Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [41 - 60 of 2444]

Szlifierki do wałków CNC

Studer S 30 Lean Pro

Niemcy

2002

używany

na żądanie

INNO28619

Center width: 1000mm, center height: 175mm, max. workpiece weight: 130kg, grinding diameter: 350mm, grinding length: 1000mm, grinding wheel diameter: 400mm/500mm, grinding wheel width: 80mm, internal grinding spindle speed: 20000rpm. Machine dimensions X/Y/Z: approx. 3700mm/2200mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 16-T, operating hours: approx. 121855h. The electronics of the machine cause some problems. Documentation available. On-site inspection is possible.

Maszyna licząca

King TB4

Niemcy

2006

używany

na żądanie

INNO28618

Counting capacity: tablets: 2600/h, capsules: 800/h, containers: 30/h, batch capacity: 10000 units, material: stainless steel. Machine dimensions X/Y/Z: approx. 900mm/700mm/660mm, weight: approx. 40kg. Documentation available. On-site inspection is possible.

Kompaktowa jednostka obkurczająca

Italdibipack Espert 2N

Niemcy

2014

używany

na żądanie

INNO28617

Tunnel dimensions X/Y: 420mm/240mm, welding frame dimensions X/Y: 500mm/400mm, max. roll width: 600mm, max. product height: 150mm, tunnel length: 700mm, machine dimensions X/Y/Z: approx. 2400mm/900mm/1550mm, weight: approx. 300kg. Documentation available. On-site inspection is possible.

Wózek widłowy

Heli/jungenheinrich/linde CPOD25H/EJC Z16/L 14

Niemcy

2010

używany

na żądanie

INNO28616

Various gas forklift trucks, electric forklift trucks and electric high-lift trucks from various manufacturers are available. 1) Heli gas forklift truck, load capacity: 2500kg. 2) Heli gas forklift truck, load capacity: 2500kg. 3) Jungheinrich electric forklift truck, load capacity: 2000kg. 4) Jungheinrich electric high-lift pallet truck, load capacity: 1600kg. 5) Electric high-lift pallet truck Linde, load capacity: 2000kg. On-site inspection is possible.

Roboty

Bosch SR6

Niemcy

nieznany

używany

na żądanie

INNO28615

Two incomplete Bosch robot systems are available. System 1 is missing the RHO 4.1 controller, system 2 is missing the drive module. Stand length: 500mm, stroke quill 1/2: 200mmx20mm/200mmx25mm, load capacity 1/2: 5kg/8kg, robot weight: approx. 50kg. Documentation available. On-site inspection is possible.

Aluminiowy separator mokry

Ventilatorenfabrik Oelde RWA315E-AL

Niemcy

2014

używany

na żądanie

INNO28614

Volume flow: 6300Bm³/h, total pressure difference: 40mbar, motor power: 11kW, speed: 3000rpm, machine weight: 400kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025.

Aluminiowy separator mokry

Ventilatorenfabrik Oelde RWA450E-AL

Niemcy

2018

używany

na żądanie

INNO28613

Volume flow: 12500Bm³/h, total pressure difference: 40mbar, motor power: 22kW, speed: 3000rpm, machine weight: 1275kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025.

Maszyna do szlifowania i polerowania cylindrycznego

Loeser RP+S 374/2

Niemcy

2016

używany

na żądanie

INNO28612

Two Loeser centerless round polishing machines are available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine with input and output table: 1000mm/1000mm. Including magazines and input and output table. Documentation available. On-site inspection is possible. Expected to be available from April 2025.

Maszyna do wyważania

Schenck Rotec HM30BU

Niemcy

2022

używany

na żądanie

INNO28611

A Schenck horizontal balancing machine is available. Bearing journal diameter: 10mm-160mm, max. workpiece weight: 700kg, max. workpiece diameter: 1260mm, max. bearing spacing width: 1330mm. Documentation available. On-site inspection is possible.

Przewracarka stosów

Krifft & Zipser E 230 RL/MZ/SO

Niemcy

2011

używany

na żądanie

INNO28610

A Krifft & Zinser pallet turning machine is available. Connected load: 24kW, machine weight: approx. 4500kg. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Starrag Heckert CWK 500

Niemcy

2006

używany

na żądanie

INNO28609

Travel X/Y/Z: 800mm/750mm/805mm, feed: 20m/min, rapid traverse: 40m/min, pallet dimensions X/Y: 500mm/500mm, max. Table load: 500kg, number of pallets: 2, rotary table: 360°, spindle speed: 10000rpm, spindle power: 37kW, tool holder: SK40, tool positions: 60, machine dimensions X/Y/Z: approx. 5800mm/5100mm/3500mm, weight: approx. 15500kg, control: Siemens Sinumerik. The coolant temperature control of the machine is defective, but a spare part is available. Documentation available. On-site inspection is possible.

Tokarka centralna

Wmw DLZ 450x1600

Niemcy

1965

używany

na żądanie

INNO28608

A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.

Frezarka CNC

Haas MiniMill HE

Niemcy

2003

używany

na żądanie

INNO28607

Travel X/Y/Z: 406mm/305mm/254mm, table dimensions X/Y: 914mm/305mm, max. table load: 227kg, spindle speed: 6000rpm, power: 6kW, tool holder: BT40, tool positions: 10, rapid traverse X/Y/Z: 15.2m/min. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Tokarka CNC

Haas SL 20 THE

Niemcy

1994

używany

na żądanie

INNO28606

Turning diameter: 262mm, turning length: 508mm, travel X/Z: 214mm/508mm, swing diameter over bed/slide: 584mm/241mm, spindle speed: 4000rpm, spindle power: 14.9kW, spindle bore: 51mm, tool positions: 10. Machine dimensions X/Y/Z: approx. 3150mm/1600mm/1850mm, weight: approx. 4100kg. On-site inspection is possible.

Maszyna do formowania wtryskowego

Demag ERGOtech pro 500-270

Niemcy

1999

używany

na żądanie

INNO28604

Clamping force: 500kN, tie bar distance X/Y: 355mm/355mm, platen dimensions X/Y: 540mm/540mm, min. mold height: 210mm, max. opening stroke: 400mm, max. platen distance: 610mm. Screw diameter: 35mm, injection weight: 144cm³, injection pressure: 1890bar. Machine dimensions X/Y/Z: approx. 3600mm/1200mm/1800mm, weight: approx. 2500kg. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Demag Extra 50-310

Niemcy

2004

używany

na żądanie

INNO27913

Clamping force: 500kN, tie bar spacing: 355mm, plate dimensions X/Y: 520mm/520mm, minimum mold installation height: 210mm, opening stroke: 400mm, maximum plate distance: 610mm, ejector force: 41kN, ejector stroke: 150mm. Screw diameter: 30mm, stroke volume: 106cm³, injection pressure: 1990bar, heating zones: 4. Machine dimensions X/Y/Z: approx. 3800mm/1200mm/1800mm, weight: approx. 2800kg, control: CDIAS. Documentation available. On-site inspection is possible. Without attachments and removal robot.

Maszyna do formowania wtryskowego

Haitian MA1600

Niemcy

2010

używany

na żądanie

INNO27914

Clamping force: 1600kN, screw diameter: 40mm, injection weight: 230g, injection volume: 412cm³, tie bar spacing: 470mm, plate dimensions X/Y: 720mm/720mm, opening stroke: 520mm, max. mold height: 570mm, injection pressure: 180MPa, connected load: 33.65kW. Length: approx. 5450mm, weight: approx. 5500kg. Documentation available. On-site inspection is possible. Without attachments and removal robot.

Centrum obróbki szkła CNC

Bottero Discovery 770DMW

Niemcy

2013

używany

na żądanie

INNO28603

A horizontal CNC double-spindle drilling and milling center for glass Bottero is available. Glass thickness range: 3mm-19mm, max. workpiece dimensions X/Y: 1600mm/2600mm, min. workpiece dimensions X/Y: 100mm/350mm, max. bore diameter: 70mm, tool positions: 16+16, spindle speed top: 10000rpm, spindle speed bottom: 6000rpm, speed Z/Y: 6m/20m/min, glass sheet feed: 20m/min, working height: 990mm (+/-20mm), machine weight: approx. 5500kg. Documentation available. On-site inspection is possible.

Frezarka uniwersalna CNC

Maho MH 600C

Niemcy

nieznany

używany

na żądanie

INNO28602

Travel X/Y/Z: 600mm/400mm/500mm, speed: 5000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 3900mm/2900mm/2000mm, weight: approx. 3600kg, control: Maho CNC 432, operating hours: 47333h. On-site inspection is possible.

Kabina lutownicza

Pötter PK-IAT-L 1400

Niemcy

2011

używany

na żądanie

INNO28601

A soldering booth including extraction is available. Documentation available. On-site inspection is possible.