▷ Używane inne maszyny z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Inne maszyny

Ceramika, kamienie i ziemia 8 Maszyny specjalne 9 Maszyny szklane 31 Technologia próżniowa 3 Zarządzanie odpadami, recykling 24

Innovac maszyny-uzywane

Inne maszyny [21 - 40 of 75]

Szklana ramka

Hegla MWGL

Niemcy

1990

używany

na żądanie

INNO27343

There are 30x glass racks PEL for inline transporters available. Load capacity: 6000kg, max. loading height: 2700mm, max. glass dimensions X/Y: 3210mm/2550mm, dimensions X/Y/Z: approx. 3340mm/750mm/3000mm, weight: approx. 350kg, years of construction: from 1990. On-site inspection is possible. Available from February 2025.

Maszyna do cięcia szkła

Bystronic

Niemcy

1990

używany

na żądanie

INNO27342

Glass panel dimensions X/Y: 3210mm/2550mm, max. glass thickness: 19mm, capacity: 20 panels/h, dimensions X/Y/Z: approx. 18500mm/8000mm/2900mm, weight: approx. 6500kg. Including safety fence. Documentation available. On-site inspection is possible. Available from February 2025.

Podnośnik próżniowy

Schmalz SCH500/EVE-TR 4

Niemcy

2012

używany

na żądanie

INNO27311

A crane with a vacuum lifter Schmalz is available. Vacuum pump: Speed: 3300 rpm, power requirement: 0.21 kW, pumping speed: 4.7 m³/h, suction pressure: 850 mbar. Crane: Load capacity: 200kg.

Rozdrabniacz

Mecatex MR1000

Niemcy

2012

używany

na żądanie

INNO27268

A Mecatex shredder for wool is available. Number of rotor knives: 45, number of fixed knives: 6, number of knife holders: 2, working length: 1000mm, motor power: 37kW, max. production capacity: 1000m²/h. Control cabinet dimensions X/Y/Z: approx. 600mm/420mm/2000mm, control cabinet weight: approx. 80kg. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/2600mm, machine weight: approx. 2500kg, operating hours: approx. 900h. The hydraulics for tilting the hopper are defective. Documentation available. On-site inspection is possible.

Maszyna do sitodruku

Europa-siebdruck-centrum AT-PA45

Niemcy

2008

używany

na żądanie

INNO27199

Max. print format X/Y: 300mm/450mm, print table dimensions X/Y: 400mm/600mm, vacuum area X/Y: 345mm/465mm, max. screen frame format: 500mm/750mm, screen frame profile: 20mm-30mm. Max. print material thickness: 260mm, print table height: 945mm + 30mm, screen frame lift: 300mm. Print head speed: 100mm-500mm /s, max. cycle output: 800p/h. Dimensions X/Y/Z: approx. 900mm/750mm/1700mm, weight: approx. 300kg. Documentation available. On-site inspection is possible.

Ściana obrotowa

Hegla Drehwand

Niemcy

2017

używany

na żądanie

INNO27125

A rotating wall for the glass industry is available. Weight: approx. 1300kg.

Maszyna do transportu szkła

Hegla SF 2518

Niemcy

2017

używany

na żądanie

INNO27124

A Hegla SF 2518 vertical conveyor for the glass industry is available, weight: approx. 2700 kg.

Szklany stół przenośnikowy

Lisec BTA

Niemcy

2016

używany

na żądanie

INNO27123

A Lisec horizontal conveyor field is available. Pressure: 6bar, max. conveyor weight distribution: 50kg/m², weight: approx. 1450kg.

Prasa do belowania

Big Komet 12

Niemcy

1995

używany

na żądanie

INNO27105

A Big Komet 12 press is available. Pressing force: 120kN, dimensions X/Y/Z: approx. 4000mm/1100mm/1100mm, weight: approx. 5000kg.

Prasa do belowania

Big HK 25

Niemcy

1998

używany

na żądanie

INNO27104

A Big HK 25 press is available. Pressing force: 250kN, dimensions X/Y/Z: approx. 5600mm/1100mm/3900mm, weight: approx. 5000kg.

Młyn tnący

Exact Cyclop 20

Niemcy

2015

używany

na żądanie

INNO27037

Working speed: 200-250m/min, max. working capacity: 300kg/h, cutting wheel diameter: 200mm, pressure cylinder diameter: 102mm, control: Omtron.

Oczyszczalnia ścieków

Agw Chargenbehandlung

Niemcy

2004

używany

na żądanie

INNO26974

A wastewater treatment plant based on batch treatment from Antech Gütling (AGW), which was used in the printed circuit board industry (electronics), is available. It consists of a waste water collection station, a batch treatment, a chemical dosing station, a sludge treatment, a post-filtration/pH final control and an exhaust air scrubber. The system treats rinsing water, acidic and alkaline concentrates as well as waste water from the resist developer, resist stripper and solder resist developer areas. The system does not treat solvents, paints, hydraulic oils, used etchings (ammoniacal/acidic), waste water containing chlorite or EDTA-based chemical copper. Capacity: approx. 3m³/h. Documentation is available.

Napinacz termiczny

Erdmann Vitromod 160/280

Niemcy

2008

używany

na żądanie

INNO26884

Glass thickness range (ESG): 4mm-12mm, glass thickness range (TVG): 3mm-12mm, max. working width: 1600mm, max. batch length: 2800mm, min. sheet length: 300mm, min. sheet width: 100mm, max. glass size X/Y with 4mm glass thickness: 1600mm/2800mm. Dimensions X/Y/Z: 16000mm/8000mm/5000mm. Fans included. Documentation available. Available from mid-June, 2024.

Rozdrabniacz

Zeno ZTLL 1600x2300

Niemcy

2010

używany

na żądanie

INNO26874

Working width: 1600mm, infeed cross-section X/Y: 1600mm/2300mm, main drive: 75kW, 1500rpm, rotor flight circle: 600mm, rotor speed: approx. 85rpm, number of cutting tools: 42, screen design: perforation 40mm. Dimensions X/Y/Z: 5015mm/2650mm/2935mm, weight: approx. 14000kg. Documentation available.

Rozdrabniacz

Zeno ZTLL 1400x1600

Niemcy

2010

używany

na żądanie

INNO26873

Working width: 1400mm, infeed cross-section X/Y: 1400mm/1600mm, drive: 45kW, 1500rpm, rotor flight circle: 380mm, rotor speed: approx. 105rpm, number of cutting tools: 52, screen design: 12mm perforation, screen diameter: 30mm, hydraulic unit: 2.2kW, 1420rpm. Dimensions X/Y/Z: 2740mm/2270mm/2390mm, weight: approx. 5400kg. Documentation available.

Prasa papierowa

Allweiler SFDR10

Niemcy

1978

używany

na żądanie

INNO26786

Qn: 47l/min, Qv: 2750l/min, Hn: 75mm²/s, Δp: 5bar, P: 1.5kW.

Poziomy piekarnik z przenośnikiem elektrycznym

Kera Glass 1250

Niemcy

2004

używany

na żądanie

INNO26762

A horizontal, continuous, electric tempering furnace complete with pre-stressing cooler and post-cooling section is available. Total oven length: 19.44m, useful load width: 1250mm, length of tempering station: 15.12m, length of post-cooling station: 4m. Length of loading table: 4m, length of unloading table: 4m, total length of tempering system: 47.19m, including robot: 52m, total width without sound insulation: approx. 6.00m. Glass thickness range: 2.8mm to 10mm, max. glass size: 1250mm/2200mm, min. glass size: 100mm/250mm. Documentation available.

Dudniąca maszyna

Penta

Niemcy

2002

używany

na żądanie

INNO26484

Max. load capacity: 1t, with documentation, on-site inspection is possible.

Maszyna do cięcia dźwięku

C. Keller U. Co.

Niemcy

nieznany

używany

na żądanie

INNO26405

Accessories/documentation are partially available, has been regularly serviced, on-site inspection is possible.

Schody ewakuacyjne

Niemcy

nieznany

używany

na żądanie

INNO26284

Storey height: 3130mm, usable runner width: 1000mm, step width: 270mm, rise height: 185mm, runner plate thickness: 40mm, runner length: 2430mm, length: 5050mm, width: 2830mm, height: 11,000mm.