Two identical machines are available, power 1/2: 5000/9000VA, speed: 1800/3150/min, length: 700mm, width: 440mm, height: 580mm, weight: 126kg, with documentation, the generators are unused.
Pasteryzator-tunelowy-Krones-LC-23.6-523-31 używany
Pasteryzator tunelowy
Krones LC 23.6-523-31
Niemcy
2014
używany
na żądanie
INNO26541
Number of decks: 1, total number of zones: 12, number of pairs of regenerative zones: 3, number of pasteurising zones: 5, number of separate cooling zones: 1, number of tunnel modules (without infeed and outfeed module): 12, pump side: right, belt load: 152.6 kg/m², max. belt load: 260kg/m², throughput capacity at 0.15l, 0.25l: 65,000 cans/h, with documentation, on-site inspection is possible.
Maszyna-do-badania-tkanin-i-szczelin-Weiss-SEM-SRE używany
Maszyna do badania tkanin i szczelin
Weiss SEM-SRE
Niemcy
1988
używany
na żądanie
INNO26531
Connected load: 3.5kW, was maintained regularly, an inspection is possible.
Drukarka-atramentowa-Videojet-1550 używany
Drukarka atramentowa
Videojet 1550
Niemcy
nieznany
używany
na żądanie
INNO26524
There are two identical Videojet 1550 available, length: 382mm, width: 361mm, height: 553mm, weight: 22kg, with extensive documentation, on-site inspection is possible.
Paletyzator-Beumer-PALETPAC-KP używany
Paletyzator
Beumer PALETPAC KP
Niemcy
1984
używany
na żądanie
INNO26520
Includes feeding station, destacking station, infeed section, turning device, distribution roller conveyor, roller table, empty pallet lifting unit, pallet separator, switch cabinet, roller conveyor, pressure elements and other components, with comprehensive documentation, on-site inspection is possible.
Mikser-porcyjny-M-tec-MR-150V używany
Mikser porcyjny
M-tec MR 150V
Niemcy
1995
używany
na żądanie
INNO26523
Net/gross volume mixer: 1500/2000l, useful volume secondary tank: 1790l, motor power: 55kW, length: 4700mm, width: 2500mm, height: 3400mm, weight mixer/ secondary tank:3.9/ 1.21t, with extensive documentation, on-site inspection is possible.
Automatyczna-maszyna-do-wykrawania-i-gięcia-Weber używany
Automatyczna maszyna do wykrawania i gięcia
Weber
Niemcy
nieznany
używany
na żądanie
INNO26514
Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.
Frezarka-NC-Mexpol-F40-NA2 używany
Frezarka NC
Mexpol F40 NA2
Niemcy
1991
używany
na żądanie
INNO26511
X-travel: 600mm, y-travel: 400mm, z-travel: 350mm, clamping surface dimensions: 400x800mm, width T-slots: 14mm, max. workpiece weight: 300kg, connected load: 14kW, control: Heidenhain, length: 1700mm, width: 1700mm, height: 2000mm, weight: 2t, with documentation, an on-site inspection is possible.
Kalander-Eduard-Küsters-413.50 używany
Kalander
Eduard Küsters 413.50
Niemcy
1985
używany
na żądanie
INNO26515
Workpiece width: 3200mm, max. force: 555kN, line force: 150N/mm, including Küsters floating roller (S-roller), 1x Raculan, 1x steel roller, on-site inspection is possible.
Pasteryzator-błyskawiczny-Apparatebau-Nordhausen używany
Pasteryzator błyskawiczny
Apparatebau Nordhausen
Niemcy
2003
używany
na żądanie
INNO26507
Capacity: 9350l, output: 180hl/h, max. operational overpressure: -1 to 4bar, operating temperature: 0-100°C, medium: beer, weight: 2t, with documentation, an inspection is possible, without mixing tanks and zip tanks.
Centrum-obróbcze-Emmegi-QUADRA używany
Centrum obróbcze
Emmegi QUADRA
Niemcy
2007
używany
na żądanie
INNO26496
Number of axes: 6, x-travel: 240mm, y-travel: 350mm, z-travel: 350mm, U-travel: 9500mm, A-travel: 360°, max. bar length: 7500mm, max. workpiece weight: 500kg, work spindle power: 4.55kW, suitable for drilling, milling, thread cutting, aluminum cutting, has been regularly serviced, with documentation and roller conveyors, on-site inspection is possible.
Owijarka-z-przepływem-poziomym-Fuji-DDMQF-F11391 używany
Owijarka z przepływem poziomym
Fuji DDMQF-F11391
Niemcy
1998
używany
na żądanie
INNO26500
With documentation and some accessories, an on-site inspection is possible, but not under power.
Sprężarka-śrubowa-Mark-MSA-11-IVR-G2 używany
Sprężarka śrubowa
Mark MSA 11 IVR G2
Niemcy
2013
używany
na żądanie
INNO26499
Max. operational pressure: 10bar, connected load: 11kW, weight: 235kg, an inspection is possible.
Centrum-nożycowe-Pivatic-PivaCut używany
Centrum nożycowe
Pivatic PivaCut
Niemcy
nieznany
używany
na żądanie
INNO26491
Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.