Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [201 - 220 of 2480]

Zestaw wody lodowej

Klimat/hiref RFS 18/LCE124FL

Niemcy

2010

używany

na żądanie

INNO27991

Two chillers are available. 1) Klimat S.p.A. RF/S 18, year of manufacture: 1997, compressor: H2NG094, coolant: R22, coolant quantity: 6.5kg, oil: Zerol 150T, oil quantity: 2.55kg, max. water pressure: 3bar, cooling capacity: 20kW, machine dimensions X/Y/Z: approx. 1800mm/900mm/1600mm, weight: approx. 400kg. 2) HiRef LCE124FL, year of manufacture: 2010, max. operating pressure: 40.5bar, ambient temperature min./max.: -10°C/45°C, coolant: R410A, cooling capacity: 45kW, machine weight: approx. 2000kg. Documentation available. On-site inspection is possible.

System dozowania

Velcorin II G B5 MID 50 C/VDT 50 L

Niemcy

2007

używany

na żądanie

INNO27990

Two Velcorin cold sterilization systems for the bevarage industry are available. 1) Velcorin II G B5 MID 50 C, year of manufacture: 2007, min./max. flow rate: 7000l/23000l/h, recommended min. beverage quantity for high dosing accuracy: 85l/h, max. directional flow rate: 504hl/h, dosing pump type: MTV 2.13/17, dosing accuracy: 20ml Velcorin/hl, sterilizing agent: dimethyl dicarbonate (DMDC, E242). Max. Beverage line pressure: 6.5bar, max. beverage line temperature: 150°C, max. power consumption: 2000VA, operating pressure: 4bar-8bar. 2) A defective Velcorin VDT 50 L. The screen and the vent screw are defective on this machine and cannot be repaired. The machine is available as a defective spare parts carrier. Both machines have touch panels. Documentation available. On-site inspection is possible.

System kontroli rentgenowskiej

Mettler Toledo X36

Niemcy

2019

używany

na żądanie

INNO27989

Max. output: 1000 products/min, compressed air connection: 550kPA, length: 2100mm, weight: 770kg. With CE declaration, operating instructions, technical manual, technical drawing, Excel spare parts list and circuit diagram. Has been regularly serviced, an on-site inspection is possible.

Owijarka do palet

Geho Basicstretch 1500

Niemcy

2013

używany

na żądanie

INNO27988

Film carriage: 2x manual via belt, column height: 2260mm, max. loading height including pallet: 2300mm, turntable diameter: 1500mm, turntable load capacity: 1500kg, turntable speed: 13.5rpm, turntable height: 76mm. Machine dimensions X/Y: 2600mm/1500mm, weight: approx. 330kg. Documentation available. On-site inspection is possible.

CNC tokarka precyzyjna

Weiler DA 260 X 1000

Niemcy

2016

używany

na żądanie

INNO27987

Center height: 260mm, center width: 1000mm, swing diameter over bed/face slide: 535mm/345mm, speed: 1500rpm. Spindle bore: 71mm, spindle diameter: 100mm, tool holder: 25mm/25mm, drive power: 7.5kW. Number of feeds: 66, longitudinal feed: 4mm/revolution, face feed: 2mm/revolution. Including Fagor numerical position indicator, 200mm Röhm lathe chuck with base and top jaws, 3x soft top jaws, 2x BD 25120 lathe tool holder, BH 32130 lathe tool holder, Röhm center punch MK5 and a set of mounting plates. Documentation available. On-site inspection is possible.

Szlifierka szerokotaśmowa

Linden Machines B.v. MC/QB-900

Niemcy

1990

używany

na żądanie

INNO27986

Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible.

Spychacz

Liebherr PR 722 BL

Niemcy

1995

używany

na żądanie

INNO27985

A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.

Wózek widłowy na paliwo

Linde H50D/H70D

Niemcy

2017

używany

na żądanie

INNO27984

There are 4 high-quality forklift trucks with diesel drive from the Linde HxxD series available. 1) Linde H50D, year of manufacture: 2015, operating hours: 17,213h, rated load capacity: 5000kg, rated working power: 85kW, weight: approx. 10,000kg. Minor technical defects and without attachment. 2) Linde H50D, year of construction: 2016, operating hours: 13,499h, rated load capacity: 5000kg, rated working power: 85kW, weight: approx. 10,000kg. Minor technical defects and without attachment. 3) Linde H50D-03, year of construction: 2020, operating hours: 10,616h, rated load capacity: 5000kg, rated working power: 85kW, weight: approx. 10,000kg. Without attachment. 4) Linde H70D, year of construction: 2017, operating hours: 8,365h, rated load capacity: 7000kg, weight: approx. 12,000kg. Without attachment. Documentation available. On-site inspection is possible. Individual sale possible.

Jednokolumnowa prasa ekscentryczna

Ambold PEEV 40.1

Niemcy

1979

używany

na żądanie

INNO27983

Pressing force: 400kN, installation height: 400mm, stroke: 44mm, max. stroke rate: 130/min, connected load: 3kW, weight: 2.7t. On-site inspection is possible.

Jednokolumnowa prasa ekscentryczna

Ambold EVSP 55

Niemcy

1986

używany

na żądanie

INNO27982

Pressing: 550kN, installation height: 380mm, stroke: 45mm, max. stroke rate: 120/min, connected load: 4.8kW, weight: 3.5t. On-site inspection is possible.

NC-pudrowa lakiernia

Wma Warsteiner Montage Und Anlagentechnik

Niemcy

2010

używany

na żądanie

INNO27980

Curing oven dimensions: 4000x21000mm. With residual moisture dryer, Gema powder device, Power & Free circulating material conveyor, Weishaupt WG 20-C (100kW) and WG 30-C (239kW) gas burner. On-site inspection is possible.

NC-pudrowa lakiernia

Wma Warsteiner Montage Und Anlagentechnik

Niemcy

2003

używany

na żądanie

INNO27978

Three-chamber pre-treatment dimensions: 3600x1200x1900mm, washing entrance dimensions: 700x1500mm, manual painting booth dimensions: 800x1700mm, cycle time: 6min. With residual moisture dryer, Gema Optiflex 2 powder device, Power & Free circulating material conveyor, Weishaupt WG 20-C (100kW) and WG 30-C (239kW) gas burner. On-site inspection is possible. Available in February 2025.

Frezarka uniwersalna CNC

Deckel FP4-60

Niemcy

1999

używany

na żądanie

INNO27977

Travel X/Y/Z: 600mm/500mm/450mm, speed: 5000rpm, table dimensions X/Y: 900mm/520mm, quill stroke: 80mm, tool holder: SK40, tool positions: 20, power: 7.5kW, number of axes: 4, machine weight: approx. 4100kg, control: Dialog 12, documentation available. On-site inspection is possible.

Maszyna do cięcia z laserem CNC

Amada FLC-3015 AJ

Niemcy

2013

używany

na żądanie

INNO27976

X-axis: 3070mm, Y-axis: 1550mm, Z-axis: 100mm, max. workpiece weight: 920kg, cutting capacity VA: 0.5-4mm, steel: 0.5-4mm, aluminum: 0.5-5mm, control: AMNC/PC, connected load: 18.4kVA, length: 9300mm, width: 2900mm, height: 2000mm, weight: 12t. With laser source AJ2000 2kW, automatic material tower ASLUL300F1, LKI Wöldman, compact dust extractor and programming software. On-site inspection is possible. Available in February 2025.

Centrum obróbcze profili CNC

Tekna TK 426/3

Niemcy

1998

używany

na żądanie

INNO27975

Travel X/Y/Z: 3200mm/300mm/250mm, speed: 18000rpm, motor power: 7.4kW, tool holder: SK30, tool positions: 8, tool changer: turret, materials processed: aluminum/steel (max. 5mm thick)/PVC (steel-reinforced and unreinforced), wood and plastics. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Amada HD 1003 NT ATC ASTRO

Niemcy

2014

używany

na żądanie

INNO27974

Pressing force: 1000kN, working length: 3110mm, max. bending speed: 10mm/s, opening width: 470mm, connected load: 10kVA, length: 5980mm, width: 3075mm, height: 2915mm, weight: 10.5t, with automatic tool changer, extensive tool set (approx. 160 segments up to V6-V25), flexible backgauge, AutoToolChanger (ATC), 4 manipulators for short set-up times, servo-hydraulic drive and documentation. On-site inspection is possible. Available in February 2025.

Szlifierka do wierteł

Cuoghi Afiilatrici APE 40

Niemcy

2002

używany

na żądanie

INNO27973

Sanding range: 2mm-40mm, number of cutters: 12, head angle swivel range: 40°-180°, max. sanding disc diameter: 200mm/125mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 800mm/750mm/1300mm, weight: approx. 170kg. No concentricity of the hand-operated 6-jaw chuck, gearbox jams sporadically and the chuck jaws do not clamp the workpieces centrally. Documentation available. An on-site inspection is possible.

Frezarka narzędziowa CNC

Emco F3

Niemcy

1993

używany

na żądanie

INNO27972

Travel X/Y/Z: 300mm/200mm/250mm, feed X: 200mm/min, head swivel range: +/-90°, speed: 2200rpm, spindle stroke: 45mm, spindle mount: ISO30, throat depth: 110mm, table dimensions X/Y: 600mm/200mm, machine dimensions X/Y/Z: approx. 1300mm/1200mm/1800mm, weight: approx. 450kg. The drive motor for the X-feed is defective, the gears for the speed sometimes jump out, and the stop for the drilling depth of the quill on the milling head is broken. An on-site inspection is possible.

Frezarka CNC

Anayak VH-1800

Niemcy

1994

używany

na żądanie

INNO27971

Connected load: 38kVA, travel X/Y/Z: 2000mm/920mm/900mm, speed: 3000rpm, spindle mount: ISO50, table dimensions X/Y: 1800mm/700mm, max. table load: 3000kg, motor power: 30kW, machine dimensions X/Y/Z: approx. 4200mm/2900mm/3100mm, weight: approx. 12000kg, control: Heidenhain. Documentation available. On-site inspection is possible. Expected to be available from the end of February 2025.

Prasa

Gechter/burger SEM 70kN/DO 3

Niemcy

1990

używany

na żądanie

INNO27970

Two presses from different manufacturers are available. 1) Gechter SEM 70 KN, year of manufacture: 1990, pressing force: 70kN, type: knuckle-joint press, stroke: 5mm-62mm, max. installation height: 295mm, throat depth: 160mm, weight: approx. 350kg. 2) Two-stroke press Burger DO 3, pressing force: 3t, stroke rate: 80/min, throat: 140mm, stroke: 40mm, table dimensions X/Y: 280mm/380mm, working height: 810mm, ram surface: 115mm/100mm, machine dimensions X/Y/Z: approx. 800mm/1000mm/1400mm, weight: approx. 250kg. On-site inspection is possible.