▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Spawanie i cięcie [1 - 20 of 87]

Komora spawalnicza

Fanuc/wig ARC Mate 100iBe/WIG 300A

Niemcy

2006

używany

na żądanie

INNO28363

A welding cell including robot and welding machine is available. Table dimensions X/Y: 1800mm/900mm, max. workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, max. reach: 1373mm, repeat accuracy: +/-0.08mm, weight: approx. 238kg. 2) Welding machine Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible.

Odciąg oparów spawalniczych

Plymovent MultiDust Collection

Niemcy

nieznany

używany

na żądanie

INNO28343

A PlymoVent welding fume extraction system is available. Compressed air tank volume: 11l, compressed air quality: class 6, operating pressure: 4bar-5bar, compressed air consumption per pulse: 40nl-50nl. Documentation available. On-site inspection is possible.

Komora spawalnicza

Kuka/smt Kr 5 arc HW/DSP2000

Niemcy

2010

używany

na żądanie

INNO28275

A welding robot with positioner and associated welding technology is available. 1) Robot Kuka KR 5 arc HW, year of manufacture: 2010, payload: 5kg, reach: 1423mm, axes: 6, repeat accuracy: +/-0.04mm, dead weight: 126kg. 2) Turn and tilt positioner SMT DSP 2000, year of manufacture: 2008, power: 12kVA, load capacity: 2000kg. Including associated welding technology. Documentation available. On-site inspection is possible. Expected to be available from September 2025.

Spawarka punktowa

Horst R. Obermark SL16/ZG

Niemcy

nieznany

używany

na żądanie

INNO28259

An Obermark spot welding gun is available. Rated power 50% duty cycle: 16kVA, connected load: 37kVA, operating current 50% duty cycle: 4.3kA, short-circuit current: 17kA, electrode force range: 17kp-278kp, weight: approx. 200kg. On-site inspection is possible.

Maszyna do cięcia laserowego CNC

Trumpf TLC 1005

Niemcy

1999

używany

na żądanie

INNO28253

A Trumpf CNC laser welding and cutting machine is available as a spare parts donor with a defective resonator. Laser power: 4kW. Documentation available. On-site inspection is possible.

Spawarka ultradźwiękowa

Branson Model 8400

Niemcy

nieznany

używany

na żądanie

INNO28249

A Branson ultrasonic welding device is available. Frequency: 20kHz, power: 900W, stroke: 100mm, clamping force at 690kPa: 1.96kN, dynamic release: 67N-734N. Documentation available. On-site inspection is possible.

Maszyna do cięcia plazmowego CNC

Sato Satronik

Niemcy

1999

używany

na żądanie

INNO28246

A Sato plasma cutting system is available. Working width: 2500mm, working length: 4000mm, material thickness range: 0.5mm-32mm, control: Satronik CNC 801, table: Satronik LS-4000, documentation available. On-site inspection is possible.

Maszyna do cięcia laserowego CNC

Esab Alpharex AXC 4kW

Niemcy

2001

używany

na żądanie

INNO28245

An ESAB laser cutting system is available. Cutting range X/Y: 3000mm/17000mm, laser power: 4kW, material thickness range: 0.5mm-20mm, laser source: Trumpf, laser cutting head: ESAB.Including bevel unit for optimum weld seam preparation. Documentation available. On-site inspection is possible.

System cięcia plazmowego

Zinser/hypertherm HPR260

Niemcy

nieznany

używany

na żądanie

INNO28244

A Zinser plasma torch cutting system is available. Table dimensions X/Y: 2000mm/6000mm, plasma attachment: Hypertherm HPR260, extraction system: Donaldson, draw channel length: 10m. Including various spare parts for the burner head. The automatic gas console is defective. Documentation available. On-site inspection is possible.

Spawarka ultradźwiękowa

Rinco UGH70-100P-230

Niemcy

nieznany

używany

na żądanie

INNO28223

A small Rinco ultrasonic welder is available. Frequency: 70kHz, peak power: 120W, continuous operating power: 100W, generator dimensions X/Y/Z: 424mm/148mm/282mm, hand welder length and diameter: 163mm/48mm, operating temperature: 10°C-50°C, storage temperature: -20°C to +70°C, protective measures: Short circuit/overload/overtemperature protection, Weight: approx. 12kg. Documentation available. On-site inspection is possible.

Komora spawalnicza

Trumpf TruArc Weld 1000

Niemcy

2022

używany

na żądanie

INNO28200

A new and automated arc welding system Trumpf including robot is available. Robot: collaborative industrial robot (Cobot) UR10e, axes: 6, reach: 1300mm, repeat accuracy: +/-0.05mm. Welding source: Fronius TPS 320i C Pulse, welding current range MIG/MAG: 3A-320A, including Cold Metal Transfer (CMT). Operating stations: 2, max. workpiece dimensions in 1-station operation: 2000mm/600mm/600mm, max. workpiece dimensions in 2-station operation: 600mm/600mm/600mm, welding table dimensions X/Y/Z: 2000mm/1000mm/100mm, cabin dimensions X/Y/Z: approx. 3600mm/2450mm/2850mm, weight including protective cabin: approx. 3000kg. Including protective cabin with glare protection, self-cleaning extraction system, linear axis for flexible robot positioning, 3D welding table with hardened surface and rotary axis for precise positioning. Documentation available. On-site inspection is possible.

Pozycjoner przedmiotu obrabianego

Bode 25VP

Niemcy

2003

używany

na żądanie

INNO28195

Load capacity: 25t, center of gravity distance: 700mm, eccentricity: 250mm, speed: 0.66rpm, tilt range: 0°-130°, tilt time: 120s, table height (flat): 1930mm, axis of rotation height: 1600mm, table diameter: 2500mm, motor power tilt/rotate: 7.5kW/4.5kW, total length: 3000mm, total width: 2500mm. Documentation available. On-site inspection is possible.

Maszyna do cięcia płomieniowego CNC

Messer Cutting MultiTherm Eco 3600

Niemcy

2021

używany

na żądanie

INNO28160

Track width: 3600mm, table dimensions: 6200x2300/ 3200x2500mm, max. workpiece thickness: 150mm, length: 10,700mm, width: 5070mm, height: 1980mm. With four oxyfuel torches, bevel cutting, segment-by-segment extraction of the areas where firing takes place, automatic gas setting (OmniFlow) for cutting oxygen (max. 15bar), heating oxygen (max. 10bar), fuel gas (max. 2bar), ALFA MS 4452/250 machine cutting torch, OmniWin2021 software. Available from February 2025, an inspection on site is possible.

Obrotnica do spawania

Reinartz Thieler 300 R

Niemcy

nieznany

używany

na żądanie

INNO28126

Load: 335mm: 3000kg, 450mm: 2400kg, 660mm: 1900kg, 825mm: 1600kg, 1110mm: 1200kg, max. turning diameter at 90°: 1600mm, speed: 1.2rpm, tilting time to 135°: 30s, gearbox: Boehringer Sturm, gearbox type: 2DA 11 oil gearbox. On-site inspection is possible.

Optyka tnąca

Trumpf F240 D40 R265

Niemcy

nieznany

używany

na żądanie

INNO28111

Still in the original packaging, has been little used. On-site inspection is possible.

Spawarka do naroży

Fröhlich/migatronic SAX700/Automig 273i

Niemcy

2018

używany

na żądanie

INNO28104

Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible.

Maszyna do cięcia strumieniem wody CNC

Stako Trium WPC

Niemcy

2016

używany

na żądanie

INNO28087

Cutting range X/Y: 3000mm/6000mm, max. oxyfuel cutting: 300mm, max. cut of unalloyed/alloyed steel: 64mm/50mm, max. cut of waterjet cutting: 100mm. Including Hypertherm HyPrecision high pressure pump. The combination of water and plasma cutting can lead to dimensional deviations. Documentation available. On-site inspection is possible.

System spawania dźwigarów kratowych

Gad RE40/R33/R31

Niemcy

2009

używany

na żądanie

INNO28062

A complete GAD lattice girder welding system with Wafios wire straightening and cutting machines is available. 1) GAD mesh welding machine, year of manufacture: 2009, mesh width: 270mm-3000mm, mesh length: 600mm-3500mm, line wire diameter: 2.5mm-8mm, line wire pitch single rod/double rod: 25mm/50mm, cross wire diameter: 2.5mm-8mm, cross wire pitch: 15mm, transformers: 3x, machine dimensions X/Y/Z: approx. 24100mm/9500mm/4700mm, weight: approx. 26500kg. 2) Wire straightening and cutting machine Wafios RE 40, year of construction: 2021, wire diameter: 3mm-10mm, cutting capacity: 120 rods/min, cutting capacity with fixed stop and continuous cut: 220 rods/min. 3) Wafios R33 wire straightening and cutting machine, year of manufacture: 2011, wire diameter: 1.5mm-7mm, cutting capacity: 160-320 cuts/min. 4) Wafios R31, year of manufacture: 1997, wire diameter: 1.5mm-7mm, cutting capacity: 160-270 cuts/min. System production capacity: approx. 1250kg/h, total system dimensions X/Y/Z: approx. 24100mm/9500mm/4700mm, weight: approx. 26500kg. All wire straightening and cutting machines including reel. Documentation available. On-site inspection is possible.

Robot do obróbki profili

Kaltenbach KC 1200

Niemcy

2010

używany

na żądanie

INNO28050

With notching robot Kuka + transport system T13 / M150, equipped with oxy-fuel torch for steel profiles, sheets, rectangular tubes. Number of axes notching system: 8, transport system infeed length set up: approx. 13.5m (1 long version still available), transport system outfeed length set up: approx. 10.0m (4 standard trestles still available), electronics for cross conveyor infeed and outfeed: completely included in the control cabinet (without cross conveyor), safety fencing: only partially set up (complete fencing available), safety light barriers: not set up (completely available). With documentation, an on-site inspection is possible.

Maszyna do cięcia laserowego CNC

Trumpf TLC 1050

Niemcy

2000

używany

na żądanie

INNO28019

Laser power: 4kW (4000W), travel X/Y/Z: 4000mm/1500mm/500mm, C-axis: 360°, table dimensions X/Y: 3000mm/1500mm, connected load: 90kVA, machine dimensions X/Y/Z: approx. 9000mm/5000mm/3000mm, weight: approx. 10000kg, laser hours: 34879h. The resonator is defective. Documentation available. On-site inspection is possible.