Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [2121 - 2140 of 2852]

Tokarka i frezarka CNC

Kekeisen VFB 2000

Niemcy

2012

używany

na żądanie

INNO27282

Travel X/Y/Z: 2000mm/750mm/800mm, NC rotary table diameter: 950mm, milling head: SK50, milling head tilt: +/-90°, tool positions: 48, max. workpiece weight: 2500kg. Dimensions X/Y/Z: approx. 4000mm/3100mm/3200mm, weight: approx. 16000kg, control: Heidenhain 640. Including measuring probe M & H, 40bar IKZ, work area extraction Reven, paper belt filter Resy, brine conveyor, chip cleaning gun, wedge chuck Schink, diameter: 630mm, with various clamping jaws and other various turning and milling tools. Documentation available. On-site inspection is possible.

Prasa

Wmw KD2320

Niemcy

1971

używany

na żądanie

INNO27269

Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg.

Automatyczna maszyna do kontroli optycznej

Göpel Opticon BasicLine NP

Niemcy

2009

używany

na żądanie

INNO27266

Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available.

Podajnik płyt SMT

Feeder Rüttelfeeder/8mm-44mm

Niemcy

nieznany

używany

na żądanie

INNO27262

Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages.

Maszyna do układania

Zevatech/juki/dek FS730/FM740/TR4NEZ/265

Niemcy

1995

używany

na żądanie

INNO27261

A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by the same PC. On the screen printer, the front squeegee axis amplifier board is defective. Documentation available.

Maszyna do szycia

Pfaff/adler/global 2-Nadel

Niemcy

nieznany

używany

na żądanie

INNO27246

There are 5 sewing machines available: 1) Pfaff linking machine with elastic and 2-needle flatbed for fitted sheets, 2) Pfaff 1446 2-needle flatbed sewing machine for gathering, 3) Adler 204-4102 S beading machine, 4) Pfaff 1422 2-needle flatbed sewing machine for zippers and 5) Global LP 9226 LH-SNB 2-needle column sewing machine with double seam.

Maszyna do formowania wtryskowego

Arburg 320C 600-250/ 420C 1000-250/ 270C 300-100

Niemcy

2007

używany

na żądanie

INNO27241

Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Axa DBZ 2

Niemcy

2012

używany

na żądanie

INNO27230

Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available.

Wózek widłowy

Jungheinrich ETV 214

Niemcy

2003

używany

na żądanie

INNO27228

Load capacity: 1400kg, total width: 1270mm, overall height: 3300mm, tires: polyurethane, load center: 600mm, voltage: 48V, traction motor power: 6kW, tare weight: 2736kg, battery weight: 750kg, lifting height: 10.25m, turning radius: 1613mm, travel speed: 14km/h, operating hours: 13573h. Charger included. Documentation available.

Maszyna do formowania wtryskowego

Boy 55M

Niemcy

2005

używany

na żądanie

INNO27212

There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included.

Frezarka

Steinel BZ20

Niemcy

1982

używany

na żądanie

INNO27209

Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier.

Wiertarka do głębokich otworów

Tbt T30-1000 KTN/NC

Niemcy

nieznany

używany

na żądanie

INNO27205

Travel X/Y/Z: 700mm/300mm/1000mm, rapid traverse X/Y/Z: 4000mm/4000mm/2000mm /min, drilling method: ELB, number of drilling spindles: 1, min./max. drilling diameter: 4mm/30mm, max. drilling depth: 1000mm, table dimensions X/Y: approx. 850mm/750mm.

Pionowe centrum obróbcze CNC

Mazak AJV 60/120

Niemcy

1990

używany

na żądanie

INNO27196

Travel X/Y/Z: 3200mm/1400mm/500mm, table dimensions X/Y: 3000mm/1250mm, max. workpiece width: 1500mm. Speed: 10000rpm, spindle mount: CAT50, spindle power: 35hp, tool positions: 30, dimensions X/Y/Z: approx. 8000mm/4000mm/3500mm, weight: approx. 24000kg. On-site inspection is possible.

Frezarka CNC

Mazak FH 880

Niemcy

1997

używany

na żądanie

INNO27195

Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible.

Wiertarka rzędowa

Elu S156

Niemcy

1976

używany

na żądanie

INNO14814

Number of drilling heads: 4.

Maszyna do formowania wtryskowego

Arburg 221/55-250

Niemcy

1979

używany

na żądanie

INNO27186

Clamping force: 25kN, injection force: 5.7kN, screw motor: 12Nm, heating: 3.4kW.

Tokarka CNC

Monforts RNC 200 A

Niemcy

2000

używany

na żądanie

INNO27182

Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available.

Piec rurowy

Thermconcept ROHT 50/200/17

Niemcy

2018

używany

na żądanie

INNO27169

A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available.

Piec rurowy

Thermconcept ROK 70/500/11

Niemcy

2023

używany

na żądanie

INNO27168

A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available.

Naczynie mieszające

Hermann Rothenburg Rühr- und Mischkessel

Niemcy

1976

używany

na żądanie

INNO27157

A Hermann Rothenburg stirring and mixing vessel is available. Operating pressure vessel/jacket: 2bar/0.5bar, volume vessel/jacket: 1000l/180l, max. temperature vessel/jacket: 180°C/180°C. On-site inspection is possible.