Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [121 - 140 of 2444]

Robot paletyzujący

Kuka Quantec-2 Series KR 120 R2700 - 2 / FLR

Niemcy

2022

używany

na żądanie

INNO28541

A Kuka palletizing robot with few operating hours is available. Payload: 120kg, reach: 2700mm, weight: approx. 1100kg, control: KR C4, operating hours: approx. 120h. Including control cabinet, cable set and Smartpad. Documentation available. On-site inspection is possible.

Suwnica pomostowa dwudźwigarowa

E & W (siempelkamp) H2/B4

Niemcy

2001

używany

na żądanie

INNO28540

An E & W double beam bridge crane with a Demag MSP 45 magnet system is available. Load capacity: 2x3200kg, max. lifting height: 5000mm, span: 16300mm, crane wheel diameter: 160mm, wheelbase: 2500mm, max. wheel load: 43.1kN, crab wheel diameter: 125mm, crab gauge: 1585mm, speed hoist/crab/crane: 7m/20m/32m/min, crab weight: approx. 650kg, total crane weight: approx. 7000kg. Documentation available. On-site inspection is possible.

Regał paletowy

Bito P2

Niemcy

2021

używany

na żądanie

INNO28539

A pallet racking system (only the 3 racks on the left in the picture) is available. Pallet spaces: 108. components: 15x BITO P2 pallet racking frames with a height of 4000mm, 8x BITO push-through protection with a length of 2750mm and 44x pallet beams with a length of 2750mm. The racks are dismantled. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Grob G351

Niemcy

2015

używany

na żądanie

INNO28538

Travel X/Y/Z: 600mm/855mm/750mm, rapid traverse X/Y/Z: 70m/45m/90m/min, tool holder: HSK 40, speed: 16000rpm, max. workpiece weight: 300kg, control: Heidenhain, machine weight: approx. 15300kg. Including 38bar IKZ, Blum laser probe, tools and holder. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Grob G350

Niemcy

2013

używany

na żądanie

INNO28537

Travel X/Y/Z: 600mm/855mm/750mm, rapid traverse X/Y/Z: 70m/45m/90m/min, tool holder: HSK 40, speed: 28000rpm, max. workpiece weight: 300kg, control: Heidenhain, machine weight: approx. 15300kg, spindle hours: approx. 6000h. Including 38bar IKZ, Blum laser probe, tools and holder. Documentation available. On-site inspection is possible.

Składarka

Griesser & Kunzmann GUK K52-6

Niemcy

2000

używany

na żądanie

INNO28536

Folding units buckle plate/sword: 6/2, max. sheet dimensions X/Y: 800mm/540mm, min. sheet dimensions for parallel fold: 150mm/210mm, min. sheet dimensions for cross fold: 150mm/210mm, min. sheet dimensions for triple fold: 210mm/300mm. Folding capacity with parallel fold/cross fold: 40000/22000 sheets/h, paper weight range: 40g-300g/m². Machine dimensions X/Y/Z: approx. 3700mm/1500mm/1700mm, weight: approx. 1300kg, machine working area requirement: approx. 5500mm/3000mm. Including flat pile feeder with suction drum from Kremser, a movable and variable delivery for parallel and cross breaking as well as compressor. Documentation available. On-site inspection is possible.

Młyn tnący

Rapid GK-1000

Niemcy

1977

używany

na żądanie

INNO28535

A Rapid heavy-duty granulator is available. Only unreinforced polyolefins were ground with the mill, so it was not subjected to any load. Flour chamber opening X/Y: 1050mm/600mm, motor power: 75kW, rotor knives: 2x5, stator knives: 2, sieve: 8mm, throughput: depending on material. Machine dimensions X/Y/Z: approx. 2750mm/2100mm/2850mm, machine weight: approx. 4550kg. Documentation available. On-site inspection is possible.

Frezarka uniwersalna CNC

Deckel Maho DMU 80 T

Niemcy

2001

używany

na żądanie

INNO28534

Travel X/Y/Z: 880mm/630mm/630mm, B-axis: -120°/30°, C-axis: 360°, table dimensions X/Y: 1250mm/700mm, max. table load: 600kg, speed: 12000rpm, tool holder: SK40, tool positions: 32, max. tool length: 315mm, max. tool weight: 8kg. Machine dimensions X/Y/Z: approx. 6500mm/5000mm/2700mm, weight: approx. 9000kg, operating hours: 85151h, spindle hours: 15391h. Documentation available. On-site inspection is possible.

Skala podłogowa

Niemcy

nieznany

używany

na żądanie

INNO28533

An older floor scale is available. Minimum weighing weight: 25kg, max. weighing weight: 1500kg, weighing accuracy: 0.5kg. On-site inspection is possible.

Nawijarka foliowa

Cyklop Robopac T

Niemcy

1993

używany

na żądanie

INNO28532

Two identical Cyklop stretch trolleys are available. Charger included. The machines have not been used since 2018. On-site inspection is possible.

Tokarka uniwersalna CNC

Mag Ias DUS 800 ti/6000

Niemcy

2013

używany

na żądanie

INNO28531

Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible.

System czyszczący

Branson B452R

Niemcy

nieznany

używany

na żądanie

INNO24984

Heating output: 2000W, ultrasonic frequency: 40kHz, weight: 275kg.

Suszarka granulatu

Motan LS 120/0-0+0-0

Niemcy

nieznany

używany

na żądanie

INNO28530

Dry air volume: 120m³/h, connected load: 15.4kW, heat output: 10.5kW. On-site inspection is possible.

Obrotowa stacja podnoszenia

Kuttler PR-90 LS150

Niemcy

2008

używany

na żądanie

INNO28529

A Kuttler automatic handling machine that moves workpieces or material blanks on a production line is available. Infeed height: 1050mm, outfeed height: 900mm, cutting and turning range: 90°, workpiece lowering: 150mm, machine dimensions X/Y/Z: approx. 14500mm/1000mm/2100mm, weight: approx. 750kg. Documentation available. On-site inspection is possible.

Wytrzymała przyczepa

Kampe SLA VRA 54265

Niemcy

2022

używany

na żądanie

INNO28528

Payload: 20000kg, speed: 6km/h, loading area height: approx. 2560mm, total height: approx. 3330mm, tare weight: 3325kg. Includes a matching roof. The roof is connected at 4 points with 4 screws and can be removed as required. Documentation available. On-site inspection is possible.

Prasa krawędziowa CNC

Fasti 940-200-40

Niemcy

1998

używany

na żądanie

INNO28527

Working width: 4000mm, pressing force: 2000kN, max. operating pressure: 30MPa, connected load: 22.38kW, protective distance: 156mm, holding time: 98ms. Documentation available. On-site inspection is possible.

Tokarka wysokoobrotowa

Okuma LS 450

Niemcy

nieznany

używany

na żądanie

INNO28526

Center height above bed/slide: 450mm/250mm, center distance: 850mm, spindle bore: 52mm, travel X/Z: 270mm/140mm, quill stroke: 150mm, quill diameter: 80mm. Machine dimensions X/Y: approx. 2400mm/1200mm, weight: approx. 2500kg. Some of the gears are defective, which means that the speeds cannot be operated. Documentation available. On-site inspection is possible.

Piła formatowa

Scm-d SI 150

Niemcy

1994

używany

na żądanie

INNO28525

Saw blade diameter: 400mm, max. cutting height at 90°: 140mm, max. cutting height at 45°: 97mm, speed: 5000rpm, saw blade swivel range: 0°-45°, sliding table length: 3200mm, sliding table width: 360mm, table dimensions X/Y/Z: 940mm/560mm/900mm, scoring saw blade diameter: 120mm, speed: 9200rpm, machine weight: approx. 750kg. On-site inspection is possible.

Centrum obróbcze CNC

Mazak VTC-200B

Niemcy

2000

używany

na żądanie

INNO28524

Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle-table distance: 180mm-690mm, spindle center-to-column distance: 530mm, spindle mount: SK40, spindle power: 15kW/11kW, spindle speed: 10000rpm, tool positions: 24, feed: 8m/min, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 3350mm/2900mm/2800mm, weight: approx. 6000kg, control: Mazatrol 640M. On-site inspection is possible.

Router brzegowy

Hebrock AKV 83

Niemcy

1994

używany

na żądanie

INNO28523

A Hebrock edge milling machine is available. Workpiece height range: 10mm-50mm, max. edge thickness: 1mm, min. workpiece width: 50mm, min. workpiece length: 170mm, feed speed: 4m/min, connected load: 3kW. Machine dimensions X/Y/Z: approx. 1750mm/700mm/1250mm, weight: approx. 120kg. On-site inspection is possible.