Haspel pojedynczy

Schwabe MHM

Niemcy

nieznany

używany

na żądanie

INNO28337

Coil outer diameter: 650mm, max. sheet width: 150mm, max. coil weight: 80kg, mandrel height: 1000mm, spreading range: 230mm-445mm, support arm length: 600mm. On-site inspection is possible.

więcej

Zwijak

Wanzke PM 1000/DC-S / PMS500-DC

Niemcy

1995

używany

na żądanie

INNO27840

Two Wenzke rewinders are available. 1) Wenzke PM 1000/DC-S (heavy version), max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1995. 2) Wenzke PMS 500, max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1988. Documentation partially available. On-site inspection is possible. Individual sale possible.

więcej

Ciągarnia drutu

Koch KHZ 6300

Niemcy

1992

używany

na żądanie

INNO27758

A wire drawing plant is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 6300, year of manufacture: 1992, number of pulls per block: 1, drawing drum diameter: 700mm, pulling force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of manufacture: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Documentation available. On-site inspection is possible.

więcej

Ciągarnia drutu

Koch KHZ 5000

Niemcy

1993

używany

na żądanie

INNO27180

A wire drawing unit is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 5000, year of manufacture: 1993, number of draws per block: 1, drawing drum diameter: 700mm, drawing force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of construction: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Including hydraulic unit G13 AK. Documentation available.

więcej

Maszyna do wykrawania i gięcia

Bihler GRM-50

Niemcy

1979

używany

na żądanie

INNO24616

Three Bihler GRM-50 are available, year of manufacture: 2x 1979, 1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg.

więcej

Automatyczna maszyna do wykrawania i gięcia

Weber

Niemcy

nieznany

używany

na żądanie

INNO26514

Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.

więcej

Zaciskarka środkowa

Somavis T-8K / T-8L

Niemcy

1983

używany

na żądanie

INNO15816

There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min.

więcej

Kołowrotek

Bihler MH-2

Niemcy

1989

używany

na żądanie

INNO26067

Two Bihler reels are available, without documentation, an inspection is possible.

więcej

Maszyna spiralizująca

Spirka DW 12A

Niemcy

1998

używany

na żądanie

INNO25854

Number of coil carriers: 12, rotor speed: 450/min, coil volume: 550cm³, wire tension: 1-16N, pitch: 5-90mm, connected load: 5kVA, with documentation, is already dismantled.

więcej

Maszyna do wyżarzania oporowego

Tecno Induction

Niemcy

2016

używany

na żądanie

INNO25790

Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes.

więcej

Maszyna nawijająca

Schmidt SD20-30/7

Niemcy

1993

używany

na żądanie

INNO25776

Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools.

więcej

Maszyna do produkcji sprężyn naciągowych

Wafios Maschinenfabrik FOA 2

Niemcy

nieznany

używany

na żądanie

INNO24694

Outer spring diameter: 5-16mm, wire thickness: 0.5-1.3mm, angle ratio: 6-18, max. throughput: 65/min, with documentation.

więcej

Automat do gięcia drutu

Ghislanzoni Umberto PU4 SP

Niemcy

1981

używany

na żądanie

INNO22627

Including documentation.

więcej

Nawijarka

Rudolph & Koschinski

Niemcy

nieznany

używany

na żądanie

INNO24361

The machine is a rewinding machine for producing cables, with radial force measuring axes Honigmann, including documentation.

więcej

Maszyna do prostowania i cięcia

Wafios R31

Niemcy

1997

używany

na żądanie

INNO24128

Wire range: 3-6mm, speed: 60-80/min, max. coil weight: 1t.

więcej

Giętarka do drutu z dwoma głowicami

Amda

Niemcy

2013

używany

na żądanie

INNO22234

Also suitable for processing flat steel, including documentation, without accessories, machine was scarcely used.

więcej

Nawijarka

Rosendahl RA 7061

Niemcy

1987

używany

na żądanie

INNO21279

Max. coil weight: 10t, controls: SIEMENS S5, without documentation.

więcej

Ciągarka do drutu

Lukas DCI 11/ 50-360

Niemcy

2002

używany

na żądanie

INNO21074

Max. speed: 360m/min, power: 5.6kW.

więcej

Podwójna prasa drukarska

Chun-zu COH-10 L

Niemcy

1997

używany

na żądanie

INNO15814

Max. diameter: 12mm, shaft length: 440mm, wire section: 465mm, output: 30-40 pieces/min.

więcej

Zwijarka sprężyn skrętnych

Schenker FA-10T

Niemcy

1999

używany

na żądanie

INNO13899

There are three identical SCHENKER FA-10T available, wire diameter: 0.2-1mm, max. spring diameter: 10mm, leg length: 50mm, windings: 0-70, capacity: 8-83 pieces/min, year of construction: 1974, 1975, 1999.

więcej

Wszystkie oferty / Obróbka metali i obrabiarki / Maszyny do obróbki drutu