Tokarka uniwersalna

Monforts KNC 1500

Niemcy

1996

używany

na żądanie

INNO26799

Center width: 1500mm, max. turning diameter: over bed: 500mm, over cross slide: 290mm, max. spindle speed: 2800rpm, control: Monforts Control-System K, weight: 3300kg. Including Coromant Capto with inserts, workbench without tools, grating.

więcej

Tokarka CNC

Index G200 Compact

Niemcy

2003

używany

na żądanie

INNO26765

Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg.

więcej

Tokarka CNC

Index G200 YB Ratioline

Niemcy

1995

używany

na żądanie

INNO26764

Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016.

więcej

Tokarka

Meuser & Co M IV S

Niemcy

nieznany

używany

na żądanie

INNO26740

Center width: approx. 1400mm, center height: approx. 550mm, spindle diameter: approx. 100mm, faceplate: 1000mm/820mm. Speed: 560rpm, lathe chuck: 400mm/320mm.

więcej

Tokarka

Boehringer DUE 560x2000

Niemcy

2007

używany

na żądanie

INNO26737

Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available.

więcej

Tokarka rolkowa

Herkules WD 450s x 4000

Niemcy

1965

używany

na żądanie

INNO26665

Center height: 450mm, maximum turning diameter: 700mm, maximum turning length: 4000mm, chuck range for the four-jaw chuck: 100 - 700mm, additional clamping cartridge span range: 500mm, spindle speed ranges: 8, adjustable from 1 to 75 rpm, feed rates: continuously adjustable from 1 to 200mm per minute. The feed drives were upgraded in 2009 to Siemens 1FK7, including all necessary electrical work, which allowed for the elimination of the PIV feed gearbox. An on-site inspection is possible.

więcej

Tokarka pionowa CNC

Index V200-R

Niemcy

1996

używany

na żądanie

INNO26466

X-travel: 520mm, z-travel: 200mm, circumferential diameter: 325mm, spindle bore: 60mm, rapid traverse: 30m/min, number of tool positions: 25, control: Index C200-4, including three-jaw chuck, pallet circulation system, coolant tank, scraper belt conveyor, tool holder and documentation, on-site inspection is possible.

więcej

Tokarka pionowa

Famar S.r.l. ERGO 260

Niemcy

2007

używany

na żądanie

INNO26384

A single-spindle pick-up lathe is available, max. swivel diameter: 250mm, working spindle nose: ASA 6 inch, spindle in front bearing: 110mm, max. chuck diameter: 250mm, weight: 13t, operating hours: approx. 82,400h, with documentation, an on-site inspection is possible.

więcej

Tokarka pionowa

Famar S.r.l. ERGO 200

Niemcy

2006

używany

na żądanie

INNO26383

A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible.

więcej

Tokarka

Wagner DCS 160x900

Niemcy

nieznany

używany

na żądanie

INNO26323

Center height: 160mm, center distance: 900mm, with various accessories, an inspection is possible.

więcej

Tokarka

Ursus Tortana 225

Niemcy

1985

używany

na żądanie

INNO26250

Weight: 1.5t, connected load: approx. 1.5t, on-site inspection is possible.

więcej

Tokarka CNC

Haas SL-20THE

Niemcy

2007

używany

na żądanie

INNO26249

Length: 2600mm, width: 1700mm, height: 1800mm, connected load: approx. 12.5kW, on-site inspection is possible.

więcej

Tokarka

Famot Europa

Niemcy

1995

używany

na żądanie

INNO26248

Length: 2300mm, width: 800mm, height: 1500mm, weight: 1.5t, supply voltage: 400V, on-site inspection is possible.

więcej

Tokarka CNC

Traub TND 300

Niemcy

1994

używany

na żądanie

INNO26200

Spindle clearance: 42mm, turning diameter over face slide/bed: 170/400mm, speed: 56-5600rpm, control: TX 8F. With four driven tools, various tool holders VDI30, high-pressure pump 15bar, measuring arm for tool measurement. Operating hours: 38,274h, Baumüller drive BUH-4-55-6-002 produces an error message and must be overhauled. On-site inspection is possible.

więcej

Tokarka CNC

Index V200

Niemcy

1996

używany

na żądanie

INNO26198

Spindle diameter: 30mm, rotationalspeed: 7500rpm, with chip conveyor and base holder. Control: Siemens Sinumerik 840 C, length: 3210mm, width: 2084mm, height: 2214mm, weight: 3.2t. Line pressure: 210bar, injection force: 182kN, clamping force: 1000kN, opening stroke: 0-400mm, mold installation height: 450-750mm. An on-site inspection is possible.

więcej

Tokarka cykliczna

Wemas HT 500/1500

Niemcy

2000

używany

na żądanie

INNO26127

X-travel: 250mm, z-travel: 1450mm, center distance: 1500mm, max. workpiece weight: 350kg, turning diameter over bed/support: 500/350mm, quill diameter: 80mm, quill stroke: 180mm, connected load: 30kVA, length: 3130mm, width: 1560mm, height: 1845mm, weight: 2.6t, with documentation, an on-site inspection is possible.

więcej

Tokarka

Weisser Heilbronn JUNIOR

Niemcy

1972

używany

na żądanie

INNO26119

An inspection is possible.

więcej

Tokarka pionowa

Hessapp DVH 450 e

Niemcy

2005

używany

na żądanie

INNO26033

Rotation diameter: 450mm, control: GE Fanuc Series 21i-TB, weight: 13.5t, operating hours: 80,305h, available from 1st quarter 2024.

więcej

Automatyczna tokarka wielowrzecionowa CNC

Index-werke MS 52C

Niemcy

2004

używany

na żądanie

INNO26008

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 100mm, y-travel: 56mm, z-travel: 180mm, max. bar capacity: 52mm, connected load: 124kW, control: C200-4D Siemens 840D, operating/spindle hours: 148,849/ 75,709h, with 12 tool carriers, coolant device, Knoll 450K chip conveyor, Knoll AE 1100 belt filter system, industrial robot Stäubli, programming panel, removal device, depositing device and other accessories, has been regularly serviced, on-site inspection is possible.

więcej

Automatyczna tokarka wielowrzecionowa CNC

Index-werke MS 52G

Niemcy

2004

używany

na żądanie

INNO26007

The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.

więcej

Wszystkie oferty / Obróbka metali i obrabiarki / Tokarki