Narzędzia frezarskie

Leitz

Niemcy

nieznany

używany

na żądanie

INNO27643

Various wood milling tools are available for a Homag DEP. Spindle diameter: 35mm/50mm, tools: cutter set for longitudinal machining/replacement knives/milling tools. Documentation available. On-site inspection is possible.

więcej

Przenośnik ślimakowy

SEPF 600/SEPF 400

Niemcy

nieznany

używany

na żądanie

INNO27609

Two almost identical side screw conveyors are available for the timber industry. 1) Side screw conveyor SEPF 600, screw diameter: 580mm, screw length: 1800mm, machine dimensions X/Y/Z: approx. 3500mm/1200mm/1800mm, weight: approx. 7600kg. Including accessories. The machine is as good as new and is in its original packaging. 2) Side screw conveyor SEPF 400, weight: approx. 4200kg. The machine has been overhauled. Documentation available. On-site inspection is possible. The pictures only show the SEPF 400.

więcej

Zakład impregnacji

PIC1000

Niemcy

nieznany

używany

na żądanie

INNO27608

A pressurized impregnation screw conveyor for the timber industry is available. Length: 5500mm, diameter: 1000mm, operating pressure: 8bar, weight: approx. 12700kg. Documentation available. On-site inspection is possible. The machine is as good as new and is in its original packaging.

więcej

Prasa ślimakowa

MSD 400

Niemcy

nieznany

używany

na żądanie

INNO27607

An Impressafiner is available for dewatering in the timber industry. Operating pressure: 8bar, weight: approx. 15500kg. Documentation available. On-site inspection is possible. The machine is as good as new and is in its original packaging.

więcej

Prasa ślimakowa

Andritz HSP260-520/100

Niemcy

nieznany

używany

na żądanie

INNO27606

A fines press for dewatering for the wood industry is available. Screw diameter: 260mm, dewatering basket length: 520mm/100mm, speed: 29rpm, weight: approx. 830kg. Documentation available. On-site inspection is possible. The machine is as good as new and is in its original packaging.

więcej

Ślimak odwadniający

DS1x700x6000

Niemcy

nieznany

używany

na żądanie

INNO27599

A dewatering screw for wood chips (wood shavings) as good as new is available. Screw diameter: 700mm, screw length: 6000mm, machine dimensions X/Y/Z: approx. 6600mm/1400mm/5800mm, weight: approx. 5100kg. The machine consists of upper and lower part plus chute. Documentation available. On-site inspection is possible. The machine is in its original packaging.

więcej

Podłoga wibracyjna

Zeppelin VD 2400

Niemcy

nieznany

używany

na żądanie

INNO27598

A new vibrating discharge floor with compensator and accessories for wood chips is available. Diameter: 2400mm, material: steel, motors: 1-2, throughput: 5m³-320m³/h, weight: approx. 2950kg. Documentation available. On-site inspection is possible. The machine is in its original packaging.

więcej

Okleiniarka

Homag KAL 221 Edition 2264

Niemcy

2012

używany

na żądanie

INNO27582

Max. gluing thickness: 20mm, max. panel thickness: 40mm, max. roll material thickness: 3mm, feed rate: 25m/min, machine length: approx. 7800mm. Including a workpiece return system Homag TFU 140, year of construction: 2017, max. workpiece width: 1250mm, max. workpiece length: 2700mm, conveyor belt length: 10500mm, operating hours: approx. 26000h. Documentation available. On-site inspection is possible. Expected to be available from mid-October 2024.

więcej

Tabela produkcji

Weinmann

Niemcy

1999

używany

na żądanie

INNO27566

A production table for the wood industry is available. Table length: 11000mm, table width: 2500mm. On-site inspection is possible.

więcej

Centrum obróbki drewna

Weinmann

Niemcy

1999

używany

na żądanie

INNO27565

A production line for the wood industry is available. 1) Production table 1: Table length: 11900mm, production width: 2500mm-3200mm, working height: 750mm, work table covering: multi-layer board, drive type: chains/2 strands with rollers. Including longitudinal stop, transverse stop and longitudinal conveyor. 2) Production table 2: Table length: 11900mm, production width: 2500mm-3200mm, working height: 750mm, work table surface: multi-layer board, drive type: chains/2 strands with rollers. Including longitudinal stop, transverse stop and longitudinal conveyor. 3) Intermediate transport: length: 2770mm, width: 2000mm, height: 770mm, drive type: chains. Multifunction bridge: Aggregates: 6, clamps: 4, drilling/chipping: 2, suction: Longitudinal with one suction channel. Including manual film unwinder. Documentation available. An on-site inspection is possible. Expected to be available from January 2025.

więcej

Piła taśmowa

Centauro 750

Niemcy

nieznany

używany

na żądanie

INNO27353

Saw blade length: 4330mm-4450mm, dimensions X/Y/Z: approx. 850mm/520mm/1800mm. An on-site inspection is possible.

więcej

Kanał suszący UV

Cefla Ecolight

Niemcy

1994

używany

na żądanie

INNO27306

There are 2 Cefla UV continuous dryers available. 1) Length: 3020mm, working width: 1400mm, number of lamps: 2. 2) Length: 3530mm, working width: 1400mm, number of lamps: 4. On-site inspection is possible. Available from January 2025.

więcej

Maszyna do powlekania rolkowego

Bürkle Kombimaschine

Niemcy

nieznany

używany

na żądanie

INNO27303

A Bürkle combination roller applicator with distributor brush is available. The machine is without brushes and with application roller.

więcej

Szlifierka stołowa

Heesemann LSM8-U

Niemcy

2004

używany

na żądanie

INNO27292

An LSM8-U under-table sanding machine is available. Sanding belt dimensions: 2620x1350mm, sanding width: 1300mm, working height: 1000mm, drum diameter: 150mm, belt speed: 24m/s, suction volume: 89.5m³/min, suction nozzle diameter: 250mm + 180mm, air speed: 20m/s. Dimensions X/Y/Z: approx. 2400mm/2100mm/2500mm. Documentation available. On-site inspection is possible.

więcej

Szlifierka taśmowa

Heesemann LSM8-S

Niemcy

2004

używany

na żądanie

INNO27291

A 5-roller Heesemann wood sanding machine is available. Sanding belt dimensions: 2620 x 1350mm, sanding width: 1300mm, working height: 1000mm, roller diameter: 250mm, belt speed: 24m/s, suction volume: 89.5m³/min, suction nozzle diameter: 250mm + 180mm, air speed: 20m/s. Dimensions X/Y/Z: approx. 5200mm/2300mm/2300mm, weight: approx. 13000kg. Documentation available. On-site inspection is possible.

więcej

Pilarka tarczowa z wieloma ostrzami

Paul Machinenfabrik K34G 0/1200

Niemcy

2006

używany

na żądanie

INNO27290

Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible.

więcej

Maszyna do powlekania rolkowego

Bürkle SAL 1300

Niemcy

1997

używany

na żądanie

INNO27289

Working width: 1300mm, workpiece length: 250mm, workpiece height min./max.: 3mm-80mm, working height: 870mm, speed: 6m-30m/min, chrome-plated/rubber-coated roller diameter: 174mm/238mm, working pressure: 6bar. On-site inspection is possible.

więcej

Maszyna do powlekania rolkowego

Bürkle SAL 1300/DAL 1300

Niemcy

1997

używany

na żądanie

INNO27288

Three Bürkle roller coating machines are available. Working width: 1300mm, workpiece length: 250mm, workpiece height min./max.: 3mm/80mm, working height: 870mm, speed: 6m-30m/min, chrome-coated/rubber-coated roller diameter: 174mm/238mm, working pressure: 6bar. Machines without application roller. On-site inspection is possible.

więcej

Maszyna do powlekania rolkowego

Bürkle CASC 1300

Niemcy

2005

używany

na żądanie

INNO27287

Working width: 1300mm, material thickness: 0.1-80mm, working speed: 6m-30m/min, dimensions X/Y/Z: approx. 2500mm/1500mm/1600mm, weight: approx. 2000kg. Machine without cabinet. On-site inspection is possible.

więcej

Nakładarka kleju

Barberan LP 1400

Niemcy

2007

używany

na żądanie

INNO27286

Working width: 1400mm, max. speed: 20m/min, power: 15kW, dimensions X/Y/Z: approx. 2000mm/750mm/1500mm, weight: approx. 1000kg. On-site inspection is possible.

więcej

Wszystkie oferty / Maszyny do obróbki drewna