Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [721 - 740 of 2480]

Maszyna do formowania wtryskowego

Arburg 420C 1500

Niemcy

1999

używany

na żądanie

INNO27341

Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg 420C 1000

Niemcy

2013

używany

na żądanie

INNO27340

Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg 370S 600-100

Niemcy

2012

używany

na żądanie

INNO27339

Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg 270S 350-100

Niemcy

2012

używany

na żądanie

INNO27338

Installation height min./max.: 200mm/550mm, opening stroke: 350mm, closing force: 350kN, screw diameter: 20mm, distance between tie bars: 270mm, max. injection volume: 31cm³, operating hours: 61737h. Documentation available. On-site inspection is possible.

Maszyna do szycia

Brother KE 430C

Niemcy

nieznany

używany

na żądanie

INNO27336

Stitch type: lockstitch, needle type: single needle, thread type: single thread, max. sewing speed: 2700stitches/min, max. sewing field size: 40mm/30mm, stitch length min./max.: 0.05mm/12.7mm, needle system: 134 staple lift, weight: 60kg. Documentation available.

Maszyna filtrująca

Omodei & Mena KFP 470/II

Niemcy

nieznany

używany

na żądanie

INNO27334

An Omodei & Mena yeast, grape and diatomaceous earth filter is available. Number of plates: 32, plate format: 500mm/500mm, thread: NW32, max. pressure: 1000bar. Including dry run protection.

Dwuwrzecionowe centrum obróbcze CNC

Stama MC 536

Niemcy

2009

używany

na żądanie

INNO27333

Travel X/Y/Z: 2200mm/520mm/510mm, rapid traverse X/Y/Z: 40m/min, number of spindles: 2, speed: 10000rpm, spindle power: 22kW, spindle bearing: 95mm, max. torque: 300Nm, tool holder: HSK A100, max. milling capacity: 500cm³, max. drilling diameter: 50mm, max. thread diameter: M36. Table dimensions X/Y: 2x 1250mm/250mm, spindle table distance min./max.: 250mm/760mm, max. workpiece weight: 2x 1500kg, max. tool length: 320mm, tool positions: 2x 21, tool clamping: 45000N. Dimensions X/Y/Z: approx. 4000mm/6500mm/3800mm, weight: approx. 11000kg, operating hours: 37771h. Including sheet metal technology SHA KMB 900, volume: 900l, and magnetic plate. Documentation available.

Teleskopowa platforma robocza

Haulotte STAR 10

Niemcy

2015

używany

na żądanie

INNO27331

Working height: 10m, platform height: 8m, horizontal reach: 3m, platform load capacity: 200kg, platform dimensions X/Y: 780mm/980mm, turning circle: 1880mm, wheelbase: 1200m, ground clearance: 100mm. Extension swivel range: -60°/+70°, hydraulic system capacity: 7l, climbing ability: 23%, drive speed: 5km/h, turntable rotation: 345°, tilt alarm: 3°, maximum permissible manual force/wind speed: 400N(40kg)/12.5m/s(45km/h). Dimensions X/Y/Z (folded): Approx. 2700mm/1000mm/2000mm, Weight: approx. 2800kg. Documentation available. One defect is present (in need of repair).

Nożyce gilotynowe

Hanseatic HS 5/2550

Niemcy

1991

używany

na żądanie

INNO27330

Working width: 2550mm, max. sheet thickness: 5mm, max. power: 7.5kW, dimensions X/Y/Z: approx. 2060mm/3180mm/1400mm, weight: approx. 4200kg. On-site inspection is possible. Available from January 2025

Nożyce gilotynowe

Franz Kramer TM IA 2000/3,25

Niemcy

1970

używany

na żądanie

INNO27329

Working length: 2000mm, max. sheet thickness: 3.25mm, table width: 300mm, side stand projection: 100mm, table/knife bar stop adjustment: 1000mm/550mm, drive power: 5.5kW. Dimensions X/Y/Z: approx. 2300mm/800mm/1500mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible. Available from January 2025.

Centrum obróbcze CNC

Mori Seiki SH-50

Niemcy

1996

używany

na żądanie

INNO27327

Travel X/Y/Z: 630mm/600mm/650mm, table dimensions X/Y: 500mm/500mm, max. table load: 500kg, speed: 12000rpm, max. workpiece diameter/height: 730mm/700mm, feed: 16m/min, rapid traverse: 32m/min. Tool holder: BT40, tool positions: 60, max. tool diameter: 100mm, max. tool weight: 12kg, max. tool length: 360mm. Dimensions X/Y/Z: approx. 6000mm/3500mm/3500mm, weight: approx. 14000kg, control: MSC-516 MB. Documentation available.

System przenośników

Profipack Gebinde- Höhenförderer

Niemcy

2009

używany

na żądanie

INNO27326

Two identical Profipack container height conveyors are available. Capacity: 25 cycles/min for 6, 8 and 12 packs, dimensions X/Y/Z: approx. 1100mm/1000mm/4100mm.

Maszyna do formowania wtryskowego

Bettenfeld HM13000 2P

Niemcy

2003

używany

na żądanie

INNO27325

Clamping force: 13000kN, tie bar distance X/Y: 1600mm/1250mm, installation height min./max.: 650mm/1400mm, opening stroke: 1680mm, screw diameter: 100mm, stroke volume: 3900cm³, control: Unilog B4, operating hours: 44450h. Including linear robot Bettenfeld R15, Euromap, Europaket, various interfaces, various Mouldmaster and core pulls. 1x core pull valve and flat surface nozzle defective. Documentation available.

Kuter

Krämer & Grebe SM200

Niemcy

1990

używany

na żądanie

INNO27323

Volume: 200l, dimensions X/Y/Z: approx. 2900mm/2500mm/1600mm. On-site inspection is possible.

Maszyna do druku fleksograficznego CI

Printplas 1200-6CI

Niemcy

2018

używany

na żądanie

INNO27322

Number of colors: 6, film passage width: 1250mm, print width: 1200mm, print length min./max.: 300mm/900mm, max. print speed: 200m/min, dimensions X/Y: approx. 9000mm/3600mm. Including anilox rollers and Rossini impression cylinder sleeves with the required gears. Documentation available. An on-site inspection is possible.

Dmuchawa

Sig Corpoplast Blomax 12

Niemcy

2008

używany

na żądanie

INNO27319

A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible.

Hafciarka wielogłowicowa

Sewmaq SW-1208-45

Niemcy

2010

używany

na żądanie

INNO27316

A CNC 8-head embroidery machine from Sewmaq is available. Head interval: 400mm, embroidery area X/Y: 400mm/540mm, table size X/Y: 340mm/4210mm, weight: approx. 1250kg, control: BECS-316/366. On head no. 5, the slide bearing of the rotary hook is defective and must be replaced. Documentation available. On-site inspection is possible.

Maszyna do cięcia folii

Trapo

Niemcy

2020

używany

na żądanie

INNO27315

A film cutting machine with a handling portal from Trapo is available. Electrical components of the machine are available. However, the controls and the gripper of the handling portal are not available.

Centrum obróbcze CNC

Axa VSC 1

Niemcy

1988

używany

na żądanie

INNO27313

Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355.

Automatyczny system kontroli rentgenowskiej

Anritsu XR75

Niemcy

2018

używany

na żądanie

INNO27312

A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available.