▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Obróbka metali i obrabiarki / Technologia powierzchniowa

Innovac maszyny-uzywane

Technologia powierzchniowa [1 - 20 of 40]

Maszyna do piaskowania

Schlick roto-jet DT 1000

Niemcy

1989

używany

na żądanie

INNO28596

Connected load: 7kW, max. workpiece diameter: 1000mm, max. workpiece height: 500mm, max. workpiece weight: 500kg, table speed: 6.8rpm, machine dimensions X/Y/Z: approx. 2600mm/1550mm/2800mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.

System czyszczący

Perkute FR 130

Niemcy

2006

używany

na żądanie

INNO28567

A Perkute Clean-o-mat front-loader spray cleaning system is available. Pump capacity: 7.5kW, heating capacity: 18kW, max. rotary basket load: 2000kg, max. compressed air: 10bar, empty weight: approx. 1000kg. On-site inspection is possible.

System czyszczący

Branson B452R

Niemcy

nieznany

używany

na żądanie

INNO24984

Heating output: 2000W, ultrasonic frequency: 40kHz, weight: 275kg.

Suszarka korytowa

Fst Drytee VE-1

Niemcy

2013

używany

na żądanie

INNO28519

Two identical Drytee drying machines are available. Useful chamber dimensions X/Y/Z: 700mm/1400mm/1150mm, external dimensions X/Y/Z: approx. 1350mm/1600mm/1800mm, heating capacity: 36kW, operating temperature: 90°C, heating medium: thermal oil, heating medium temperature: 140°C, air circulation rate: 3x5200m³/h. Documentation available. On-site inspection is possible.

System czyszczący

Höckh Lean-Concept III

Niemcy

2023

używany

na żądanie

INNO28494

An alcohol-based Höckh automatic cleaning system is available. Cleaning basket dimensions X/Y/Z: 530mm/320mm/200mm, max. batch weight: 60kg, throughput: 4-8 batches/h, number of tanks: 2, machine dimensions X/Y: 1250mm/1900mm. Cleaning process: Spray and immersion process. Documentation available. On-site inspection is possible.

Oczyszczarka strumieniowo-ścierna z przenośnikiem górnym

Wheelebrator HB 12/16-5

Niemcy

2013

używany

na żądanie

INNO28410

A Wheelabrator overhead conveyor blast machine with a Y-shaped overhead conveyor system with 2 support hooks and two integrated loading and unloading stations is available. Max. workpiece diameter: 1200mm, max. workpiece height: 1600mm, max. workpiece weight: 800kg, turbines: 2, turbine power: 11kW, turbine diameter: 380mm, fan power: 30kW, filter cartridges: 4, filter area: 13m²/cartridge. Including two Demag hoists. The sprocket and rubber seal of the system must be replaced. Documentation available. On-site inspection is possible.

Linia do powlekania

Wmv TA700

Niemcy

1996

używany

na żądanie

INNO28379

A complete WMV coating system for the surface treatment of bulk materials is available. Charging capacity: approx. 1000kg-2000kg, charging weight per partial batch: 170kg, tray dimensions X/Y/Z: 1200mm/800mm/140mm, control: Siemens S7. Components: Loading and unloading, loading system, charging system, desoldering system, crate washing system, rinsing system, drying system and washing system. One cooling system and one immersion bath are defective. The drying system was extended in 2008 for bulk solids. Documentation available. On-site inspection is possible.

System czyszczenia strumieniowo-ściernego

Modena CM T10

Niemcy

2013

używany

na żądanie

INNO28311

Effective diameter: 1000mm, effective height: 450mm, max. load: 900kg, connected load: 7.34kW, turbine power: 5.5kW, impeller diameter: 334mm, throwing blades: 6, discharge speed: 30m/s-70m/s. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/3500mm, weight: approx. 2050kg, operating hours: 2559h. Documentation available. On-site inspection is possible.

Kabina śrutownicza

Auer ST 1600

Niemcy

1994

używany

na żądanie

INNO28254

An Auer blasting cabin is available. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/4500mm, operating hours: 16409h. Including all spare parts, protective screens and other accessories. Documentation available. On-site inspection is possible. Expected to be available from May 2025.

Zakład obróbki cieplnej

Paddeltherm

Niemcy

2003

używany

na żądanie

INNO28157

Length: 21,000mm, width: 5000mm. With 3 chest ovens and heatable water bath, with rail system above the ovens, with 2x 8 fans as air cooling unit, switch cabinets Schneider E-Technik Offenburg with S7 1500, was completely overhauled in 2019. On-site inspection is possible.

System czyszczący

Silberhorn Multijet S3

Niemcy

2018

używany

na żądanie

INNO28156

Wash basket dimensions: 2x 630x560x200mm, cleaning agent: aqueous cleaner, filling capacity: 3750l, max. back-up fuse: 250A, mains connection: 230/400VAC, connected load: 175kW, control panel: Janitza UMG 96 RM. On-site inspection is possible.

NC-pudrowa lakiernia

Wma Warsteiner Montage Und Anlagentechnik

Niemcy

2010

używany

na żądanie

INNO27980

Curing oven dimensions: 4000x21000mm. With residual moisture dryer, Gema powder device, Power & Free circulating material conveyor, Weishaupt WG 20-C (100kW) and WG 30-C (239kW) gas burner. On-site inspection is possible.

NC-pudrowa lakiernia

Wma Warsteiner Montage Und Anlagentechnik

Niemcy

2003

używany

na żądanie

INNO27978

Three-chamber pre-treatment dimensions: 3600x1200x1900mm, washing entrance dimensions: 700x1500mm, manual painting booth dimensions: 800x1700mm, cycle time: 6min. With residual moisture dryer, Gema Optiflex 2 powder device, Power & Free circulating material conveyor, Weishaupt WG 20-C (100kW) and WG 30-C (239kW) gas burner. On-site inspection is possible. Available in February 2025.

Lakiernia

Rippert/maxon/weishaupt

Niemcy

2011

używany

na żądanie

INNO27855

A complete painting system is available. Components: (1) overhead conveyor, (2) spraying area/brush wall, length: 4000mm, width: 1500mm, height: 4800mm, with Maxon burner, suction pipe, drawers for dry paint disposal, six filter mats, various filters, (3) evaporation area, (4) drying booth, length: 6500mm, width: 5200mm, height: 3150mm, with Weishaupt WG10N/1-D ZM-LN gas burner. Overall system dimensions: 24,000mm/10,000mm, max. output: 45kW. Documentation is available.

Piec na podczerwień

Schaetti/krelus G3-232-1Z

Niemcy

2001

używany

na żądanie

INNO27837

Output: 15kW, amperage: 37.5A, number of infrared radiators: 4, documentation available. On-site inspection is possible.

System czyszczenia ultradźwiękowego

Kln W1/90=40=45

Niemcy

2008

używany

na żądanie

INNO27554

Rated power: 2000W, frequency: 30kHz, heating power: 11.2kW, cleaning medium: aqueous, filling capacity: approx. 290l, transport mechanism: Lift, load capacity per lifting arm: 100kg. Machine dimensions X/Y/Z: approx. 2200mm/1400mm/2500mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

System wykończenia Drag

Rösler R 4/700 SF/Z1000 ASS-II-Turbo

Niemcy

2019

używany

na żądanie

INNO27443

A complete drag finishing machine consisting of 2 Rösler R 4/700 and a Z 1000 is available. 1/2) Rösler R4/700 SF, year of manufacture: 2019, spindle heads: 4, stations: 6, total output: 24 parts/pass, work bowl diameter: 700mm, connected load: 9kW, dimensions X/Y/Z: approx. 2100mm/1500mm/2600mm. 2) Centrifuge Rösler Z 1000 ASS-II-Turbo, year of construction: 2019, speed: 2650rpm, max. load: 65kg, max. throughput: 1000l/h, inner drum diameter: 500mm, max. product temperature: 50°C, weight: 1200kg, operating hours: 18202h. Including Rösler buffer tank PA 1000, documentation available. On-site inspection is possible. Available from September 2024.

System czyszczący

Noyen Smart 900 MPS

Niemcy

2018

używany

na żądanie

INNO27410

A chamber washing system is available. Cleaning chamber dimensions X/Y/Z: 700mm/800mm/800mm, washing medium: water, medium temperature: 55°C-65°C, max. payload: 200kg, wash tank: 900l, rinse tank: 900l, oil separator: approx. 200l, tank material: steel 1. 4301(304L), basket dimensions X/Y/Z: 1200mm/800mm/600mm, spray pressure: 3bar-5bar, dimensions X/Y/Z: approx. 5200mm/2400mm/3000mm, weight: approx. 2300kg, control: Siemens PLC, operating hours: 25342h. Documentation available.

Procesor plazmy atmosferycznej

Diener PlasmaBeam Standard

Niemcy

2020

używany

na żądanie

INNO27408

Treatment width: 8mm-12mm, max. plasma generator diameter: 32mm, plasma generator length: 210mm, cable length: 3m, inlet pressure: 5bar-8bar, gas consumption: approx. 2m³/h, generator power: 300W, frequency: approx. 40kHz, dimensions X/Y/Z: approx. 420mm/140mm/500mm, control: manual/semi-automatic, operating hours: 81h. Documentation available. On-site inspection is possible.

Oczyszczarka strumieniowa z taśmą ślimakową

Brück BR 60

Niemcy

1981

używany

na żądanie

INNO27373

Capacity per oven: 7000kg-8000kg/h, drum diameter: 1200mm, drum length: 1250mm, max. filling volume: 0.6m³, filling weight: 1500kg, max. piece weight: 200kg, air speed: 18m-20m/s, required extraction capacity: 6000m³/h, weight: approx. 15000kg. Including bucket elevator (1500kg), coater (3000kg), dedusting system, conveyor sieve FS 700/800x3200 and various spare parts as good as new. The unit was overhauled in 1998. Documentation available.