Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [301 - 320 of 2499]

Prasa do klejenia

Andritz PM-3600

Niemcy

2006

używany

na żądanie

INNO28139

An Andritz gluing press for the interlocking connection is available. Press dimensions X/Y: 200mm/3850mm, upper press temperature: 175°C, operating pressure: 0.6bar, pressing time: 20min, cooling temperature before dismantling: 50°C, total weight: approx. 900kg. The machine was rebuilt so that it only consists of 2 individual parts and can be moved with a forklift. The dismantled components of the machine (control, pump, etc.) are still present. Documentation available. On-site inspection is possible.

Chłodnia

Johnson Controls/sabroe ChillPAC 108 LV

Niemcy

2019

używany

na żądanie

INNO28138

A Johnson Controls/Sabroe cold storage room with two LP-ChillPAC 108LV chillers is available. Refrigerant: R717, charge weight: 2x120kg, cooling capacity: 2x310kW, pressure unit volume: 4510l. Low pressure side: max. operating pressure: 16bar, test pressure: 17.6bar, operating temperature min./max.: -30°C/+40°C. High pressure side: max. operating pressure: 22bar, test pressure: 24.2bar, operating temperature min./max.: 0°C/+150°C. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Matsuura Cublex-63

Niemcy

2010

używany

na żądanie

INNO28137

Travel X/Y/Z: 760mm/845mm/660mm, A-axis: -125°/+10°, C-axis: 360°, number of pallets: 3 square and 2 round, pallet diameter: 630mm, max. workpiece diameter: 630mm, max. workpiece height: 450mm, max. workpiece weight: 350kg. Speed: 12000rpm, spindle mount: HSK-A63W, spindle power: 22kW. Tool positions: 160, tool magazine: matrix magazine, rapid traverse X/Y/Z: 60m/min, rapid traverse A/C: 25rpm / 220rpm. Machine dimensions X/Y: approx. 7700mm/4000mm, weight: approx. 15000kg, control: Siemens 840 DI. Including Renishaw OMP60, Blum laser measuring system, cooling water recooler with heating function. Tool magazine is defective, therefore only half of the slots can be used. Documentation available. On-site inspection is possible.

Maszyna do worków rurowych pionowych

Bosch SVB 2501 A/SVB 3601 L

Niemcy

1996

używany

na żądanie

INNO28135

Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025.

Centrum obróbcze CNC

Dmg Mori NHX 4000

Niemcy

2017

używany

na żądanie

INNO28134

Travel X/Y/Z: 560mm/560mm/660mm, clamping surface: 400mm/400mm, spindle mount: HSK-A63, speed: 20000rpm, power: 25kW/35kW, torque: 130Nm/86Nm. Work table indexing: 0.001°, speed: 100 rpm. Tool positions: 40 + 60, ring magazine holder: BT40/SK/CAT40/HSK-A63, max. tool diameter: 70mm, max. tool length: 450mm, max. tool weight: 12kg. Including cooling lubricant system, chip conveyor, IKZ, filter system, oil mist separator and flow monitor. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/3000mm, weight: approx. 9500kg, control: CELOS with Siemens 840D sl Operate, operating hours: 41220h, spindle hours: 21663h. Documentation available. On-site inspection is possible.

Tokarka rewolwerowa CNC

Gildemeister Sprint 65 3T

Niemcy

2015

używany

na żądanie

INNO28133

Main spindle: max. bar capacity: 65mm, drawtube bore: 76mm, collet chuck diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm h5, speed: 5000rpm, torque: 150Nm, power: 22kW. Counter spindle: drawtube bore: 52.5mm, diameter of collet holder: 160mm, diameter of centering chuck: 175mm, spindle nose: 140mm h5, speed: 5000rpm, torque: 86Nm, power: 18kW. Travel X1/Y1/Z1: 165mm/40mm/300mm, travel X2/Y2/Z2: 165mm/40mm/640mm, travel Z3: 640mm. Tool positions: 12, tool holder: VDI 30 + TRIFIX. Machine dimensions X/Y/Z: approx. 6900mm/1700mm/2650mm, weight: approx. 10300kg, control: Siemens 840D SL, operating hours: 40540h, spindle hours: 26556h. Including automatic parts unloading, tool slide turret, pneumatic unit, coolant system, hydraulic system and lubrication system. Automatic parts unloading IRCO MUK 7012-II, year of manufacture: 2014, total conveyor path: 6m, conveyor width: 100mm, conveyor speed: 10m/min, max. load including pallet and product: 1.5kg. Documentation available. On-site inspection is possible.

Drukarka atramentowa ciągła

Videojet Ink Jet 1580

Niemcy

nieznany

używany

na żądanie

INNO28132

Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible.

Prasa ekscentryczna

Ebu H75F

Niemcy

nieznany

używany

na żądanie

INNO28131

Pressing force: 750kN, throat depth: 300mm, stroke adjustment: 16mm-140mm, ram adjustment: 80mm, stroke rate: 105/min, motor power: 4kW, table dimensions X/Y: 800mm/600mm, table height: 845mm, machine dimensions X/Y/Z: approx. 1700mm/1200mm/2500mm, weight: approx. 4200kg. The machine has had a crack for years, but this does not affect the stability or the UVV test. Documentation available. On-site inspection is possible.

Klejarka

Meyer RPS L-400/RPS L-600

Niemcy

2015

używany

na żądanie

INNO28130

Two Meyer fusing machines are available for the textile industry. 1) Fusing machine Meyer RPS L-400, year of manufacture: 2015, fusing width: 400mm, connected load: 3.3kW, belt speed range: 1m-9m/min, max. pressing pressure: 50N/cm², max. temperature: 200°C, machine dimensions X/Y/Z: approx. 1700mm/900mm/450mm, weight: approx. 150kg. 2) Fusing machine Meyer RPS-L, year of manufacture: 2002, fusing width: 600mm, max. temperature: 200°C, belt speed range: 1m-9m/min, connected load: 5kW, max. pressing pressure: 35N/cm², machine dimensions X/Y/Z: approx. 1700mm/1100mm/450mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

Kontener biurowy

Niemcy

nieznany

używany

na żądanie

INNO28129

An office container is available. Internal length: 4600mm, internal width: 2900mm, area: 13.35m². An on-site inspection is possible.

Wiertarka słupowa

Donau Alpha

Niemcy

2010

używany

na żądanie

INNO28128

Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Coastone Cone 1600

Niemcy

nieznany

używany

na żądanie

INNO28127

Pressing force: 440kN, working width: 1600mm, cylinder stroke: 150mm, travel X/R: 400mm/200mm, adjustment speed R-axis: 200mm/s, installation height: 400mm, throat depth: 200mm, machine stand distance: 1530mm, motor power: 7.5kW, weight: approx. 2100kg. Including various accessories and tools. Documentation available. On-site inspection is possible.

Obrotnica do spawania

Reinartz Thieler 300 R

Niemcy

nieznany

używany

na żądanie

INNO28126

Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible.

Szlifierka powierzchniowa

Proth PSGS-3060AH

Niemcy

1987

używany

na żądanie

INNO28125

Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Piła taśmowa

Jaespa MSP-4

Niemcy

1990

używany

na żądanie

INNO28124

A Jaespa vertical metal band saw, filing, grinding and polishing machine is available. Roller diameter: 420mm, cutting height: 280mm, cutting width: 405mm, cutting speed: 25m-280m/min, table dimensions X/Y: 600mm/600mm, table inclination left/right: 15°/45°, working height: 955mm, saw blade length range: 3200mm-3400mm, drive power: 1.5kW. Machine dimensions X/Y/Z: approx. 1250mm/1000mm/2050mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

Frezarka CNC

Hedelius C60S-1200

Niemcy

2008

używany

na żądanie

INNO28122

Traverse path X/Y/Z: 1200mm/620mm/520mm, clamping surface X/Y: 1550mm/600mm, tool holder: SK40, tool positions: 30, spindle speed: 10000rpm, spindle power: 18.5kW, rapid traverse: 45m/min, max. table load: 2000kg, machine dimensions X/Y/Z: approx. 6300mm/2600mm/3400mm, weight: approx. 10500kg, control: Heidenhain iTNC 530, control hours: 2000kg. Table load: 2000kg, machine dimensions X/Y/Z: approx. 6300mm/2600mm/3400mm, weight: approx. 10500kg, control: Heidenhain iTNC 530, control hours: 84857h, machine hours: 52336h, program hours: 19520h, spindle hours: 15928h. Documentation available. On-site inspection is possible. Expected to be available from Q1 2025.

Szlifierki do wałków CNC

Gp CNC 650

Niemcy

2012

używany

na żądanie

INNO28121

A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible.

Prasa ekscentryczna

Paul Müller/schuler/hensel ExP 25/PE 25-250/EBU 25F

Niemcy

1988

używany

na żądanie

INNO28120

Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible.

Rozdrabniacz jednowałowy

Gross GAZ 62

Niemcy

2011

używany

na żądanie

INNO28119

A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible.

Maszyna do wiercenia i wbijania kołków

Ganner Gannomat Selekta

Niemcy

2021

używany

na żądanie

INNO28118

A highly specialized dowel inserting machine Ganner Gannomat Selekta, mainly used in the wood and furniture industry, is available. Dowel diameter: 6mm/8mm/10mm/12mm, dowel length range: 25mm-50mm, glue pressure: 6bar, glue capacity: 5kg, water capacity: 5l, machine dimensions X/Y/Z: approx. 700mm/700mm/1100mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.