▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Tokarki [81 - 100 of 109]

Automatyczna tokarka wielowrzecionowa CNC

Index-werke MS 52G

Niemcy

2004

używany

na żądanie

INNO26005

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190kW, controls: C200-4D Siemens 840D, operating/spindle hours: 134,454/ 71,998h, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible.

Automatyczna tokarka wielowrzecionowa CNC

Index-werke MS 52G

Niemcy

2004

używany

na żądanie

INNO26004

The system is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load 190 kW, control: C200-4D Siemens 840D, operational/ spindle hours counter: 152.203/ 77.546h, with 12 clamping devices, 5 rigid tool holders single, three rigid tool holders multiple, 4 driven tool holders, extraction Büchel, coolant device, belt filter system, fire extinguishing system Kraft & Bauer FT704, handling Festo, operator panel Siemens Simatic OP 7, removal device, positioning gripper, set-down device and other accessories, was maintained regularly, an inspection is possible.

Tokarka CNC

Padovani Labor E255x1500

Niemcy

1996

używany

na żądanie

INNO25990

Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible.

Tokarka

Schaublin 180-CCN

Niemcy

1998

używany

na żądanie

INNO25621

Connected load: 24kW.

Pionowa tokarka wielowrzecionowa

Emag VSC 200

Niemcy

1999

używany

na żądanie

INNO25553

There are two identical Emag VSC 200 available, x-travel: 685mm, z-travel: 160mm, chuck diameter: 200mm, circumferential diameter: 290mm, connected load: 29kW, controls: SIEMENS SINUMERIK, length: 2700mm, width: 1150mm, height: 2800mm, weight: 6.5t, with documentation.

Tokarka karuzelowa

Dörries Scharmann CONTUMAT VC 5000/450 MC

Niemcy

2009

używany

na żądanie

INNO25496

X-travel: +/-2750mm, z-travel: 2000mm, B-travel: +/-90°, C-travel: 360°, table diameter: 4500mm, turning and circumferential diameter: 5000mm, max. turning height: 2645mm, rotational speed: 8-3000/min, controls: Siemens SINUMERIK 840D, with documentation, base, stand, crossbar, support and chisel pusher.

Centrum tokarskie CNC wielosuwakowe

Ergomat TBC-42

Niemcy

2007

używany

na żądanie

INNO25442

Bar capacity round/hexagonal/square: 42/36/29mm, connected load: 22.5kW, controls: GE Fanuc Series 18i-TB, length: 2200mm, width: 1270mm, height: 1580mm, weight: 2.7t, operating hours control: 28,829h.

Tokarka pionowa

Schuster Futureline VTM 350

Niemcy

2005

używany

na żądanie

INNO25051

X-travel: 200mm, z-travel: 400mm, W-travel: 670mm, swing diameter over slide: 300mm, center distance: 600mm, max. turning length: 350mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 6t, with documentation.

Tokarka pionowa

Schuster Futureline VTM 650

Niemcy

2004

używany

na żądanie

INNO25049

X-travel: 200mm, z-travel: 650mm, W-travel: 750mm, swing diameter over slide: 265mm, center distance: 650mm, max. turning length: 650mm, length: 2500mm, width: 2000mm, height: 3350mm, weight: 7.2t, with documentation.

Tokarka automatyczna

Schütte SE 25

Niemcy

nieznany

używany

na żądanie

INNO24524

The machine is fully functional.

Tokarka cykliczna CNC

Jupiter CCR 400

Niemcy

2006

używany

na żądanie

INNO24500

Turning length: 3000mm, center height: 392mm, swing over bed/ slide: 800/ 490mm, rotational speed: 1500-6000/min, tailstock diameter: 100mm, controls: FAGOR 800 T, with documentation, three-jaw chuck 400mm, with change jaws, four-jaw plate face 500mm, Multifix change holder, fixed bezel.

Tokarka centralna

Heidenreich & Harbeck 21 RO

Niemcy

nieznany

używany

na żądanie

INNO24377

Voltage: 380V, connected load: 5.5kW.

Tokarka uniwersalna CNC

Monforts KNC 5 1500

Niemcy

1996

używany

na żądanie

INNO24272

Center distance: 1500mm, rotational speed: 3-2800/min, max. swing over bed/ slide: 500/ 290mm, controls: Monforts Control-System K, weight: 3.3t, with accessories, without tools.

Tokarka CNC

Gildemeister CTX-400 E V5

Niemcy

1996

używany

na żądanie

INNO24068

Software: Eltro Pilot, controls: Heidenhain Turn Plus (EP90) 1190 V4.6, spindle hours counter: 45,288h, including accessories. Pictures upon request.

Tokarka centralna

Weiler Condor VS

Niemcy

nieznany

używany

na żądanie

INNO24005

Length: 1800mm, width: 1000mm, height: 1800mm, weight: 800kg, the top slide of the machine is defective.

Tokarka automatyczna

Index ER 25

Niemcy

nieznany

używany

na żądanie

INNO23789

There are three identical machines available, two machine have a Bar Loader SAMECA MONOSAM 65 each, including documentation, various accessories and spare parts, were maintained regularly.

Krótka tokarka CNC

Kummer K90D

Niemcy

1994

używany

na żądanie

INNO23732

X-travel: 210mm, z-travel: 100mm, operational hours counter: 19,741h, with handling.

Tokarka

Friedrich Jäger UMA 17 SEK

Niemcy

nieznany

używany

na żądanie

INNO22506

Including hydraulic aggregate, an inspection is possible.

Tokarka

Weiler MDU 260

Niemcy

nieznany

używany

na żądanie

INNO21863

Swing over bed/ slide: 260/ 140mm, length: 1250mm, width: 550mm, height: 1200mm, weight: 370kg.

Tokarka uniwersalna

Boehringer DM 550

Niemcy

1976

używany

na żądanie

INNO21745

Center height: 265mm, center distance: 1500mm, rotational speed: 9-1800/min, swing over bed/ crank: 550/ 750mm, connected load: 18.5kW, length: 4100mm, width: 1900mm, height: 1900mm, weight: 3.9t.