▷ Używane urządzenia pomiarowe i testowe z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Urządzenia pomiarowe i testowe

Inne maszyny 12 Systemy pomiarowe 12 Testowanie materiału 12 Współrzędnościowe maszyny pomiarowe 21

Innovac maszyny-uzywane

Urządzenia pomiarowe i testowe [1 - 20 of 57]

Urządzenie do badania indeksu topliwości

Göttfert 011.01.6

Niemcy

2016

używany

na żądanie

INNO28100

A Göttfert melt flow rate tester for the determination of MFR and MVR according to ASTM D1238 and ISO 1133 is available. Speed range: 0.0001-30mm/s, max. test force: 20kN, max. test temperature: 400°C, test channel diameter: 9.55mm, max. pressure: 2500bar, encoder resolution: 0.000053mm. Documentation available. On-site inspection is possible.

Maszyna do pomiaru i regulacji średnicy

Zumbach ODAC 63 Trie-JN-F + USYS 20

Niemcy

2016

używany

na żądanie

INNO27969

Measuring range X/Y/Z: 64mm/64mm/64mm, min. object diameter: 0.25mm, scanning rate: 3x1500 scans/s, laser beam width resolution: 0.02mm, repeat accuracy: +/-0.00001mm, data output rate: 333 data packets/s. USYS 20 process and display unit: Inputs: 4, Outputs: 5, Interfaces: RS-232, Ethernet TCP/IP, Acquisition and storage of measurement data: USYS Data. Documentation available. On-site inspection is possible.

Maszyna CNC do pomiaru konturów

Zeiss CONTOURCORD 1700SD3

Niemcy

2011

używany

na żądanie

INNO27885

X-axis: 200mm, Z-axis: 50mm, resolution: 0.1µm, table dimensions: 600x317mm, connected load: 670V, length: 1250mm, width: 800mm, height: 1480mm, weight: approx. 240kg. On-site inspection is possible, with documentation, accessories and software.

Współrzędnościowa maszyna pomiarowa

Keyence XM-1500

Niemcy

2018

używany

na żądanie

INNO27850

Type: 3D coordinate measuring machine (CMM), measuring range X/Y/Z: 300mm/250mm/150mm. Documentation available. On-site inspection is possible.

Maszyna pomiarowa multisensorowa

Mahr MarVision MS662

Niemcy

nieznany

używany

na żądanie

INNO27836

Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible.

Urządzenie do wstępnego ustawiania narzędzi

Tool Master/ezset SK40-Z360/4001C1

Niemcy

2009

używany

na żądanie

INNO27693

Two tool presetters, Tool Master and EZset, are available. 1) Tool Master SK40-Z360, year of manufacture: 1999, spindle mount: SK40, max. tool diameter: 160mm, max. tool length: 400mm, max. tool weight: 20kg, measuring range X/Y: 520mm/500mm, machine dimensions X/Y/Z: approx. 1200mm/800mm/1700mm, weight: approx. 500kg. 2) EZset 400C1, year of manufacture: 2009, spindle mount: SK50, max. tool diameter: 400mm, max. tool length: 400mm, measuring range X/Y: 420mm/420mm, , weight: approx. 100kg, control: ImageController1. Documentation available. On-site inspection is possible.

Urządzenie do wstępnego ustawiania narzędzi

Kelch Seca 04 E

Niemcy

2011

używany

na żądanie

INNO27629

Travel X/Z: 400mm/500mm, tool holder: SK50, machine dimensions X/Y/Z: approx. 1000mm/360mm/1130mm, weight: approx. 275kg. Including tool adapter from SK50 to SK40 and VDI40. Control defective, but can be replaced according to the manufacturer. On-site inspection is possible.

Twardościomierz

Zwick 3202

Niemcy

1969

używany

na żądanie

INNO27522

Lens magnification: 20x, aperture: 0.35, total magnification: 200x, measuring accuracy: +/-4kp/mm², average hardness value D: 144kp/mm², average thickness of reference plate: 5.9mm, max. test height: 300mm, throat depth: 135mm, machine dimensions X/Y/Z: approx. 450mm/450mm/600mm, weight: approx. 60kg. Including various lenses, clamping device for round specimens, hardness comparison plates and more. Documentation available. On-site inspection is possible.

Współrzędnościowa maszyna pomiarowa CNC

Leitz pmm 544

Niemcy

1984

używany

na żądanie

INNO27497

Measuring range X/Y/Z: 400mm/500mm/400mm, accuracy: 1.2 + L/300µm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/2750mm, weight: approx. 2000kg. Including Hexagon Metrology M00-255-300, year of manufacture: 2008, measuring head defective. Documentation available. On-site inspection is possible.

Współrzędnościowa maszyna pomiarowa CNC

Option UMC 850

Niemcy

2013

używany

na żądanie

INNO27413

Measuring dimensions X/Y/Z: 850mm/1800mm/600mm, measuring accuracy 1D/3D at 250mm: 2.5µm/3.5µm, max. workpiece weight: 2100kg, table dimensions X/Y: 1000mm/2720mm, max. rapid traverse: 65mm/s, free height: 750mm. Dimensions X/Y/Z: approx. 1600mm/2800mm/3000mm, weight: approx. 4000kg, control: Carl Zeiss, software: Calypso 5.4.24/ServicePack 6, year of manufacture: 1989, control retrofit: 2013. Documentation available. On-site inspection is possible. Available from September 2024.

System pomiaru produkcji 3D

Keyence XM-T2200

Niemcy

2018

używany

na żądanie

INNO27363

Max. measuring dimensions X/Y/Z: 600mm/300mm/200mm, repeatability: +/-3µm, display error: +/-8µm, measuring modes: program measurements/single measurements/statistical measurements. Various accessories included. Documentation available.

Automatyczny system kontroli rentgenowskiej

Anritsu XR75

Niemcy

2018

używany

na żądanie

INNO27312

A complete Anritsu X-ray system for packaged products is available. 1) X-ray unit KXS7534AVCLE: Tube voltage: 30kV-80kV, tube current: 0.4mA-3.3mA, output power: 12W-100W, detection width/height: 390mm/220mm, belt width: 420mm, belt speed: 10m/60m/min, max. belt load: 5kg, ambient temperature: 0°C-35°C, relative humidity: 30%-85%, weight: approx. 300kg. 2) Metal separator KDS450ABW: working width: 450mm, working height: 95mm. 3) Metal separator KW466CW: max. product dimensions X/Y/Z: 350mm/200mm/30mm (100mm for regular interval), max. product weight: 500g, max. output: 80 products/min. 4) Material feed through Jöst FDL 350/60x500 vibratory feeder. Documentation available.

Hydrauliczny system testowy

Niehues DN200-DN600

Niemcy

2019

używany

na żądanie

INNO27302

A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000.

Współrzędnościowa maszyna pomiarowa CNC

Tesa MH3D DCC

Niemcy

2008

używany

na żądanie

INNO27253

Measuring range X/Y/Z: 440mm/700mm/410mm, measuring uncertainty X/Y/Z: 2.5+3.9L/1000µm, probing deviation (MPEp): 3µm. Acceleration: 1730mm/s², traversing speed: 350mm/s, max. table load: 200kg, working temperature range: 19°C-21°C, operating temperature range: 13°C-35°C, air consumption: 21l/min, weight: approx. 400kg, control: Hexagon PC-DMIS. Documentation available. The coordinate measuring machine must be recalibrated.

Szerokopasmowy system pomiarowy 3D

Keyence VR-3200

Niemcy

nieznany

używany

na żądanie

INNO27193

Magnification and measuring range (with 15-inch monitor): Macro mode Horizontal/Vertical: 12x: 24mm/18mm, 25x: 12mm/9mm, 38x: 8mm/6mm, 50x: 4.5mm/3.4mm. Micro mode horizontal/vertical: 40x: 7.6mm/5.7mm, 80x: 3.8mm/2.9mm, 120x: 2.5mm/1.9mm, 160x: 1.9mm/1.4mm. Zoom: 1x-4x, measurable height wide field mode/high magnification mode: 10mm/1mm, display resolution: 0.1µm. Repeat accuracy height/width measurement: 1µm/0.5µm, Measuring accuracy height/width measurement: 2µm/5µm. Stroke X/Y/Z: 184mm/88mm/90mm, rotation: +/-180°, inclination: +/-30°, working distance: 75mm. Documentation available.

Współrzędnościowa maszyna pomiarowa CNC

Keyence VL

Niemcy

nieznany

używany

na żądanie

INNO27192

Optical transmitter system: Offset transmission type projector module, Optical receiver system: Offset dual optical module with low/high magnification, Illumination system: LEDs in 3 colors (RGB), Display light source: Blue LED. Repeat accuracy: +/-0.1μm, Measuring accuracy: +/-10μm, Measuring mode standard/fine: 4/16 million measuring points. Measuring range: low magnification diameter/height: 300mm/200mm, high magnification diameter/height: 70mm/50mm. Rotation range: 360°, stage movement X/Y: 280mm, inclination: 45°, max. weight of measuring piece: 20kg. Dimensions X/Y/Z: approx. 800mm/1000mm/900mm, weight: approx. 60kg. Documentation available.

Współrzędnościowa maszyna pomiarowa CNC

Werth Video Check IP 800 3D CNC

Niemcy

2001

używany

na żądanie

INNO27112

Measuring range X/Y/Z: 800mm/400mm/400mm, length measuring deviation: 0.1µm, repeatability: +/-0.7µm, retrofit: 2016, motor control: MoSeS V8.33.115, update: November 2016.

Współrzędnościowa maszyna pomiarowa CNC

Carl Zeiss Contura G2

Niemcy

1998

używany

na żądanie

INNO27099

Measuring range X/Y/Z: 840mm/1200mm/600mm, software: Calypso, software version: 4.4.04.01. Including various accessories. In 2004 the machine was equipped with a new control cabinet. Documentation available.

Współrzędnościowa maszyna pomiarowa CNC

Mora Mytos

Niemcy

2005

używany

na żądanie

INNO26935

Measuring range X/Y/Z: 1000mm/600mm/1000mm, measuring accuracy: ±(2.5 + L/300)µm. On-site inspection is possible.

Profilometr

Keyence VR-5200

Niemcy

2019

używany

na żądanie

INNO26798

Light sources: Observation light source: LED ring light (red, blue, green), Measurement light source: White LED, Control unit: VR-5000, Magnification (in relation to a 15-inch monitor): 12x-160x. Measuring ranges max. horizontal/vertical: 24mm/18mm, Measuring resolution: 0.1µm, Height measuring range: 1mm-50mm, Repeatability (σ): 0.4µm, Measuring accuracy: ±2.5µm.