▷ Używane maszyny do obróbki metalu z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Maszyny do obróbki drutu [1 - 20 of 23]

Maszyna do zwijania sprężyn

Wafios FTU 3.3

Niemcy

1996

używany

na żądanie

INNO29037

A Wafios CNC spring coiling machine is available. Wire diameter range: 1.5mm-6mm, max. spring diameter: 20mm, feed rate: 40m/min, production output: 80 pieces/min, axis resolution X/Y/Z/C/A/O: 0.1°/0.36°/0.001mm/0.001mm/0.1°/0.1°, working height: 1200mm, machine dimensions X/Y/Z: approx. 2300mm/2500mm/2400mm, control: Schleicher. On-site inspection is possible.

Maszyna do zwijania sprężyn

Schenker 15E

Niemcy

1995

używany

na żądanie

INNO28783

A Schenker spring coiling machine including a 2-finger coiling system (left and right), a multiple lifting device and a Böhm MRS-1 length measuring device is available. Wire diameter range: 0.4mm-1.8mm, outer spring diameter: 2mm-30mm, connected load: 3.1kW, production output: 400 springs/min, machine dimensions X/Y/Z: approx. 1150mm/900mm/1450mm. In 2008, the drive motor was replaced by a frequency-controlled servo motor. Documentation available. On-site inspection is possible.

Maszyna do nawijania płaskiego drutu

Lju SWM2010

Niemcy

2011

używany

na żądanie

INNO28748

A fully automated winding machine for wire processing is available.Winding capacity (depending on the number of turns):approx. 120 coils/h, wire thickness: 5x1mm/15x55mm, inner diameter: 23mm-66mm, max. spool weight: 7kg, machine dimensions X/Y/Z: approx. 5000mm/2500mm/2000mm, operating hours (still in use until the end of April): approx. 16625h.Units: 6-fold wire uncoiler, wire straightening unit, milling unit, coiling, cutting and ejection system.Product materials: enameled copper wires and insulating materials without dust or adhesive residues.Documentation available.On-site inspection is possible.

Cnc maszyna do nawijania sprezyn

Bb Spring (babbio) CNC 800

Niemcy

1995

używany

na żądanie

INNO28437

A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a scenker spring device. The motor and drive of the machine are defective. Documentation available.

Haspel pojedynczy

Schwabe MHM

Niemcy

nieznany

używany

na żądanie

INNO28337

Coil outer diameter: 650mm, max. sheet width: 150mm, max. coil weight: 80kg, mandrel height: 1000mm, spreading range: 230mm-445mm, support arm length: 600mm. On-site inspection is possible.

Zwijak

Wanzke PM 1000/DC-S / PMS500-DC

Niemcy

1995

używany

na żądanie

INNO27840

Two Wenzke rewinders are available. 1) Wenzke PM 1000/DC-S (heavy version), max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1995. 2) Wenzke PMS 500, max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1988. Documentation partially available. On-site inspection is possible. Individual sale possible.

Ciągarnia drutu

Koch KHZ 6300

Niemcy

1992

używany

na żądanie

INNO27758

A wire drawing plant is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 6300, year of manufacture: 1992, number of pulls per block: 1, drawing drum diameter: 700mm, pulling force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of manufacture: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Documentation available. On-site inspection is possible.

Ciągarnia drutu

Koch KHZ 5000

Niemcy

1993

używany

na żądanie

INNO27180

A wire drawing unit is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 5000, year of manufacture: 1993, number of draws per block: 1, drawing drum diameter: 700mm, drawing force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spooler Koch KHS 1250, year of construction: 1993, wire diameter: 5-8.5mm, strength: 55-70daN/mm², spooling speed: 7m/s, filling weight: approx. 3000kg, dimensions X/Y/Z: approx. 3100mm/3000mm/1700mm. Including hydraulic unit G13 AK. Documentation available.

Maszyna do wykrawania i gięcia

Bihler GRM-50

Niemcy

1979

używany

na żądanie

INNO24616

Three Bihler GRM-50 are available, year of manufacture: 2x 1979, 1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg.

Automatyczna maszyna do wykrawania i gięcia

Weber

Niemcy

nieznany

używany

na żądanie

INNO26514

Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.

Zaciskarka środkowa

Somavis T-8K / T-8L

Niemcy

1983

używany

na żądanie

INNO15816

There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min.

Maszyna spiralizująca

Spirka DW 12A

Niemcy

1998

używany

na żądanie

INNO25854

Number of coil carriers: 12, rotor speed: 450/min, coil volume: 550cm³, wire tension: 1-16N, pitch: 5-90mm, connected load: 5kVA, with documentation, is already dismantled.

Maszyna do wyżarzania oporowego

Tecno Induction

Niemcy

2016

używany

na żądanie

INNO25790

Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes.

Maszyna nawijająca

Schmidt SD20-30/7

Niemcy

1993

używany

na żądanie

INNO25776

Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools.

Automat do gięcia drutu

Ghislanzoni Umberto PU4 SP

Niemcy

1981

używany

na żądanie

INNO22627

Including documentation.

Nawijarka

Rudolph & Koschinski

Niemcy

nieznany

używany

na żądanie

INNO24361

The machine is a rewinding machine for producing cables, with radial force measuring axes Honigmann, including documentation.

Maszyna do prostowania i cięcia

Wafios R31

Niemcy

1997

używany

na żądanie

INNO24128

Wire range: 3-6mm, speed: 60-80/min, max. coil weight: 1t.

Giętarka do drutu z dwoma głowicami

Amda

Niemcy

2013

używany

na żądanie

INNO22234

Also suitable for processing flat steel, including documentation, without accessories, machine was scarcely used.

Nawijarka

Rosendahl RA 7061

Niemcy

1987

używany

na żądanie

INNO21279

Max. coil weight: 10t, controls: SIEMENS S5, without documentation.

Ciągarka do drutu

Lukas DCI 11/ 50-360

Niemcy

2002

używany

na żądanie

INNO21074

Max. speed: 360m/min, power: 5.6kW.