Maszyny Uzywane Niemcy - Innovac GmbH

Maszyna do pęcherzyków powietrza

Fromm AP502

Niemcy

2010

używany

na żądanie

INNO26999

Film width: 420mm, max. film roll diameter: 280mm, connected load: 2kVA, length: 1600mm, width: 767mm, height: 1292mm, weight: 228kg.

więcej

Maszyna do formowania wtryskowego

Arburg Allrounder 320C 500-100

Niemcy

1998

używany

na żądanie

INNO26997

Clamping force: 500kN, min. installation height: 200mm, max. drive-up distance: 550mm, barrel diameter: 25mm, max. screw volume: 47cm³, number of core pulls: 2. Available from Q4 2024.

więcej

System spieniania PUR

Hennecke HK135

Niemcy

2005

używany

na żądanie

INNO26994

A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible.

więcej

Pakowarka do butelek

Sema Setzpackanlage

Niemcy

2018

używany

na żądanie

INNO26991

A wrapper and packer for glass bottles from a bottling line are available. Bottle formats: 500ml/1000ml, crate formats: 6/12, pallet type: Euro pallet, height of loaded pallet min./max.: 500mm/1800mm, wrapping capacity: 60 pallets/h. Documentation available. On-site inspection is possible.

więcej

4-osiowe centrum obróbcze CNC

Stama MC 526 Compact

Niemcy

2007

używany

na żądanie

INNO26987

Travel X/Y/Z: 1000mm/400mm/360mm, speed: 12000rpm, feed X/Y/Z: 10000mm/min, rapid traverse X/Y/Z: 45m/min, feed force X/Y/Z: 4000N/4000N/8000N. Spindle bearing diameter: 65mm, max. tool diameter/length: 125mm/250mm, tool holder: HSK63, max. torque: 60Nm, max. milling capacity: 350cm³, max. drilling diameter: 32mm, max. thread diameter: M30. Dimensions X/Y/Z: approx. 3600mm/3800mm/3300mm, weight: approx. 6100kg, control: Fanuc 18i MB. Hydraulic unit included. Documentation available. An on-site inspection is possible.

więcej

4-osiowe centrum obróbcze CNC

Stama MC 526 Compact

Niemcy

2007

używany

na żądanie

INNO26986

Travel X/Y/Z: 1000mm/400mm/360mm, speed: 12000rpm, feed X/Y/Z: 10000mm/min, rapid traverse X/Y/Z: 45m/min, feed force X/Y/Z: 4000N/4000N/8000N. Spindle bearing diameter: 65mm, max. tool diameter/length: 125mm/250mm, tool holder: HSK63, max. torque: 60Nm, max. milling capacity: 350cm³, max. drilling diameter: 32mm, max. thread diameter: M30. Dimensions X/Y/Z: approx. 3600mm/3800mm/3300mm, weight: approx. 6100kg, control: Fanuc 18i MB. Hydraulic unit included. Documentation available. An on-site inspection is possible.

więcej

Granulator tworzyw sztucznych

Herbold LP 450/1000 F9-2

Niemcy

2008

używany

na żądanie

INNO26981

A Herbold plastic mill with filter system is available. Capacity: approx. 1100kg/h, material feed: top via hopper/front via chute, filter system dimensions X/Y/Z: approx. 4000mm/2500mm/7500mm. On-site inspection is possible.

więcej

Drukarka atramentowa ciągła

Linx 4900

Niemcy

2007

używany

na żądanie

INNO26980

Maximum print speed: 375m/min, print heights min/max: 2mm/7.62mm, number of print lines: 1-3 lines, print materials: almost all surfaces, ink system: sealed print head system. Documentation available.

więcej

Waga wielogłowicowa

Mbp C2 SERIES

Niemcy

2021

używany

na żądanie

INNO24903

Operational hours counter: ca. 50h, with documentation and conveyor, without spare parts.

więcej

Maszyna do mielenia mięsa

Mado MEW 620

Niemcy

nieznany

używany

na żądanie

INNO26977

Filling opening diameter: 98mm, material: stainless steel, max. output: 1400kg/h, perforated disk: 3mm, dimensions X/Y/Z: approx. 1000mm/850mm/1400mm, weight: approx. 300 kg.

więcej

Linia okleinująca

Ima Combima

Niemcy

1996

używany

na żądanie

INNO26973

An edge banding line including feeding, turning device and an automatic drilling machine is available. The longitudinal machine enables the processing of thick edges and is equipped with new units and controls. The transverse machine can only process thin edges as there is no coupling unit. The machine was operated at up to 28 cycles per minute. Control system: Imatronic 150, documentation is available. Control system: Imatronic 150, including spare parts and tools. Documentation is available.

więcej

Maszyna do makaronu

Bralyx Big Plus 10.0 MK

Niemcy

2015

używany

na żądanie

INNO26976

A Brazilian machine, with good representation in London, for the production of filled pasta is available. Two intermeshing augers for the dough, one auger for the filling. Capacity: 20kg-100kg/h. Formats: savory or drop, kibbeh, pillow, ball and croquettes. Compared to Italian ravioli machines, this machine can work with considerably moister doughs and fillings. The machine works accurately to the gram while adhering to the original recipes. Dimensions X/Y/Z: 650mm/1150mm/1400mm, weight: approx. 200kg. Documentation available.

więcej

Oczyszczalnia ścieków

Agw Chargenbehandlung

Niemcy

2004

używany

na żądanie

INNO26974

A wastewater treatment plant based on batch treatment from Antech Gütling (AGW), which was used in the printed circuit board industry (electronics), is available. It consists of a waste water collection station, a batch treatment, a chemical dosing station, a sludge treatment, a post-filtration/pH final control and an exhaust air scrubber. The system treats rinsing water, acidic and alkaline concentrates as well as waste water from the resist developer, resist stripper and solder resist developer areas. The system does not treat solvents, paints, hydraulic oils, used etchings (ammoniacal/acidic), waste water containing chlorite or EDTA-based chemical copper. Capacity: approx. 3m³/h. Documentation is available.

więcej

Podnośnik nożycowy

Skyjack SJ 3219

Niemcy

2013

używany

na żądanie

INNO26967

Load capacity: 227kg, max. tilt angle: 3.5°, max. wind speed: 9.4m/s, platform height: 5800mm, operating pressure: 207bar, max. tire load: 570kg, weight: 1312kg. The battery is defective and the machine cannot be moved for long. Replacing the battery will probably solve the problem. Documentation available.

więcej

Wózek wysokiego składowania

Jungenheinrich EJC Z14

Niemcy

2009

używany

na żądanie

INNO26971

Fork dimensions X/Y/Z: approx. 1140mm/185mm/50mm, max. lifting height: approx. 4090mm, fork spacing: approx. 190mm, max. load capacity: 1400kg, drive: electric, weight: approx. 1100kg, battery weight: approx. 240kg, dimensions X/Y/Z: approx. 2000mm/840mm/1820mm. Defective battery.

więcej

Centrum obróbcze z oknem kątowym

Weinig Unicontrol 10

Niemcy

1998

używany

na żądanie

INNO26960

An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available.

więcej

System mieszania

Grieser

Niemcy

2018

używany

na żądanie

INNO26963

A vacuum butterfly mixer with container is available. Mixer: lifting height: 650mm, butterfly agitator inserts: 3, butterfly speed: 72-720rpm, scraper arm speed: 17rpm, control: Siemens Sinatic HMI, dimensions X/Y/Z: approx. 1360mm/2650mm/2450mm, weight: approx. 2400kg. Tank: mixing chamber volume: 100l, mixing chamber pressure: 0bar-1bar, heating/cooling chamber volume: 13l, heating/cooling chamber pressure: 3bar, tank jacket operating temperature min./max.: 15°C/150°C, max. bearing and seal operating temperature: 130°C.

więcej

Kabina do malowania proszkowego

Gema StandardClassic

Niemcy

2015

używany

na żądanie

INNO26948

Inlet pressure min./max.: 6bar/10bar, recommended inlet pressure: 7bar, max. compressed air water vapor content: 1.3g/³, max. compressed air oil content: 0.1mg/kg. Max. Compressed air consumption with collection container/fluidized powder trolley: 12m³/h / 47m³/h, manual coating opening X/Y: 1300mm/1300mm, number of filter elements: 3, filter area: 29.25m². Exhaust air volume initial/working area: 3200m³/h / approx. 2650m³/h, powder capacity with collection container/fluidized powder trolley: 80l/30l, dimensions X/Y/Z: 1500mm/2758mm/2100mm. Documentation available.

więcej

Maszyna do druku kopert

Winkler + Dünnebier 26 FF

Niemcy

nieznany

używany

na żądanie

INNO26954

A Winkel + Dünnebier 26 FF envelope printing machine is available. On-site inspection is possible.

więcej

Obkurczarka kapturowa

Tbs-pack HSM-320

Niemcy

nieznany

używany

na żądanie

INNO26959

Semi-tubular films: POF/PP/PE/PVC, max. film thickness: 50µm, max. product dimensions: 440mm/300mm/200mm, max. roll diameter/length: 250mm/400mm, output: 6/min. Welding frame dimensions X/Y: 320mm/460mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.

więcej