Prostownica

Arku RM 3060.4/21

Niemcy

1999

używany

na żądanie

INNO27162

Material width: 600mm, max. sheet thickness: 4mm, number of straightening rollers: 21, straightening roller diameter: 30mm, material cross-section: 1800mm², speed: 6-36m/min, dimensions X/Y/Z: approx. 1500mm/2000mm/1900mm, weight: approx. 3000kg.

więcej

Nożyce do stali profilowanej

Geka Hydracop HYD-70

Niemcy

1992

używany

na żądanie

INNO27155

Punching force: 70t, max. punching capacity: 28mm/20mm, max. stroke: 80mm, working speed 19mm/20mm stroke: 48/37. Flat steel shears: Blade length: 455mm, max. cutting capacity length/thickness: 450mm/15mm. Angle steel shears: 90°: 130mm/130mm/13mm, 45°: 70mm/70mm/7mm. Round steel shears: Diameter: 45mm. Square steel shears: 45mm/45mm. Notch depth: 90mm, notch width: 52mm, material thickness: 13mm. Dimensions X/Y/Z: approx. 1300mm/2100mm/1800mm, weight: approx. 2400kg.

więcej

Gratownica

Lissmac SBM-S 1000

Niemcy

2007

używany

na żądanie

INNO27071

A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available.

więcej

Nożyce do kęsów

Peddinghaus 214/200

Niemcy

nieznany

używany

na żądanie

INNO27021

A Peddinghaus 214/200 billet shear is available. Cutting capacity: square: 70mm, round: 80mm, flat: 180mm x 35mm/250mm x 28mm, weight: approx. 5000kg.

więcej

Nożyce gilotynowe

Eht TSS 4-60

Niemcy

1999

używany

na żądanie

INNO26985

Cutting length: 6000mm, max. material thickness: 4mm, blade length: 6000mm, passage from side stop to front stop: 200mm, top blade cutting angle: 1°, backgauge range: 10mm-1000mm, max. adjustment speed: 70mm/s. Dimensions X/Y/Z: approx. 6800mm/3500mm/2300mm, weight: approx. 21000kg. An on-site inspection is possible.

więcej

Nitownica

Böllhoff C-Zangen

Niemcy

1998

używany

na żądanie

INNO26832

There are 3x punch rivet feeders and 2x C-pliers Böllhoff available. Self-pierce rivet feeder: 2x ABF, 1x LG, years of construction: 1998-2003, rivets: 3x4mm and 3x5mm. C-tongs: Year of manufacture: 1998, max. rivet setting pressure: 250bar, max. rivet setting force: 50kN. Documentation available. On-site inspection is possible.

więcej

Maszyna do przycinania

Henning/rotox BVH8K2/SAF 165

Niemcy

2007

używany

na żądanie

INNO26705

There are 2 notching machines available. Rotox SAF 165, year of manufacture: 2007, saw blade diameter: 250mm, speed: 2800rpm, pressure: 6-7bar, weight: 273kg. Hanning BVH8K2, speed: 2700rpm.

więcej

Hydrauliczne nożyce do profili stalowych

Bernardo HPS 90

Niemcy

2018

używany

na żądanie

INNO26601

Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm

więcej

Automatyczna prasa wykrawająca

Halbritter Gmbh HM15

Niemcy

2010

używany

na żądanie

INNO26510

Hydraulic pressure: 200 bar, with documentation and length stop, on-site inspection is possible, was used for cutting steel reinforcement pipes for plastic profiles to length, the machine has currently been standing under cover in an outdoor storage facility for two years, the linear guides are affected by rust film, a function test cannot currently be carried out.

więcej

Centrum nożycowe

Pivatic PivaCut

Niemcy

nieznany

używany

na żądanie

INNO26491

Max. Coil weight: 25t, max. Coil outer diameter: 2500mm, Coil inner diameter: 506-610mm, Finished sheet width: 50-159mm, Strip thickness: 0.6-3mm, with double cone decoiler, threading assembly, straightener (straightener was taken over from an earlier line, Schnutz factory, year of manufacture late 80s - early 90s), loop bridge, strip feed unit, cut-to-length shear, conveyor belt, brush table with gripper, slitting shear (guillotine shear), conveyor belts, stacking unit and gantry gripper with two stacking stations, on-site inspection is possible.

więcej

Prasa do gięcia krawędzi CNC

Trumpf TrumaBend V85S

Niemcy

1999

używany

na żądanie

INNO26378

Max. pressing force: 850kN, max. stroke: 365mm, compressed air supply: 6bar, connected load: 14kVA, weight: 9.95t, with documentation, without tools, was maintained regularly, an inspection is possible.

więcej

Maszyna wykrawająca

Trumpf TRUMATIC 500

Niemcy

1994

używany

na żądanie

INNO26213

Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible.

więcej

Dwuwalcowa giętarka do rur okrągłych

Faccin HCU 1250x3,0

Niemcy

1986

używany

na żądanie

INNO26202

Working width: 1250mm, max sheet thickness: 3mm, with loading table, vacuum lifter, feed table with rollers, ejector, output table, control panel and manual, inspection is possible, available from March 2024.

więcej

Maszyna do wykrawania rowków

Schuler Pressen N 16

Niemcy

1977

używany

na żądanie

INNO25852

Pressing force: 160kN, stroke speed: 200-1000/min, with automatic handling/ infeed and documentation.

więcej

Giętarka trójwalcowa

Haeusler SIHRV 2000x13/10

Niemcy

2001

używany

na żądanie

INNO25715

Working width: 2000mm, max. sheet thickness: 13mm, can be used horizontally and vertically, with decoiler, decoiler driven and hydraulically adjustable to coil diameter.

więcej

Giętarka czterowalcowa okrągła

Haeusler VRM-hy 3000x120

Niemcy

1990

używany

na żądanie

INNO25714

Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm.

więcej

Giętarka czterowalcowa okrągła

Haeusler VRM-hy 3500x65/55

Niemcy

1981

używany

na żądanie

INNO25713

Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012.

więcej

Giętarka czterorolkowa

Haeusler VRM-hy 3000x110/90

Niemcy

1989

używany

na żądanie

INNO25710

Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices.

więcej

Giętarka czterorolkowa

Haeusler VRM-hy 3000x12

Niemcy

1984

używany

na żądanie

INNO25707

Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls.

więcej

Giętarka czterowalcowa okrągła

Haeusler VRM-hy 2500x20/18

Niemcy

1988

używany

na żądanie

INNO25706

Working width: 2500mm, max. sheet thickness: 20mm, with optical display of roller adjustment, central lubrication, cone bending device and overrun brake.

więcej

Wszystkie oferty / Obróbka metali i obrabiarki / Obróbka blachy stalowej