Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1141 - 1160 of 2438]

Maszyna do szycia

Brother KE 430C

Niemcy

nieznany

używany

na żądanie

INNO27336

Stitch type: lockstitch, needle type: single needle, thread type: single thread, max. sewing speed: 2700stitches/min, max. sewing field size: 40mm/30mm, stitch length min./max.: 0.05mm/12.7mm, needle system: 134 staple lift, weight: 60kg. Documentation available.

Maszyna filtrująca

Omodei & Mena KFP 470/II

Niemcy

nieznany

używany

na żądanie

INNO27334

An Omodei & Mena yeast, grape and diatomaceous earth filter is available. Number of plates: 32, plate format: 500mm/500mm, thread: NW32, max. pressure: 1000bar. Including dry run protection.

Dwuwrzecionowe centrum obróbcze CNC

Stama MC 536

Niemcy

2009

używany

na żądanie

INNO27333

Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available.

System przenośników

Profipack Gebinde- Höhenförderer

Niemcy

2009

używany

na żądanie

INNO27326

Two identical Profipack container height conveyors are available. Capacity: 25 cycles/min for 6, 8 and 12 packs, dimensions X/Y/Z: approx. 1100mm/1000mm/4100mm.

Maszyna do formowania wtryskowego

Bettenfeld HM13000 2P

Niemcy

2003

używany

na żądanie

INNO27325

Clamping force: 13000kN, tie bar distance X/Y: 1600mm/1250mm, installation height min./max.: 650mm/1400mm, opening stroke: 1680mm, screw diameter: 100mm, stroke volume: 3900cm³, control: Unilog B4, operating hours: 44450h. Including linear robot Bettenfeld R15, Euromap, Europaket, various interfaces, various Mouldmaster and core pulls. 1x core pull valve and flat surface nozzle defective. Documentation available.

Maszyna do druku fleksograficznego CI

Printplas 1200-6CI

Niemcy

2018

używany

na żądanie

INNO27322

Number of colors: 6, film passage width: 1250mm, print width: 1200mm, print length min./max.: 300mm/900mm, max. print speed: 200m/min, dimensions X/Y: approx. 9000mm/3600mm. Including anilox rollers and Rossini impression cylinder sleeves with the required gears. Documentation available. An on-site inspection is possible.

Dmuchawa

Sig Corpoplast Blomax 12

Niemcy

2008

używany

na żądanie

INNO27319

A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible.

Hafciarka wielogłowicowa

Sewmaq SW-1208-45

Niemcy

2010

używany

na żądanie

INNO27316

A CNC 8-head embroidery machine from Sewmaq is available. Head interval: 400mm, embroidery area X/Y: 400mm/540mm, table size X/Y: 340mm/4210mm, weight: approx. 1250kg, control: BECS-316/366. On head no. 5, the slide bearing of the rotary hook is defective and must be replaced. Documentation available. On-site inspection is possible.

Maszyna do cięcia folii

Trapo

Niemcy

2020

używany

na żądanie

INNO27315

A film cutting machine with a handling portal from Trapo is available. Electrical components of the machine are available. However, the controls and the gripper of the handling portal are not available.

Centrum obróbcze CNC

Axa VSC 1

Niemcy

1988

używany

na żądanie

INNO27313

Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355.

Automatyczny system kontroli rentgenowskiej

Anritsu XR75

Niemcy

2018

używany

na żądanie

INNO27312

A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available.

Podnośnik próżniowy

Schmalz SCH500/EVE-TR 4

Niemcy

2012

używany

na żądanie

INNO27311

A crane with a vacuum lifter Schmalz is available. Vacuum pump: Speed: 3300 rpm, power requirement: 0.21 kW, pumping speed: 4.7 m³/h, suction pressure: 850 mbar. Crane: Load capacity: 200kg.

Zgrzewarka na gorące powietrze

Vetron Typical 5374

Niemcy

2021

używany

na żądanie

INNO27304

A Vetron Typical hot-air welding machine for continuous seam sealing is available. Heating power: 700W, max. welding speed: 12m/min, material thickness: 0.2mm/20mm, air temperature range: 20°C-600°C, air volume: 50l-450l/min, weight: approx. 50kg. Documentation available. On-site inspection is possible.

Hydrauliczny system testowy

Niehues DN200-DN600

Niemcy

2019

używany

na żądanie

INNO27302

A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000.

Śrutownica

Rösler ST 1400 PS

Niemcy

2008

używany

na żądanie

INNO27300

Blast chamber dimensions X/Y/Z: 1390mm/1070mm/740mm, blast gun: SPD 38, blast nozzle diameter- 8mm-14mm, blast nozzle air requirement (3bar): 115m³-335m³/h, pressure vessel volume: 25l, dedusting capacity: 1000m³/h, dimensions X/Y/Z: approx. 2000mm/2900mm/2600mm. Documentation available.

Kalander

Ktm RKK 230

Niemcy

2001

używany

na żądanie

INNO27299

A 2-roll thermobond calender KTM (Kleinewefers Textilmaschinen) is available. Material: PP/PES/PA/blends, material thickness min./max.: 0.5mm/3.5mm, material weight: approx. 300g-700g/m², roller surface width: 2800mm, fabric width min./max.: 1800mm/2600mm, steel roller top/bottom: 600mm/610mm, max. speed: 10m/min, heating system: thermal oil heating (250°C max.). Documentation available.

Frezarka uniwersalna

Deckel FP4MA

Niemcy

1990

używany

na żądanie

INNO27298

Travel X/Y/Z: 500mm/400mm/400mm, table dimensions X/Y: 800mm/460mm, speed: 2500rpm, spindle mount: SK40/M16, feed: 630mm/min, rapid traverse: 1300mm/min. Dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 1500kg, control: Grundig Contour 2, documentation available. On-site inspection is possible.

Magazyn palet

J. Horstmann PALMA 812

Niemcy

2014

używany

na żądanie

INNO27295

A J. Horstmann pallet magazine is available. Pallet type: Euro pallets, pallet dimensions X/Y: 1200mm/800mm, number of pallets: 15, documentation available. On-site inspection is possible.

Prasa dziurkująca

Edel Stanzprofi 400

Niemcy

nieznany

używany

na żądanie

INNO27294

Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps.

Szlifierka taśmowa

Heesemann LSM8-S

Niemcy

2004

używany

na żądanie

INNO27291

A 5-roller Heesemann wood sanding machine is available. Sanding belt dimensions: 2620 x 1350mm, sanding width: 1300mm, working height: 1000mm, roller diameter: 250mm, belt speed: 24m/s, suction volume: 89.5m³/min, suction nozzle diameter: 250mm + 180mm, air speed: 20m/s. Dimensions X/Y/Z: approx. 5200mm/2300mm/2300mm, weight: approx. 13000kg. Documentation available. On-site inspection is possible.