Used Metal processing machines from Germany

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Obróbka metali i obrabiarki [1 - 20 of 779]

Prasa hydrauliczna

Dunkes HZS 125

Niemcy

2000

używany

na żądanie

INNO26947

Pressing force: 1250kN, closing speed: 450mm/s, working speed: 21mm/s, stroke length: 590mm, dry weight: 15000kg. The hydraulic press has a defect in the tool holder, they must be fixated with clamping claws. Documentation available. On-site inspection is possible.

Frezarka CNC

Makino FNC-A20

Niemcy

1985

używany

na żądanie

INNO26937

Travels: 1200mm/700mm/650mm, table dimensions X/Y: 1550mm/650mm, torque: 410Nm, control: Heidenhain 426. On-site inspection is possible.

Precyzyjna Wiertarko-frezarka CNC

Fehlmann Picomax 54

Niemcy

2001

używany

na żądanie

INNO26941

Travel X/Y/Z: 500mm/260mm/480mm, speed: 9000rpm, quill stroke: 160mm, rapid traverse X/Y/Z: 2000mm/min, quill rapid traverse: 1200mm/min, feed forces X/Y/quill: 4000N. Table dimensions X/Y: 880mm/320mm, permissible table load: 300kg, table height from floor: 1042mm, min./max. table spindle nose distance: 110mm/610mm. T-slots: 12mm/H8. Control: Heidenhain TNC 310, dimensions X/Y/Z: 1800mm/2700mm/2500mm, weight: approx. 2400kg. Documentation available.

Frezarka CNC

Hurco VMX42t

Niemcy

2011

używany

na żądanie

INNO26940

Travel X/Y/Z: 1060mm/610mm/610mm, speed: 12000rpm, table dimensions X/Y: 1270mm/610mm, table load (uniform): 1350kg, feed: 15200mm/min, rapid traverse X/Y/Z: 35/35/30m/min, flutes/width: H8/18mm, flute spacing: 100mm. Control: Hurco WinMax, dimensions X/Y/Z: 2800mm/2200mm/2770mm, weight: 6800kg. In need of repair with new or overhauled spindle. Documentation available. On-site inspection is possible.

Frezarka uniwersalna

Shw UF 2

Niemcy

nieznany

używany

na żądanie

INNO26939

Travel X/Y/Z: 650mm/442mm/442mm, speed: 2170rpm, feed: 254mm/min, milling table clamping surface X/Y: 1080mm/400mm, number of clamping grooves: 5, quill stroke: 100mm, ram stroke: 100mm, swivel range in the milling table: +/-30°, swivel range milling ram device: +/-180°. Dimensions X/Y/Z: 1700mm/1800mm/1850mm, weight: approx. 3200kg. Documentation available.

Frezarka uniwersalna narzędziowa

Maho MH 800

Niemcy

1989

używany

na żądanie

INNO26938

Speed: 2000 rpm, headstock adjustment: 450mm, feed: 500mm/min, rapid traverse: 1400mm/min, table dimensions X/Y: 1050mm/627mm, number of slots: 8, swivel: +/-30°, tool holder: ISA40, quill stroke: 125mm, ram stroke: 125mm, ram swivel: 90°. Dimensions X/Y/Z: approx. 2600mm/1800mm/1800mm, weight: approx. 3000kg. Documentation available.

Centrum obróbcze CNC

Primacon PFM 4024-5D

Niemcy

2009

używany

na żądanie

INNO26945

A Primacon high-precision milling machine is available. Travel X/Y/Z: 400mm/240mm/350mm, A-axis: 360°, B-axis (swivel axis): -20°/+110°, speed: 42000rpm, spindle power: 16kW, tool change time: 6s, number of axes: 5, tool holder: HSK-E40. Rapid traverse X/Y/Z: 40000mm/min, B-axis (swivel axis): 12500°/min. Dimensions X/Y/Z: 2200mm/1900mm/2500mm, weight: 3100kg, control on: 78021h, machine on: 81455h, program run: 23069h, spindle run time: 5867h. Documentation available.

Odciąg oparów spawalniczych

Teka Filtercube 4H

Niemcy

2005

używany

na żądanie

INNO26944

Fan capacity: 7500m³/h, pressure: 3000Pa, filter area: approx. 80m², rated current: 15.5A, motor power: 7.5kW. Dimensions X/Y/Z: approx. 800mm/800mm/2900mm, weight: 380kg. Documentation available.

Nożyce do stali profilowanej

Mubea KLSH 550

Niemcy

nieznany

używany

na żądanie

INNO26943

Hole punch projection: 310mm, table dimensions X/Y: 700mm/600mm, pressing force: 550kN, flat steel shears: 320mm/13mm. Dimensions X/Y/Z: 1200mm/600mm/1900mm, weight: approx. 1200kg. Tools included.

Tokarka wielowrzecionowa

Mori-say 6/32M

Niemcy

1997

używany

na żądanie

INNO26918

A Mori-Say 6/32M multi-spindle curve lathe is available. Number of spindles: 6, max. spindle speed: 3750 rpm, max. bar diameter: 40mm. Dimensions X/Y/Z: approx. 6200mm/1600mm/2050mm, weight: approx. 9500kg.

Tokarka CNC

Takamaz X180

Niemcy

2010

używany

na żądanie

INNO26917

There are 4 identical Takamaz X180 CNC lathes available. Turning diameter: 210mm, turning length: 230mm, spindle bore: 51mm, speed: 3500rpm, number of axes: 3, tool positions: 12, chuck size: 8inch (Kitagawa B208, 200mm), control: Fanuc 0i-TC, weight: approx. 4000kg.

Tokarka CNC

Benzinger GOFuture-B1

Niemcy

2014

używany

na żądanie

INNO26916

A Benzinger high-precision CNC lathe is available. Travel X/Y: 370mm/250mm, feed force X/Y: 3500N, rapid traverse X/Y: 45m/min, speed: 6000rpm, spindle diameter: 26mm, tool positions: 8, control: Sinumerik 840DSL. Dimensions X/Y/Z: approx. 2000mm/1650mm/2050mm, weight: approx. 3500kg. Documentation available.

Centrum obróbcze profili CNC

Maka PA 37

Niemcy

2006

używany

na żądanie

INNO26915

Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available.

Centrum obróbcze do blach

Schlebach Quadro TP/EZT 12050 RS 10

Niemcy

nieznany

używany

na żądanie

INNO26912

Several Schlebach machines are available for complete thin sheet processing. 1) Profiling machine Quadro TP without cassettes, infeed width: 300mm-8000mm, control: Schneider Magelis. Including electronic length measurement, motor-driven roller knife for cross-cutting, documentation and spare parts list. 2) Infeed table EZT 12050 RS 10 with pivoting roller cutter (max. +10°). Length measurement min.: 1000mm, speed: 10m/min, infeed width: 1250mm, max. capacity non-ferrous metals/sheet steel/stainless steel sheet: 0.80mm/0.70mm/0.50mm. Documentation available. 3) Decoiler 2/600, max. coil width: 600mm, max. coil weight: 2000kg, max. coil inner diameter: approx. 510mm, max. coil outer diameter: approx. 1500mm. Documentation available. 4) Pair of exchangeable cassettes for Quadro, stations: 12, swivel capability: no, special profiling for non-ferrous metals with 0.5mm thickness. Documentation available for all machines.

Prasa do gięcia krawędzi CNC

Trumpf TrumaBend V170

Niemcy

1997

używany

na żądanie

INNO26911

Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available.

Tokarka wielowrzecionowa

Giledemeister GMC20 ONE

Niemcy

2010

używany

na żądanie

INNO26919

Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline.

Centrum obróbcze CNC

Brother TC-S2C-O

Niemcy

nieznany

używany

na żądanie

INNO26904

Control: Brother CNC B00, axes: 4, speed: 10000 rpm, Travel X/Y/Z: 700mm/400mm/300mm, table dimensions X/Y: 800mm/320mm, max. workpiece weight: 200kg, tool capacity: 21, tool holder: BT30. Dimensions X/Y/Z: approx. 2800mm/2200mm/2300mm, weight: approx. 2800kg.

Frezarka CNC

Union Bielefeld BF 650 U II-H

Niemcy

1987

używany

na żądanie

INNO26903

Travel X/Y/Z: 2000mm/1250mm/1000mm, table size X/Y: 2500mm/1000mm, max. table load: 6000kg, speed: 3000rpm, tool holder: ISO50, feed speed: 4000mm/min, rapid traverse: 8000mm/min. Gearbox/clutch not functional.

Prasa dziurkująca

Edel Stanzmaster 40

Niemcy

1985

używany

na żądanie

INNO26882

Pressing force: 400kN, throat depth: 520mm, dimensions X/Y/Z: 1800mm/1000mm/1900mm, weight: approx. 2600kg. Documentation available.

Odciąg trocin

Ringler RE 201

Niemcy

2007

używany

na żądanie

INNO26887

A Ringler suction system with 2 Ringler motors is available. On-site inspection is possible.