▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Obróbka metali i obrabiarki / Wiertarki i maszyny do wiercenia

Innovac maszyny-uzywane

Wiertarki i maszyny do wiercenia [1 - 20 of 41]

Cnc wiertarka obrotowa

Rottler Portal 7000

Niemcy

nieznany

używany

na żądanie

INNO28447

Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible.

Pozioma wiertarko-frezarka CNC

Wmw BFT 90/5

Niemcy

1989

używany

na żądanie

INNO28394

Table dimensions X/Y: 1120mm/1000mm, travel X/Y/Z: 1000mm/1000mm/790mm, W-axis: 710mm, B-axis: 360°, T-slots: 7, T-slot width: 22mm, slot center distance: 140mm, mounting hole: 140H6, headstock: horizontal/non-swiveling, drive power: 17.5kW, weight: approx. 3000kg. The control of the machine has a defect which goes away after a restart. Documentation available. On-site inspection is possible.

Wiertarka kolumnowa

Alzmetall AC32AS

Niemcy

1994

używany

na żądanie

INNO28346

Drilling capacity steel/cast iron: 32mm/40mm, spindle mount: MK4, throat depth: 322mm, quill stroke: 180mm, speed: 5000 rpm, table dimensions X/Y: 500mm/370mm, column diameter: 145mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/2350mm, weight: approx. 520kg.

Wiertarko-frezarka CNC

Posalux US3600

Niemcy

2000

używany

na żądanie

INNO28308

A Posalux high-speed CNC drilling and milling machine is available as a spare parts carrier for the PCB industry. Workstations: 2, spindle type: WW1331/48, speed: 180,000 rpm, max. board dimensions X/Y: 533mm/685mm, board thickness range: 2.5mm-9mm, tool positions: 3600, machine dimensions X/Y/Z: approx. 4400mm/1850mm/1900mm, weight: approx. 6000kg, control: QNX2 CNC 3000, including workpiece DTE loader and workpiece single loader. The machine is being sold as a defective spare parts carrier. On-site inspection is possible.

Wiertarko-frezarka CNC

Posalux US6000-5

Niemcy

1997

używany

na żądanie

INNO28307

A Posalux high-speed CNC drilling and milling machine is available as a spare parts carrier for the PCB industry. Workstations: 5, spindle type: WW1331/26, speed: 180,000 rpm, max. board dimensions X/Y: 533mm/685mm, board thickness range: 2.5mm-9mm, tool positions: 6000, machine dimensions X/Y/Z: approx. 4400mm/1850mm/1900mm, weight: approx. 9000kg, control: QNX2 CNC 3000. Including automatic loading Posalux IL. The machine is being sold as a defective spare parts carrier. On-site inspection is possible.

Wiertarka promieniowa

G. Breda R 45 1210

Niemcy

1990

używany

na żądanie

INNO28290

Drilling capacity steel/cast iron: 45mm/55mm, spindle mount: Morse taper MK5, throat depth: 1210mm, quill stroke: 310mm, speed: 1250rpm, feed rate: 1.35mm/rev, spindle table distance min./max.: 525mm/1690mm, table dimensions X/Y: 1900mm/1100mm. Machine dimensions X/Y/Z: approx. 3000mm/1100mm/3000mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible.

Wiertarka słupowa

Lindner LB 14

Niemcy

1940

używany

na żądanie

INNO28214

Travel X/Y: 600mm/400mm, table dimensions X/Y: 800mm/400mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/2350mm, weight: approx. 2500kg, control: 2-axis digital readout Heidenhain (retrofitted). Including various accessories. On-site inspection is possible.

Wiertarka promieniowa

Mas VO 32

Niemcy

1992

używany

na żądanie

INNO28172

Arm length: 1000mm, max. drilling diameter steel/cast iron: 32mm/40mm, spindle stroke: 250mm, spindle holder: MK4, max. tapping capacity: M20, spindle table distance min./max.: 270mm/1040mm, table dimensions X/Y/Z: 1150mm/800mm, speed: 4500rpm. Machine dimensions X/Y/Z: approx. 1700mm/1100mm/2600mm, weight: approx. 2000kg. The emergency stop switch of the machine is defective. Documentation available. On-site inspection is possible.

Wiertarka słupowa

Donau Alpha

Niemcy

2010

używany

na żądanie

INNO28128

Drilling capacity steel/cast iron: 25mm/32mm, tapping capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500rpm, feed rate: 1050mm/min, throat range: 420mm-1320mm, cantilever travel: 900mm, column vertical travel: 430mm, quill stroke: 140mm, swivel range: 325°, table dimensions X/Y: 1200mm/600mm, drive power: 1.6kW, machine dimensions X/Y/Z: approx. 2500mm/900mm/1500mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible.

Wiertarka elektroerozyjna

Agie Charmilles Drill 11

Niemcy

2008

używany

na żądanie

INNO28096

An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible.

Wiertarka do głębokich otworów

Heyligenstaedt

Niemcy

1951

używany

na żądanie

INNO28075

A Heyligenstaedt deep-hole drilling machine is available. Speed: 1120 rpm, turning diameter: 282 mm. The wedge bar chuck is of high quality and relatively new. An on-site inspection is possible.

Wiertarka słupowa

Webo GRADUA 60

Niemcy

1973

używany

na żądanie

INNO28002

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

Wytaczarka CNC

Fritz Heckert BFT

Niemcy

nieznany

używany

na żądanie

INNO27892

Control: Heidenhain, connected load: 33kW, weight: 9.7t, with manual, rails and control cabinet. Was converted to CNC a few years ago. The machine needs to be overhauled. An on-site inspection is possible.

Wiertarka słupowa

Ixion 30

Niemcy

nieznany

używany

na żądanie

INNO27530

Four identical Ixion pillar drills are available. Drilling capacity in steel: 30mm, projection: 280mm, drilling stroke: 130mm, cone holder: MK3, speed: 1400rpm, table dimensions X/Y: approx. 550mm/400mm, connection: 1.5kW, machine dimensions X/Y/Z: approx. 1000mm/700mm/2100mm, weight: approx. 200kg.

Wiertarka promieniowa

Reform RB 50/16

Niemcy

2001

używany

na żądanie

INNO27438

Travel X/Y/Z: 1250mm/1200mm/500mm, table dimensions X/Y: 1300mm/900mm, drill diameter min./max.: 4mm/60mm, max. feed: 80m/min (aluminum with 4mm drill diameter), min. feed: 0.06mm (steel with 4mm drill diameter), machine dimensions X/Y/Z: approx. 2500mm/1000mm/3100mm, weight: 3500kg. Documentation available. On-site inspection is possible.

Wytaczarka pozioma

Tos Varnsdorf W9A

Niemcy

1981

używany

na żądanie

INNO27344

Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available.

Wiertarka rzędowa

Rüperwerk Dülken Varia 30/Gradua 30

Niemcy

nieznany

używany

na żądanie

INNO27296

A WEBO in-line drilling machine with 1x Varia 30 and 2x Gradua 30 drilling units is available. Varia 30: max. drilling diameter: 40mm, speed: 1750rpm, spindle holder: MK4. Gradua 30: max. drilling diameter: 30mm, speed: 2000rpm, spindle mount: MK3. On-site inspection is possible.

Wiertarka kolumnowa

Knuth KTB 32

Niemcy

2003

używany

na żądanie

INNO27279

Drilling diameter: 32mm, tapping capacity (steel): M24, table setup dimensions X/Y: 330mm/330mm, quill stroke: 150mm, column diameter: 100mm, throat depth: 245mm, distance spindle nose to foot/table surface: 1235mm/800mm, max table load: 50kg. Speed: 2250rpm, spindle mount: 3MT, spindle sleeve feed: 24mm-243mm/min. Dimensions X/Y/Z: approx. 900mm/600mm/1900mm, weight: approx. 300kg.

Centrum gwintujące CNC

Fanuc Robodrill Alpha-T14iA

Niemcy

nieznany

używany

na żądanie

INNO27238

Travel X/Y/Z: 500mm/380mm/300mm, table dimensions X/Y: 650mm/380mm, speed: 8000rpm, spindle taper: BT30, tool positions: 14, spindle power: 7.5PS, max. table load: 200kg. Dimensions X/Y/Z: approx. 1600mm/1900mm/2300mm, weight: approx. 2000kg, control: Fanuc Series 16i-M. Defects: Range switch of the tool changer and relay of the Z-axis brake.

Wiertarka do głębokich otworów

Tbt T60

Niemcy

nieznany

używany

na żądanie

INNO27206

Drilling diameter: 25mm-60mm, drilling depth: 1800mm, feed force: 10kN, clamping table dimensions X/Y: approx. 850mm/750mm, tool holder: HKS-A50, tool positions: 20, speed: 2900rpm, power: 15 kW. Including chip conveyor.