▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Tokarki [21 - 40 of 129]

Tokarka CNC

Spinner TC67L

Niemcy

1995

używany

na żądanie

INNO28638

Turning diameter: 298mm, orbital diameter: 450mm, travel X/Z: 221mm/590mm, center distance: 580mm, spindle speed: 4500rpm, spindle power: 11kW. Tool holder: VDI 30, tool positions: 12, machine dimensions X/Y/Z: approx. 2700mm/1500mm/1800mm, weight: approx. 4000kg, control: Siemens Sinumerik 840D. The machine cannot be started up. After an internal analysis, a file within the DOS is probably no longer executable. Documentation available. On-site inspection is possible.

Tokarka CNC

Wmz H200-O

Niemcy

2018

używany

na żądanie

INNO28633

A high-precision WMZ H200-O CNC combination machine in need of overhaul is available. Processes: Drilling, turning, milling, tool holder: VDI40, tool positions: 12, control: Siemens 840D SL, operating hours: 14748h. Including cooling lubricant system, Knoll chip conveyor, Mahle air cleaner and Hydac hydraulic unit. The machine requires a complete overhaul. The machine components have been dismantled but are still present. Documentation available. On-site inspection is possible.

Tokarka CNC

Wmz H200-O

Niemcy

2018

używany

na żądanie

INNO28632

A high-precision horizontal lathe WMZ in need of overhaul is available. Processes: Drilling, turning, milling, skiving, tool holder: VDI40, tool positions: 12, workpiece length range: 180mm-600mm, workpiece diameter range: 50mm-95mm, max. workpiece weight: 5kg, cycle time: 48min, control: Siemens 840D SL, operating hours: 15726h. Including cooling lubricant system Knoll KF 150-75, chip conveyor Knoll, air cleaner Mahle and hydraulic unit Hydac. The machine requires a complete overhaul. The machine components have been dismantled but are still present. Documentation available. On-site inspection is possible.

Tokarka centralna

Wmw DLZ 450x1600

Niemcy

1965

używany

na żądanie

INNO28608

A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.

Tokarka uniwersalna CNC

Mag Ias DUS 800 ti/6000

Niemcy

2013

używany

na żądanie

INNO28531

Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible.

Tokarka wysokoobrotowa

Okuma LS 450

Niemcy

nieznany

używany

na żądanie

INNO28526

Center height above bed/slide: 450mm/250mm, center distance: 850mm, spindle bore: 52mm, travel X/Z: 270mm/140mm, quill stroke: 150mm, quill diameter: 80mm. Machine dimensions X/Y: approx. 2400mm/1200mm, weight: approx. 2500kg. Some of the gears are defective, which means that the speeds cannot be operated. Documentation available. On-site inspection is possible.

Tokarka pionowa CNC

Emag VL 5 m LT

Niemcy

2003

używany

na żądanie

INNO28520

An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible.

Tokarka CNC

Hyundai HD2200

Niemcy

nieznany

używany

na żądanie

INNO28510

A CNC double-spindle lathe Hyundai with a new bar loader Iemca (Bucci) is available. 1) CNC lathe Hyundai HD2200 SY, turning diameter: 300mm, turning length: 610mm, spindle passage: 65mm, speed: 4000rpm, power: 18.5kW, chuck size: 8 inch, counter spindle passage: 52mm, speed: 6000rpm, chuck size: 5 inch, Y-axis: +/-55mm, tool positions: 24, rapid traverse X/Y/Z: 24m/10m/30m/min, operating hours: 3330h, manufactured parts: 44478. 2) Bar loader Iemca (Bucci) Master 865/33/Mp, year of manufacture: 2023, round bar diameter range: 8mm-65mm, hexagonal bars: 7mm-55mm, square bars: 10mm-45mm, bar length range: 800mm-4300mm, remaining piece length with diameter below 65mm min./max.: 110mm/400mm. Documentation available. On-site inspection is possible.

Tokarka pionowa CNC

Gildemeister CTV 160

Niemcy

2013

używany

na żądanie

INNO28487

Workpiece diameter: 220mm, max. workpiece height: 160mm, max. orbital diameter: 220mm, max. chuck diameter: 220mm, travel X/Y/Z: 620mm/+-90mm/300mm, tool positions: 12, tool holder: VDI 30, machine weight: approx. 5500kg, operating hours: 58082h, spindle hours: 38539h. Turret defective. Documentation available. On-site inspection is possible.

Tokarka dwuwrzecionowa CNC

Doosan QL300H

Niemcy

2005

używany

na żądanie

INNO28472

Spindle distance: 500mm, turning diameter: 2200mm/50mm, turning length: 100mm/140mm, bar capacity: 64mm, spindle bore: 77mm, speed: 3500rpm, torque: 395Nm, bearing diameter: 120mm. Travel X/Z: 210mm/230mm, rapid traverse X/Z: 24m/min. Turret: 2, turret type: V10, tool positions: 2x10, boring bar diameter: 50mm, tool dimensions: 25x25mm/40mm. Machine dimensions X/Y/Z: approx. 5400mm/2600mm/3900mm, weight: approx. 9000kg, control: Fanuc F18iTB. Including 3-axis gantry loader and loading magazine. One circuit board of the machine must be replaced. Documentation available. On-site inspection is possible.

Tokarka dwuwrzecionowa CNC

Muratec MW 200

Niemcy

2011

używany

na żądanie

INNO28471

Turning diameter: 350mm, turning length: 170mm, spindle center distance: 440mm, travel X/Z: 190mm/170mm, rapid traverse X/Z: 24m/min. Spindle: 2, spindle power: 22kW, max. chuck protection: 10 inch, spindle bore: 63mm, speed: 3500rpm, front bearing inner diameter: 110mm, spindle mount: JIS A2-7. Tool turret: 2, tool positions: 2x10, shank height: 25mm, shank diameter: 40mm. Machine dimensions X/Y/Z: approx. 2400mm/2200mm/3100mm, weight: approx. 7200kg, control: Fanuc 32i-A. Including 3-axis gantry loader, transformer and workpiece magazine WF14L-280II. Documentation available. On-site inspection is possible.

Tokarka karuzelowa CNC

Rem SC50-70

Niemcy

nieznany

używany

na żądanie

INNO28446

A CNC-controlled REM vertical lathe is available. Working diameter: 2500mm-7000mm, working height: 1000mm, control: Siemens 840D. Including driven tools. On-site inspection is possible.

Tokarka dwuwrzecionowa CNC

Mazak MP-6200 Y

Niemcy

2001

używany

na żądanie

INNO28443

A Mazak CNC double-spindle lathe is available. Chuck diameter: 8 inch, max. swing diameter: 320mm, max. machining length chuck workpiece/shaft workpiece: 180mm/530mm, max. bar diameter: 51mm, speed: 5000rpm, rated power: 22kW. Traverse path X: 240mm, traverse path Y: +/-50mm, traverse path Z left/right: 440mm/495mm, rapid traverse X1/X2: 30.5m/min, rapid traverse Z1/Z2: 33m/min. Tool positions: 12, speed of driven tools: 4500 rpm. Machine dimensions X/Y/Z: approx. 3600mm/2000mm/2100mm, weight: approx. 8000kg, control: Mazatrol 640T. Including Cut-Feeder 80, Knoll high-pressure system and some tool holders. Documentation available. On-site inspection is possible.

Tokarka cykliczna CNC

Romi M420

Niemcy

2007

używany

na żądanie

INNO28429

Center height: 215mm, center width: 1000mm, turning diameter over bed/cross slide/slide wing: 430mm/204mm/400mm, spindle bore: 53mm, speed: 3000rpm, power: 7.5kW. Rapid traverse X/Z: 7500mm/1000mm/min, traverse path X/Z: 220mm/1000mm, tool positions: 8, machine dimensions X/Y/Z: approx. 2800mm/1300mm/2000mm, weight: approx. 2850kg, control: GE Fanuc Series 21i-TB. On-site inspection is possible.

Tokarka pionowa CNC

Index V200

Niemcy

1997

używany

na żądanie

INNO28413

Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. The X-axis of the machine makes running noises. Documentation available. On-site inspection is possible.

Tokarka cykliczna CNC

Gildemeister NEF 720/2000

Niemcy

nieznany

używany

na żądanie

INNO28388

Rotation diameter over bed/face slide: 710mm/410mm, turning length: 2000mm, center height: 350mm, spindle bore: 92mm, speed: 1800rpm, quill diameter: 210mm, rapid traverse X/Z: 8m/min/10m/min, feed: 5m/min, feed force: 2000daN. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5600kg. Documentation available. On-site inspection is possible.

Tokarka cykliczna CNC

Gildemeister NEF 520/1500

Niemcy

2006

używany

na żądanie

INNO28387

Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, speed: 3050rpm, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible.

Tokarka cykliczna CNC

Gildemeister NEF 520/1000

Niemcy

nieznany

używany

na żądanie

INNO28386

Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, spindle diameter: 120mm, speed: 3050rpm, drive power: 12kW, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible.

Tokarka cykliczna CNC

Microcut Challenger BNC 1860

Niemcy

2006

używany

na żądanie

INNO28383

Travel X/Z: 500mm/1600mm, speed: 4500rpm, spindle bore: 65mm, spindle power: 11kW, tool positions: 8, rapid traverse X/Z: 15m/min, weight: approx. 3450kg. Documentation available. On-site inspection is possible.

Tokarka pionowa CNC

Danobat Danumeric TV-200/CSM

Niemcy

2002

używany

na żądanie

INNO28299

A Danobat CNC vertical lathe including accessories is available. Workpiece diameter: 200mm, workpiece turning diameter: 300mm, roller bearing inner diameter: 140mm, spindle inner diameter: 50mm, chuck diameter: 210mm, speed: 4700rpm. Tool positions: 8, feed X/Z: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2000mm/3000mm, control: Siemens Sinumerik 810D. Including pick-up function and pallet magazine EWAB. Documentation available. On-site inspection is possible.