Maszyny Uzywane Niemcy - Innovac GmbH

Spawarka ramowa

Mla M 12

Niemcy

2006

używany

na żądanie

INNO27761

Power: 1.5kW, materials: plastic/aluminum, intended use: welding and machining processes, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1800mm, weight: approx. 150kg. Including accessories. On-site inspection is possible.

więcej

Dmuchawa

Claudius Peters GMB15.11

Niemcy

1980

używany

na żądanie

INNO27760

Two identical Claudius Peters industrial blowers are available. Power: 97.2kW, speed: 1680rpm, flow rate: 58.2m³/min, pressure: 1bar, secondary pressure: 0.8bar, pressure difference: 800mbar. On-site inspection is possible.

więcej

Wieża chłodnicza

Karlsruhe (gohl-ktk) K 18-28-3

Niemcy

2002

używany

na żądanie

INNO27759

Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

więcej

Stacja transformatorowa

Scheidt/abb/areva BEK250/420

Niemcy

2007

używany

na żądanie

INNO27753

A two-part Sheidt transformer station with two transformers is available. Rated power per transformer: 630kVA. Documentation available. On-site inspection is possible.

więcej

Transformator mocy

Gräper GA 450/330

Niemcy

1994

używany

na żądanie

INNO27752

Transformer Heim, rated power: 400kVA, primary voltage: 10kV, insulation medium: oil-cooled, switchgear: medium voltage, cooling type: ONAN, cable connections: Medium voltage/low voltage, Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3500mm, Weight: approx. 15000kg-20000kg. Documentation available. On-site inspection is possible.

więcej

Rozdrabniacz

Rapid 8045-KU

Niemcy

1994

używany

na żądanie

INNO27751

Motor power: 37kW, rotor diameter: 500mm, rotor width: 790mm, cross-section: approx. 500mm/790mm, stator blades: 2-row, rotor: 6 blades left and right. Including cyclone, pipes, blower, 3 sets of knives and sieves with a diameter of 6mm/8mm/10mm. Grinding capacity: 6 sieve: 150kg/h, 8 sieve: 300kg/h, 10 sieve: 400kg/h. Documentation available. On-site inspection is possible.

więcej

Linia do powlekania

Dage Prima V7

Niemcy

2013

używany

na żądanie

INNO27750

Basket dimensions X/Y/Z: 300mm/250mm/200mm, bath capacity: 52l/80kg, European card throughput: approx. 280/h, machine dimensions X/Y/Z: approx. 1000mm/750mm/1050mm. Including automatic drain, fill level monitoring, cooling zone, collection container for water/solvent: 0.5l/5l. Inspection of the cooling system is necessary. Documentation available. On-site inspection is possible. Expected to be available from mid-October 2024.

więcej

Tokarka

Weipert W500

Niemcy

1972

używany

na żądanie

INNO27749

Rotation diameter over bed: 530mm, turning length: 800mm, center distance: 1000mm, bore: 63mm, max. quill adjustment: 225mm, speed: 900rpm, spindle power: 15kW. Machine dimensions X/Y/Z: approx. 2700mm/1400mm/1300mm, weight: approx. 3300kg. Documentation available. On-site inspection is possible.

więcej

Tokarka

Schaerer UD 500

Niemcy

1965

używany

na żądanie

INNO27748

Swing diameter over bed/face slide: 520mm/310mm, max. center distance: 3000mm, spindle bore: 62mm, taper diameter: 70mm, three-jaw chuck clamps up to: 315mm, wheel width: 68mm, wheel diameter: 168mm/200mm, spindle power: 20kW, machine dimensions X/Y/Z: approx. 5000mm/1300mm/1300mm, weight: approx. 4000kg. The lathe has been converted for knurling, so normal turning work is not possible. Documentation available. On-site inspection is possible.

więcej

Cela spawalnicza robota

Reis TYPRV20-16-RSVI

Niemcy

2015

używany

na żądanie

INNO27746

Welding robot: RV20-16 with turntable, welding source: Merkle High Pulse 551 RS, positioner: integrated welding positioner, cabin equipment: double station with high-speed doors, welding type: MIG/MAG welding. Machine dimensions X/Y/Z: approx. 3800mm/2400mm/2200mm, weight: approx. 3750kg. Including all available tools, spare parts and accessories. Documentation available. On-site inspection is possible.

więcej

Maszyna do formowania wtryskowego

Krauss Maffei KM 110-380 CX

Niemcy

2011

używany

na żądanie

INNO27745

Clamping force: 1100kN, tie bar clearance: 470mm/470mm, opening stroke: 1000mm, min. mold installation height: 300mm, screw diameter: 40mm, specific injection pressure: 1860bar, max. stroke volume: 201cm³, connected load: 30kW, control: MC5. Machine dimensions: 4600mm/2650mm/2250mm, machine weight: 8t, operating hours: 57,020h. Available from December 2024, including special accessories, Krauss Maffei LRX 100, 6x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, separator flap, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available.

więcej

Maszyna do formowania wtryskowego

Krauss Maffei KM 250-1400 C1

Niemcy

2002

używany

na żądanie

INNO27744

Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available.

więcej

Wyciskanie na zimno

Dr. Fritsch KP 35

Niemcy

2000

używany

na żądanie

INNO27741

A high-performance cold press is available for pre-pressing diamond segments in tools. Main cylinder: 2, cylinder diameter top/bottom: 100mm/100mm, cylinder stroke top/bottom: 180mm/150mm, max. operating pressure: 300bar, press force: 235kN. Die clamping cylinder: 2, piston diameter: 63mm, cylinder stroke: 15mm, max. clamping force: 62kN, max. operating pressure: 200bar, piston area: 31.2cm². Weighing stations: 2, weight range: 1g-50g, accuracy: +/-0.05g, powder hopper volume: 12l. Machine dimensions X/Y/Z: approx. 1800mm/1000mm/1900mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

więcej

Maszyna do formowania próżniowego

Geiss DU 2400 x 1200 T9

Niemcy

2011

używany

na żądanie

INNO27738

Max. mold dimensions X/Y: 2400mm/1200mm, max. plate dimensions X/Y: 2350mm/1150mm, max. mold installation height: 900mm, total connected load: 285.3kW, rated operating current: 413A, heating capacity top + bottom: 277.7kW, air consumption: 1600l/cycle. Machine dimensions X/Y/Z: approx. 4500mm/4700mm/4700mm, weight: approx. 12500kg, control: Siemens with OP 35, documentation available. On-site inspection is possible.

więcej

Tokarka CNC

Mazak SQT 25 MS

Niemcy

1999

używany

na żądanie

INNO27737

Turning diameter: 300mm, turning diameter: 525mm, turning length: 550mm, spindle bore: 76mm, max. bar diameter: 64mm, max. chuck diameter: 250mm. Spindle speed: 4000rpm, spindle power: 22kW, max. spindle torque: 351Nm, spindle nose-turret face distance: 115mm-690mm. Tool slots: 12, shank diameter: 25mm, drill shank diameter: 40mm, max. turret indexing time: 0.2s-0.6s. Traverse path X/Z/counter spindle: 190mm/575mm/585mm, rapid traverse X/Z: 30m/min, rapid traverse C: 400rpm, rapid traverse B: 18m/min, C-axis swivel: 360°. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2500mm, weight: approx. 6000kg, control: PC Fusion CNC 640T, operating hours: approx. 5000h. Without bar loader, Rotaryscale defective. Documentation available. On-site inspection is possible.

więcej

Szlifierka do powierzchni CNC

Stöckel FNX 850 Z NC-T

Niemcy

2020

używany

na żądanie

INNO27736

A CNC profile and surface grinding machine Stöckel is available. Travel X/Y/Z: 850mm/680mm/475mm, guide X/Y/Z: sliding guide/linear guide/linear guide, table dimensions X/Y: 800mm/500mm, table feed: 30m/min, drive X/Y/Z: Toothed belt/ball screw/ball screw, feed: Y/Z: 2000mm/min, fine adjustment X/Y/Z: from 0.001mm, speed: 4000rpm, spindle taper: 60mm, spindle power: 11kW, grinding wheel dimensions X/Y/Z: 400mm/50mm/127mm. Machine dimensions X/Y/Z: approx. 3500mm/2700mm/2300mm, weight: approx. 4300kg, operating hours: 16156h, control: NC-T. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Mazak VTC 200 C

Niemcy

2002

używany

na żądanie

INNO27735

Travel X/Y/Z: 1660mm/510mm/510mm, rapid traverse X/Y/Z: 36m/min, speed: 12000rpm, spindle mount: ISO40, spindle power: 18.5kW, table spindle nose distance: 180mm-690mm, table dimensions X/Y: 2000mm/510mm, tool slots: 30, max. tool diameter: 120mm, max. tool length: 350mm, control: Mazatrol PC-Fusion-CNC 640M. Including tool length measuring device and center wall separation. Documentation available. On-site inspection is possible.

więcej

Szlifierka narzędziowa CNC

Michael Deckel S20 Turbo

Niemcy

2011

używany

na żądanie

INNO27729

Travel X/Y/Z: 340mm/240mm/240mm, max. workpiece diameter: 250mm, max. workpiece length: 500mm, speed: 3000rpm, spindle power: 7kW, machine dimensions X/Y/Z: approx. 1800mm/2000mm/2200mm, weight: approx. 2200kg, control: PMAC. Including 6-fold grinding wheel changer, chain loader S20 E for 41 workpieces and filter system Indusa ELN 1000 NS, year of manufacture: 2022. Documentation available. On-site inspection is possible.

więcej

Szlifierka narzędziowa CNC

Schütte WU 305

Niemcy

2005

używany

na żądanie

INNO27728

Axes: 5, sanding length: 330mm, max. workpiece diameter: 235mm, travel X/Y/Z: 400mm/250mm/250mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/1900mm, weight: approx. 2800kg, control: Siemens Sinumerik 840D, operating hours: approx. 22000h. Documentation available. An on-site inspection is possible.

więcej

Automatyczna piła taśmowa

Meba ECO 320 GA

Niemcy

1999

używany

na żądanie

INNO27727

Round cutting range 90°/45°/30°: 320mm/300mm/200mm, flat cutting range 90°/45°/30°: 500mm x 300mm/300mm x 300mm/200mm x 200mm, bundle tensioning range X/Y: 300mm/300mm, material infeed single/multiple: 600mm/6000mm, offcut lengths manual/automatic/automatic with bundle tensioning: approx. 70mm/120mm/270mm. Cutting speed: 70m/min, lowering speed: 300mm/min, saw blade length: 4200mm, saw blade width: 27mm, saw blade thickness: 0.9mm, saw blade tension: 45Nm. Machine dimensions X/Y/Z: approx. 2230mm/2100mm/1280mm, weight: approx. 1220kg. The machine shows a slight deformation of the cut at higher feed speeds. Documentation available. An on-site inspection is possible.

więcej